# SOME DESCRIPTIVE TITLE.# Copyright (C) YEAR Red Hat, Inc.# This file is distributed under the same license as the PACKAGE package.## Translators:# Christopher Meng <cickumqt@gmail.com>, 2012-2013# clumens <clumens@redhat.com>, 2011# Dimitris Glezos <glezos@indifex.com>, 2011# Leah Liu <lliu@redhat.com>, 2010# Tommy He <lovenemesis@gmail.com>, 2012# simonyanix <simonyan@fedoraproject.org>, 2012# Tiansworld <tiansworld@fedoraproject.org>, 2011-2012# Tiansworld <tiansworld@fedoraproject.org>, 2011# Tiansworld <tiansworld@fedoraproject.org>, 2013-2014# Tiansworld <tiansworld@fedoraproject.org>, 2012-2013# Tommy He <lovenemesis@gmail.com>, 2012-2014# wangwenye <wangwenye_wwy@163.com>, 2013# Wei Liu <LLIU@REDHAT.COM>, 2012,2014# yusuf <yusufma77@yahoo.com>, 2011# Tiansworld <tiansworld@fedoraproject.org>, 2011,2013-2014# Yangxin Guan <isyangxin@gmail.com>, 2013# Zamir SUN <zamirs@163.com>, 2014# Tian Shixiong <tiansworld@fedoraproject.org>, 2015. #zanata# Tong Hui <tonghuix@fedoraproject.org>, 2015. #zanata# Leah Liu <lliu@redhat.com>, 2016. #zanata# Tian Shixiong <tiansworld@fedoraproject.org>, 2016. #zanata# mosquito <sensor.wen@gmail.com>, 2016. #zanata# Charles Lee <lchopn@gmail.com>, 2017. #zanata, 2020, 2021, 2022, 2023.# Tian Shixiong <tiansworld@fedoraproject.org>, 2017. #zanata# lexuge <LEXUGEyky@outlook.com>, 2017. #zanata# Ludek Janda <ljanda@redhat.com>, 2018. #zanata, 2020, 2021, 2022.# Pany <pany@fedoraproject.org>, 2018. #zanata# Tian Shixiong <tiansworld@fedoraproject.org>, 2018. #zanata# Pany <pany@fedoraproject.org>, 2019. #zanata# Tian Shixiong <tiansworld@gmail.com>, 2020, 2021, 2022, 2023.# Radek Vykydal <rvykydal@redhat.com>, 2020.# Qiyu Yan <yanqiyu01@gmail.com>, 2020, 2021.# Sundeep Anand <suanand@redhat.com>, 2021, 2022.# tsinglion <tsinglion@gmail.com>, 2021.# Transtats <suanand@redhat.com>, 2022.# kk z <izhaoshuang@163.com>, 2022.# yangyangdaji <1504305527@qq.com>, 2022, 2023.# Yang Yulin <yylteam@icloud.com>, 2022, 2023.# z z <3397542367@qq.com>, 2023.msgid ""msgstr """Project-Id-Version: anaconda 32.22\n""Report-Msgid-Bugs-To: \n""POT-Creation-Date: 2026-09-25 08:11+0000\n""PO-Revision-Date: 2026-08-07 16:38+0000\n""Last-Translator: Zhaojiang Sun <anstonsolar@outlook.com>\n""Language-Team: Chinese (Simplified) <https://translate.fedoraproject.org/""projects/anaconda-webui/anaconda-webui/zh_CN/>\n""Language: zh_CN\n""MIME-Version: 1.0\n""Content-Type: text/plain; charset=UTF-8\n""Content-Transfer-Encoding: 8bit\n""Plural-Forms: nplurals=1; plural=0;\n""X-Generator: Weblate 2026.8\n"#: src/components/storage/installation-method/InstallationDestination.jsx:143#: src/components/storage/installation-method/InstallationDestination.jsx:279msgid "$0 $1"msgstr "$0 $1"#: src/components/storage/mount-point-mapping/MountPointMapping.jsx:349#: src/components/storage/installation-method/InstallationDestination.jsx:163#: src/components/storage/installation-method/InstallationDestination.jsx:272msgid "$0 ($1)"msgstr "$0 ($1)"#: src/components/storage/cockpit-storage-integration/CheckStorageDialog.jsx:74#: src/components/storage/Common.jsx:58msgid "$0 error"msgid_plural "$0 errors"msgstr[0] "$0 个错误"#: src/components/app.jsx:84msgid "$0 installation"msgstr "$0 安装"#: src/components/HeaderKebab.jsx:47msgid "$0 installer"msgstr "$0 安装程序"#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:244msgid """$0 is an MBR extended partition that contains logical partitions. Removing ""all logical partitions will also automatically remove the extended partition."msgstr """$0 是包含逻辑分区的 MBR 扩展分区。删除所有逻辑分区也会自动删除扩展分区。"#: src/components/storage/installation-method/usePageComplete.jsx:114msgid "$0 is required, but only $1 is available."msgstr "需要 $0 ，但只有 $1 可用。"#: src/components/storage/cockpit-storage-integration/CheckStorageDialog.jsx:90#: src/components/storage/Common.jsx:74msgid "$0 warning"msgid_plural "$0 warnings"msgstr[0] "$0 个警告"#: src/components/storage/StorageReview.jsx:290msgid "$0 will be deleted"msgstr "$0 将被删除"#: src/components/storage/mount-point-mapping/MountPointMapping.jsx:190msgid "'$0' filesystem cannot be on an encrypted block device"msgstr "'$0' 文件系统不能位于加密块设备上"#: src/helpers/storage.js:267msgid "'$0' must be assigned to $1"msgstr "'$0' 必须分配给 $1"#: src/helpers/storage.js:270msgid "'$0' must be on a device formatted to '$1'"msgstr "'$0' 必须位于格式化为 '$1' 的设备上"#: src/helpers/storage.js:261msgid """'$0' must be on an EFI System Partition. The selected partition uses a FAT ""filesystem, but is not marked as an ESP. Set the partition type to EFI ""System and enable the esp flag."msgstr """'$0' 必须位于 EFI 系统分区（ESP）上。选中的分区使用了 FAT 文件系统，但并未被""标记为 ESP。将分区类型设置为 EFI System 并启用 esp 标志。"#: src/components/storage/cockpit-storage-integration/CheckStorageDialog.jsx:272msgid """'$0' partition on MDRAID device $1 found. Bootloader partitions on MDRAID ""devices are not supported."msgstr """在 MDRAID 设备 $1 上发现“$0”分区。不支持 MDRAID 设备上的引导加载程序分区。"#: src/components/users/Accounts.jsx:256msgid """A standard user account with admin access for making system-wide changes."msgstr "一个拥有管理员权限的标准用户账户，可执行系统级更改。"#: src/components/installation/InstallationNonCriticalErrorDialog.jsx:48msgid "Abort installation"msgstr "中止安装"#: src/components/HeaderKebab.jsx:105msgid "About"msgstr "关于"#: src/components/review/ReviewConfiguration.jsx:254msgid "Account"msgstr "账户"#: src/components/storage/StorageReview.jsx:248#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:142msgid "Actions"msgstr "操作"#: src/components/datetime/CustomNTPModal.jsx:232msgid "Add another server..."msgstr "添加其它服务器..."#: src/components/storage/mount-point-mapping/MountPointMapping.jsx:644msgid "Add mount"msgstr "添加挂载"#: src/components/software/SoftwareSelection.jsx:122msgid "Add-ons for your chosen environment"msgstr "适用于您选定环境的附加组件"#: src/components/software/SoftwareSelection.jsx:131msgid "Add-ons not specific to your environment"msgstr "不特定于您环境的附加组件"#: src/components/localization/InstallationLanguage.jsx:148msgid "Additional languages"msgstr "其他语言"#: src/components/software/SoftwareSelection.jsx:156msgid "Additional software for the selected environment"msgstr "用于已选环境的附加软件"#: src/components/storage/cockpit-storage-integration/CockpitStorageIntegration.jsx:55msgid "All changes made in the storage editor take effect immediately."msgstr "在存储编辑器中所做的所有更改都会立即生效。"#: src/components/storage/installation-method/EncryptedDevices.jsx:133msgid "All devices using this passphrase will be unlocked"msgstr "所有使用此密码的设备都将被解锁"#: src/manifest.json:0msgid "Anaconda"msgstr "Anaconda"#: src/login.html:8 src/index.html:20msgid "Anaconda Web UI"msgstr "Anaconda Web 界面"#: src/components/HeaderKebab.jsx:77msgid "Anaconda project page"msgstr "Anaconda 项目页面"#: src/components/storage/scenarios/mount-point-mapping/index.js:21msgid "Apply mount point assignment and install"msgstr "应用挂载点分配并安装"#: src/components/network/CockpitNetworkConfiguration.jsx:64msgid "Applying changes..."msgstr "正在应用更改..."#: src/components/storage/scenarios/mount-point-mapping/index.js:22msgid """Assign partitions to mount points. Useful for pre-configured custom layouts."msgstr "将分区分配给挂载点。对于预配置的自定义布局很有用。"#: src/components/Error.jsx:396msgid "Automatic log file upload"msgstr "自动上传日志文件"#: src/components/datetime/DateAndTime.jsx:133msgid "Automatically set date and time, using time servers"msgstr "使用时间服务器自动设置日期与时间"#: src/components/datetime/Timezone.jsx:140#: src/components/datetime/Timezone.jsx:141msgid "Automatically set timezone"msgstr "自动设置时区"#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:200msgid "Available free space: $0. Installation requires: $1."msgstr "可用空间: $0。安装需要: $1。"#: src/components/Error.jsx:668 src/components/Error.jsx:693#: src/components/AnacondaWizardFooter.jsx:62msgid "Back"msgstr "返回"#: src/components/software/SoftwareSelection.jsx:63msgid "Base environment"msgstr "基本环境"#: src/components/Error.jsx:367msgid "Brief description of the issue"msgstr "问题简述"#: src/components/Error.jsx:356msgid "Bug report details"msgstr "缺陷报告详情"#: src/components/Error.jsx:206msgid "Bugzilla API key"msgstr "Bugzilla API 密钥"#: src/components/AnacondaHeader.jsx:73msgid """By continuing to use this software, you understand and accept the risks ""associated with pre-released software, that you intend to use this for ""testing and development purposes only and are willing to report any bugs or ""issues in order to enhance this work."msgstr """点击 \"继续\" ，则说明您了解并接受预发行版的风险，只将该软件用于测试和开发，""并且愿意报告所有程序错误或问题，以便改进本软件。"#: src/components/datetime/CustomNTPModal.jsx:252#: src/components/storage/cockpit-storage-integration/CockpitStorageIntegration.jsx:72#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:211#: src/components/storage/installation-method/InstallationDestination.jsx:378#: src/components/Error.jsx:861 src/components/localization/Keyboard.jsx:280#: src/components/review/Hostname.jsx:127msgid "Cancel"msgstr "取消"#: src/components/review/Hostname.jsx:125msgid "Change"msgstr "变更"#: src/components/storage/installation-method/InstallationDestination.jsx:350msgid "Change destination"msgstr "更改目标位置"#: src/components/review/Hostname.jsx:87msgid "Change hostname"msgstr "更改主机名"#: src/components/storage/installation-method/usePageComplete.jsx:128msgid "Change partition layout"msgstr "更改分区布局"#: src/components/localization/Keyboard.jsx:213#: src/components/localization/Keyboard.jsx:308#: src/components/localization/Keyboard.jsx:359msgid "Change system keyboard layout"msgstr "更改系统键盘布局"#: src/components/storage/cockpit-storage-integration/CockpitStorageIntegration.jsx:127msgid """Changes made here will immediately affect the system. There is no 'undo'."msgstr "此处所做的更改将立即影响系统。无法“撤消”。"#: src/components/review/ReviewConfiguration.jsx:191msgid "Checking installation configuration..."msgstr "正在检查安装配置..."#: src/components/storage/cockpit-storage-integration/CheckStorageDialog.jsx:475#: src/components/storage/cockpit-storage-integration/CheckStorageDialog.jsx:481#: src/components/storage/storage-configuration/DiskEncryption.jsx:39msgid "Checking storage configuration"msgstr "正在检查存储配置"#: src/components/common/MenuSearch.jsx:112msgid "Clear search"msgstr "清除搜索"#: src/components/storage/Common.jsx:27msgid "Click 'Next' again to proceed despite these warnings."msgstr "再次点击“下一步”以忽略这些警告继续操作。"#: src/components/network/CockpitNetworkConfiguration.jsx:64#: src/components/storage/installation-method/EncryptedDevices.jsx:181#: src/components/storage/installation-method/InstallationDestination.jsx:383msgid "Close"msgstr "关闭"#: src/components/storage/cockpit-storage-integration/CockpitStorageIntegration.jsx:131msgid "Close storage editor"msgstr "关闭存储编辑器"#: src/components/storage/cockpit-storage-integration/CheckStorageDialog.jsx:328msgid """Cockpit storage did not provide the passphrase to unlock encrypted device."msgstr "Cockpit 存储没有提供解锁加密设备的密码。"#: src/components/installation/InstallationProgress.jsx:279msgid "Completed"msgstr "已完成"#: src/components/review/ReviewConfiguration.jsx:212msgid "Configuration is incomplete"msgstr "配置未完成"#: src/components/datetime/CustomNTPModal.jsx:270msgid "Configure NTP servers"msgstr "配置 NTP 服务器"#: src/components/datetime/CustomNTPModal.jsx:154msgid "Configure custom NTP servers"msgstr "配置自定义 NTP 服务器"#: src/components/network/CockpitNetworkConfiguration.jsx:40msgid "Configure network"msgstr "配置网络"#: src/components/storage/cockpit-storage-integration/CockpitStorageIntegration.jsx:117msgid "Configure storage"msgstr "配置存储"#: src/components/storage/cockpit-storage-integration/CheckStorageDialog.jsx:682msgid "Configure storage again"msgstr "再次配置存储"#: src/components/users/Accounts.jsx:208 src/components/users/Accounts.jsx:411#: src/components/storage/storage-configuration/DiskEncryption.jsx:96msgid "Confirm passphrase"msgstr "确认密码"#: src/components/storage/cockpit-storage-integration/CheckStorageDialog.jsx:667msgid "Continue"msgstr "继续"#: src/components/installation/InstallationNonCriticalErrorDialog.jsx:41#: src/components/AnacondaWizardFooter.jsx:126msgid "Continue installation"msgstr "继续安装"#: src/components/installation/InstallationNonCriticalErrorDialog.jsx:28msgid "Continue installation?"msgstr "继续安装？"#: src/components/storage/cockpit-storage-integration/CheckStorageDialog.jsx:620msgid "Continue with installation"msgstr "继续安装"#: src/components/storage/Common.jsx:40msgid "Correct these issues before continuing."msgstr "继续前请修正这些问题。"#: src/components/users/index.js:20msgid "Create Account"msgstr "创建账户"#: src/components/users/Accounts.jsx:318msgid "Create account"msgstr "创建账户"#: src/components/storage/installation-method/InstallationDestination.jsx:66msgid "Currently installed: $0"msgstr "目前安装：$0"#: src/components/storage/mount-point-mapping/MountPointMapping.jsx:231msgid "Custom"msgstr "自定义"#: src/components/datetime/DateAndTime.jsx:172msgid "Date"msgstr "日期"#: src/components/datetime/DateAndTime.jsx:151#: src/components/datetime/index.js:21msgid "Date and time"msgstr "日期和时间"#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:395msgid "Delete partition"msgstr "删除分区"#: src/components/storage/StorageReview.jsx:348msgid "Deletion of certain partitions may prevent $0 from booting: $1"msgstr "删除某些分区可能会导致$0无法启动：$1"#: src/components/Error.jsx:262msgid "Description"msgstr "描述"#: src/components/storage/installation-method/InstallationDestination.jsx:264msgid "Destination"msgstr "目标位置"#: src/components/storage/installation-method/EncryptedDevices.jsx:52msgid "Destination is encrypted"msgstr "目标位置已加密"#: src/components/Error.jsx:267msgid "Detailed description of the issue"msgstr "问题详述"#: src/components/storage/cockpit-storage-integration/CheckStorageDialog.jsx:646msgid "Detected valid storage layout:"msgstr "检测到有效的存储布局："#: src/components/storage/mount-point-mapping/MountPointMapping.jsx:620#: src/components/storage/StorageReview.jsx:246msgid "Device"msgstr "设备"#: src/components/storage/mount-point-mapping/MountPointMapping.jsx:388msgid "Duplicate device."msgstr "重复的设备。"#: src/components/storage/mount-point-mapping/MountPointMapping.jsx:237msgid "Duplicate mount point."msgstr "重复的挂载点。"#: src/components/users/Accounts.jsx:342 src/components/users/Accounts.jsx:393msgid "Enable root account"msgstr "启用 root 账户"#: src/components/storage/storage-configuration/DiskEncryption.jsx:63msgid "Encrypt my data"msgstr "加密我的数据"#: src/components/storage/StorageReview.jsx:249msgid "Encrypted"msgstr "已加密"#: src/components/storage/storage-configuration/DiskEncryption.jsx:106msgid "Encryption"msgstr "加密"#: src/components/login/LoginPage.jsx:88msgid "Enter PIN"msgstr ""#: src/components/login/LoginPage.jsx:77msgid "Enter PIN to access the installer"msgstr ""#: src/components/Error.jsx:203msgid """Enter your Bugzilla API key to create a bug report. You will be able to ""review and edit the bug details in the next step."msgstr """输入您的 Bugzilla API 密钥以创建缺陷报告。 您可以在下一步查看与编辑缺陷详情。"#: src/components/Error.jsx:279msgid "Environment"msgstr "环境"#: src/components/storage/scenarios/erase-all/index.js:20msgid "Erase data and install"msgstr "删除数据内容并安装"#: src/components/Error.jsx:818msgid "Error details"msgstr "错误详情"#: src/components/installation/InstallationProgress.jsx:249msgid "Exit to live desktop"msgstr "退出到 live 桌面"#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:241#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:248msgid "Extended partition"msgstr "扩展分区"#: src/components/Error.jsx:642msgid "Failed to report issue"msgstr "报告问题失败"#: src/components/localization/Keyboard.jsx:202msgid "Failed to save layouts"msgstr "保存布局失败"#: src/components/storage/cockpit-storage-integration/CockpitStorageIntegrationSidebar.jsx:80msgid "Fedora linux requires at least $0 of disk space."msgstr "Fedora linux 至少需要 $0 的磁盘空间。"#: src/components/installation/InstallationProgress.jsx:243msgid "Finalization"msgstr "最后确定"#: src/components/installation/InstallationProgress.jsx:241msgid """Finalizing: The system configuration is complete. Finalizing installation ""may take a few moments."msgstr "最终确定：系统配置已经完成。最终完成安装可能需要一些时间。"#: src/components/localization/Keyboard.jsx:218msgid "Find layout"msgstr "查找布局"#: src/components/users/Accounts.jsx:409msgid """For better security, avoid using the root account directly. Instead, use the ""local account above to manage the system."msgstr """为了更好的安全性，避免直接使用root账户。相反，请使用以上的本地账户来管理系""统。"#: src/components/users/Accounts.jsx:258msgid "Full name"msgstr "全名"#: src/components/users/Accounts.jsx:194msgid "Full name cannot contain colon characters"msgstr "全名不能含有冒号"#: src/components/storage/StorageReview.jsx:251msgid "Helper text"msgstr "帮助文本"#: src/components/Error.jsx:223msgid "Hide API key"msgstr "隐藏 API 密钥"#: src/components/login/LoginPage.jsx:94#, fuzzy#| msgid "Hide API key"msgid "Hide PIN"msgstr "隐藏 API 密钥"#: src/components/Password.jsx:265msgid "Hide confirmed password"msgstr "隐藏确认密码"#: src/components/storage/installation-method/EncryptedDevices.jsx:166msgid "Hide passphrase"msgstr "隐藏密码"#: src/components/Password.jsx:229msgid "Hide password"msgstr "隐藏密码"#: src/components/review/Hostname.jsx:91 src/components/review/Hostname.jsx:145msgid "Hostname"msgstr "主机名"#: src/components/storage/installation-method/InstallationScenario.jsx:163msgid "How would you like to install?"msgstr "您想如何安装？"#: src/components/review/ReviewConfiguration.jsx:309msgid "I understand that all existing data will be erased"msgid_plural """I understand that all existing data will be erased from the selected disks"msgstr[0] "我了解所选磁盘上的所有现有数据将被删除"#: src/components/review/ReviewConfiguration.jsx:314msgid "I understand that some existing data will be erased"msgstr "我了解部分现有数据将被删除"#: src/components/review/ReviewConfiguration.jsx:315msgid "I understand that some partitions will be modified"msgstr "我了解有些分区会被修改"#: src/components/review/Hostname.jsx:114msgid "If empty, hostname will be transient and set by network information."msgstr "如果为空，主机名将是临时的并由网络信息设置。"#: src/components/storage/installation-method/InstallationScenario.jsx:126msgid """If none of the options above apply, use the storage editor to create a ""custom partitioning before proceeding."msgstr ""#: src/components/storage/cockpit-storage-integration/CockpitStorageIntegrationSidebar.jsx:56msgid "If you are configuring partitions the following are required:"msgstr "如果要配置分区，则需要以下内容："#: src/components/Error.jsx:411msgid """If you do not consent to automatic log file upload, you can $0 instead. ""Manual reporting allows you to review and selectively attach log files ""yourself."msgstr """如果您不同意自动上传日志文件，您可以改为 $0。手动报告允许您自己审查并选择性的""附加日志文件。"#: src/components/AnacondaHeader.jsx:76msgid """If you do not understand or accept the risks, then please exit this program."msgstr "如果您不了解或不接受此风险，请点击 \"退出\" 按钮退出程序。"#: src/components/Error.jsx:328msgid """If your issue matches one of the bugs above, you can open it and add your ""information there instead of creating a duplicate report."msgstr ""#: src/components/installation/InstallationProgress.jsx:284msgid "In progress"msgstr "进行中"#: src/components/app.jsx:33msgid "Initializing..."msgstr "初始化中..."#: src/components/storage/scenarios/use-free-space/index.js:27#: src/components/storage/scenarios/use-configured-storage/index.js:25#: src/components/storage/scenarios/use-configured-storage/index.js:39msgid "Install"msgstr "安装"#: src/components/installation/InstallationProgress.jsx:219#: src/components/Error.jsx:849msgid "Installation failed"msgstr "安装失败"#: src/components/storage/installation-method/index.js:24msgid "Installation method"msgstr "安装方案"#: src/components/installation/InstallationProgress.jsx:61msgid "Installation of the system failed"msgstr "系统安装失败"#: src/components/installation/InstallationProgress.jsx:98msgid "Installation of the system failed: $0"msgstr "系统安装失败：$0"#: src/components/review/ReviewConfiguration.jsx:269msgid "Installation type"msgstr "安装类型"#: src/components/installation/InstallationProgress.jsx:221msgid "Installing"msgstr "正在安装"#: src/components/storage/installation-method/InstallationDestination.jsx:310msgid "Insufficient disk space"msgstr "磁盘空间不足"#: src/components/login/LoginPage.jsx:68msgid "Invalid PIN. Please try again."msgstr ""#: src/components/storage/cockpit-storage-integration/CheckStorageDialog.jsx:255msgid """Invalid RAID configuration detected. If your RAID array is created directly ""on top of disks, a partition table must be created on the array. If your ""RAID array is created on top of partitions, it must contain a single ""filesystem or format (e.g., LVM PV). Any existing partitions on this array ""will be ignored."msgstr """检测到无效的 RAID 配置。如果您的 RAID 阵列直接在磁盘上创建，则必须在阵列上创""建分区表。如果您的 RAID 阵列在分区上创建，则它必须包含单个文件系统或格式（例""如 LVM PV）。此阵列上的任何现有分区都将被忽略。"#: src/components/datetime/CustomNTPModal.jsx:92msgid "Invalid hostname"msgstr "无效主机名"#: src/components/review/ReviewConfiguration.jsx:208msgid "Jump to first incomplete step"msgstr "跳转至第一个未完成的步骤"#: src/components/storage/scenarios/use-free-space/index.js:28msgid """Keep current disk layout and use available space, to dual-boot with another ""OS."msgstr "保留当前磁盘布局并使用可用空间，以便与另一个操作系统双启动。"#: src/components/localization/InstallationLanguage.jsx:254msgid "Keyboard"msgstr "键盘"#: src/components/storage/storage-configuration/DiskEncryption.jsx:75msgid "Keyboard layout during boot"msgstr "启动期间的键盘布局"#: src/components/localization/InstallationLanguage.jsx:240#: src/components/review/ReviewConfiguration.jsx:234msgid "Language"msgstr "语言"#: src/components/storage/cockpit-storage-integration/CockpitStorageIntegration.jsx:65msgid "Launch storage editor"msgstr "启动存储编辑器"#: src/components/Error.jsx:387msgid "Learn more about restricted access in the configuration"msgstr "在配置中详细了解受限访问"#: src/components/users/Accounts.jsx:209msgid "Leave both passphrase fields empty to use an empty password."msgstr "将两个密码框都留空以使用空密码。"#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:138msgid "Location"msgstr "位置"#: src/components/storage/installation-method/EncryptedDevices.jsx:147msgid "Locked devices"msgstr "锁定的设备"#: src/components/login/LoginPage.jsx:118#, fuzzy#| msgctxt "GUI|Advanced Storage|iSCSI|Login|Login"#| msgid "_Log In"msgid "Log in"msgstr "登录(_L)"#: src/components/localization/Keyboard.jsx:122#: src/components/localization/Keyboard.jsx:126msgid "Make current"msgstr "使用当前生效的"#: src/components/storage/mount-point-mapping/index.js:19msgid "Manual disk configuration"msgstr "手动配置磁盘"#: src/components/storage/mount-point-mapping/index.js:20msgid "Manual disk configuration: Mount point mapping"msgstr "手动磁盘配置：挂载点映射"#: src/components/review/Hostname.jsx:111msgid "May contain letters, numbers, and dashes."msgstr "可能包含字母、数字和破折号。"#: src/components/storage/StorageReview.jsx:86msgid "May need more free space"msgstr "可能需要更多空闲空间"#: src/components/Password.jsx:56msgid "Medium"msgstr "中等"#: src/components/storage/installation-method/InstallationDestination.jsx:313msgid "Minimum of $0 required"msgstr "最低要求为 $0"#: src/components/storage/mount-point-mapping/MountPointMapping.jsx:137msgid "Mismatch between parent device and child device reformat selection."msgstr "父设备和子设备重新格式化选择不匹配。"#: src/components/storage/mount-point-mapping/MountPointMapping.jsx:619#: src/components/storage/StorageReview.jsx:250msgid "Mount point"msgstr "挂载点"#: src/components/storage/scenarios/mount-point-mapping/index.js:23#: src/components/storage/mount-point-mapping/MountPointMapping.jsx:617msgid "Mount point assignment"msgstr "挂载点配置"#: src/components/localization/Keyboard.jsx:144#: src/components/localization/Keyboard.jsx:148msgid "Move down"msgstr "向下移动"#: src/components/localization/Keyboard.jsx:133#: src/components/localization/Keyboard.jsx:137msgid "Move up"msgstr "向上移动"#: src/components/Password.jsx:31msgid "Must be at least $0 characters"msgstr "必须至少包含$0字符"#: src/components/Error.jsx:676msgid "My issue is different, continue"msgstr ""#: src/components/datetime/CustomNTPModal.jsx:157msgid "NTP Servers"msgstr "NTP 服务器"#: src/components/datetime/CustomNTPModal.jsx:205msgid "NTS"msgstr "NTS"#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:139msgid "Name"msgstr "名称"#: src/components/storage/StorageReview.jsx:84msgid "Needs at least $0"msgstr "至少需要 $0"#: src/components/network/index.js:19msgid "Network"msgstr "网络"#: src/components/network/CockpitNetworkConfiguration.jsx:46#: src/components/network/index.js:20msgid "Network Configuration"msgstr "网络配置"#: src/components/Error.jsx:726msgid """Network not available. Configure the network in the top bar menu to report ""the issue."msgstr "网络不可用。在顶部栏菜单中配置网络以报告问题。"#: src/components/Error.jsx:727msgid "Network not available. Configure the network to report the issue."msgstr "网络不可用。请配置网络以报告该问题。"#: src/components/network/NetworkConfiguration.jsx:53msgid "Network plugin failed"msgstr "网络插件失败"#: src/components/Error.jsx:658 src/components/AnacondaWizardFooter.jsx:71msgid "Next"msgstr "下一个"#: src/components/storage/mount-point-mapping/MountPointMapping.jsx:624#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:144msgid "No devices"msgstr "无设备"#: src/components/storage/installation-method/InstallationDestination.jsx:125msgid "No disks available"msgstr "没有可用的磁盘"#: src/components/storage/installation-method/InstallationDestination.jsx:322msgid "No disks selected"msgstr "未选择任何磁盘"#: src/components/localization/Keyboard.jsx:47msgid "No keyboard layouts selected"msgstr "未选择任何键盘布局"#: src/components/localization/Keyboard.jsx:240msgid "No layouts selected yet"msgstr "尚未选择任何布局"#: src/components/common/MenuSearch.jsx:135msgid "No results found"msgstr "未找到结果"#: src/components/localization/Keyboard.jsx:427msgid """No valid VConsole keymap can be obtained for the selected keyboard ""layout(s). Please make a different keyboard layout selection."msgstr "无法为所选的键盘布局获取有效的VConsole键位映射。请尝试其他键盘布局。"#: src/components/storage/installation-method/usePageComplete.jsx:112msgid "Not enough available free space"msgstr "没有足够可用剩余空间"#: src/components/storage/scenarios/use-free-space/UseFreeSpace.jsx:51msgid "Not enough free space on the selected disks."msgstr "所选磁盘中没有足够剩余空间。"#: src/components/storage/scenarios/erase-all/EraseAll.jsx:43msgid "Not enough space on selected disks."msgstr "所选磁盘中没有足够空间。"#: src/components/AnacondaHeader.jsx:70msgid """Notice: This is pre-released software that is intended for development and ""testing purposes only. Do NOT use this software for any critical work or for ""production environments."msgstr """注意：该预发行软件仅用于开发和测试。绝不要在任何关键工作及生产环境中使用此软""件。"#: src/components/Error.jsx:181msgid "Open Bugzilla bug entry form"msgstr "打开 Bugzilla 缺陷报告表单"#: src/components/review/ReviewConfiguration.jsx:223msgid "Operating system"msgstr "操作系统"#: src/components/datetime/CustomNTPModal.jsx:161msgid "Options"msgstr "选项"#: src/components/localization/Keyboard.jsx:96msgid "Other keyboards"msgstr "其他键盘"#: src/components/storage/cockpit-storage-integration/CockpitStorageIntegrationSidebar.jsx:88msgid "Partitions (advanced)"msgstr "分区（高级）"#: src/components/users/Accounts.jsx:205 src/components/users/Accounts.jsx:407#: src/components/storage/installation-method/EncryptedDevices.jsx:150#: src/components/storage/installation-method/EncryptedDevices.jsx:157#: src/components/storage/storage-configuration/DiskEncryption.jsx:93msgid "Passphrase"msgstr "密码"#: src/components/storage/installation-method/EncryptedDevices.jsx:114msgid "Passphrase did not match any locked device"msgstr "密码与任何锁定的设备都不匹配"#: src/components/Password.jsx:278msgid "Passphrases must match"msgstr "密码必须匹配"#: src/components/installation/InstallationProgress.jsx:273msgid "Pending"msgstr "待办的"#: src/components/Error.jsx:94msgid "Please attach the log file $0 to the issue."msgstr "请将日志文件 $0 附加到问题中。"#: src/components/login/LoginPage.jsx:44#, fuzzy#| msgid "Please enter a valid name."msgid "Please enter a PIN"msgstr "请输入有效名称。"#: src/components/storage/installation-method/InstallationDestination.jsx:325msgid "Please select at least one disk to continue"msgstr "请至少选择一个磁盘以继续"#: src/components/datetime/CustomNTPModal.jsx:198msgid "Pool"msgstr "池"#: src/components/Error.jsx:296#, fuzzy#| msgid "No mountable devices found"msgid "Potential duplicate bugs found"msgstr "未找到可挂载设备"#: src/components/HeaderKebab.jsx:48msgid "Powered by Anaconda"msgstr "由 Anaconda 强力驱动"#: src/components/AnacondaHeader.jsx:60msgid "Pre-release"msgstr "预发布"#: src/components/Error.jsx:179msgid "Prefer to report manually? $0"msgstr "倾向于手动报告吗？ $0"#: src/components/storage/cockpit-storage-integration/CheckStorageDialog.jsx:688msgid "Proceed with installation"msgstr "继续安装"#: src/components/Error.jsx:838 src/components/AnacondaWizardFooter.jsx:84#: src/components/AnacondaWizardFooter.jsx:119msgid "Quit"msgstr "退出"#: src/components/AnacondaWizardFooter.jsx:104msgid "Quit installer?"msgstr "退出安装程序？"#: src/components/app.jsx:130msgid "Reading information about the OS failed."msgstr "读取操作系统的信息失败。"#: src/components/app.jsx:74msgid "Reading information about the computer failed."msgstr "读取计算机信息失败。"#: src/components/app.jsx:120msgid "Reading installer configuration failed."msgstr "读取安装程序配置失败。"#: src/components/AnacondaHeader.jsx:34msgid "Reading installer version information failed."msgstr "读取安装程序版本信息失败。"#: src/components/review/Hostname.jsx:35msgid """Real hostname can only contain characters, digits, dashes (not starting or ""ending a character) and dots"msgstr "真实主机名只能包含字符、数字、破折号（不是开始或结束字符）和点"#: src/components/review/Hostname.jsx:31msgid "Real hostname must be 64 characters or less"msgstr "实际主机名必须不超过 64 个字符"#: src/components/installation/InstallationProgress.jsx:248#: src/components/Error.jsx:838 src/components/AnacondaWizardFooter.jsx:84#: src/components/AnacondaWizardFooter.jsx:119msgid "Reboot"msgstr "重启"#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:565msgid """Reboot into Windows to resize BitLocker-encrypted partitions. Make at least ""$0 of free space available for installation."msgstr """重新启动 Windows 以调整 BitLocker 加密分区的大小。为安装提供至少 $0 的可用空""间。"#: src/components/AnacondaWizardFooter.jsx:104msgid "Reboot system?"msgstr "重启系统？"#: src/components/storage/scenarios/use-free-space/UseFreeSpace.jsx:80msgid "Reclaim additional space"msgstr "回收更多空间"#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:116#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:136#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:208msgid "Reclaim space"msgstr "回收空间"#: src/components/storage/scenarios/use-free-space/UseFreeSpace.jsx:80msgid "Reclaim space (required)"msgstr "回收空间（必需）"#: src/components/storage/mount-point-mapping/MountPointMapping.jsx:230msgid "Recommended"msgstr "推荐的"#: src/components/storage/cockpit-storage-integration/CockpitStorageIntegrationSidebar.jsx:65msgid "Recommended partitions:"msgstr "建议的分区："#: src/components/storage/mount-point-mapping/MountPointMapping.jsx:408#: src/components/storage/mount-point-mapping/MountPointMapping.jsx:621msgid "Reformat"msgstr "重新格式化"#: src/components/storage/scenarios/reinstall-fedora/index.js:21#: src/components/storage/scenarios/reinstall-fedora/index.js:23msgid "Reinstall Fedora"msgstr "重新安装 Fedora"#: src/components/storage/mount-point-mapping/MountPointMapping.jsx:435#: src/components/storage/mount-point-mapping/MountPointMapping.jsx:622#: src/components/localization/Keyboard.jsx:155#: src/components/localization/Keyboard.jsx:159msgid "Remove"msgstr "删除"#: src/components/storage/scenarios/erase-all/index.js:21msgid """Remove all partitions on the selected devices, including existing operating ""systems."msgstr "删除所选设备上的所有分区，包括现有操作系统。"#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:120msgid """Remove or resize existing filesystems to free up space for the installation."msgstr "删除或调整现有文件系统的大小以释放安装空间。"#: src/components/datetime/CustomNTPModal.jsx:216msgid "Remove server"msgstr "移除服务器"#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:122msgid """Removing a filesystem will permanently delete all of the data it contains. ""Resizing a partition can free up unused space, but is not risk-free. Be sure ""to have backups of anything important before reclaiming space."msgstr """删除文件系统将永久删除其中包含的所有数据。调整分区大小可以释放未使用的空间，""但并非毫无风险。在回收空间之前，请务必备份所有重要内容。"#: src/components/storage/scenarios/reinstall-fedora/index.js:22msgid "Replace current installation, but keep files in home."msgstr "替换当前安装，但将文件保留在主目录中。"#: src/components/HeaderKebab.jsx:108msgid "Report Issue"msgstr "报告问题"#: src/components/Error.jsx:160msgid """Report an issue or provide feedback by opening the Bugzilla bug entry form ""$0."msgstr "打开 Bugzilla 缺陷报告表单 $0 来报告问题或提供反馈。"#: src/components/Error.jsx:703 src/components/Error.jsx:870msgid "Report issue"msgstr "报告问题"#: src/components/Error.jsx:703msgid "Reporting issue..."msgstr "报告问题中..."#: src/components/storage/mount-point-mapping/MountPointMapping.jsx:229msgid "Required"msgstr "必需的"#: src/components/storage/cockpit-storage-integration/CockpitStorageIntegrationSidebar.jsx:77msgid "Requirements"msgstr "必需的"#: src/components/storage/installation-method/InstallationDestination.jsx:116msgid "Rescan devices"msgstr "重新扫描设备"#: src/components/storage/installation-method/InstallationDestination.jsx:97msgid "Rescanning of the disks failed."msgstr "重新扫描磁盘失败。"#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:539msgid "Resize"msgstr "调整大小"#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:548msgid "Resize partition"msgstr "调整分区大小"#: src/components/storage/StorageReview.jsx:354msgid "Resizing the following partitions from $0: $1"msgstr "从 $0 调整以下分区的大小：$1"#: src/components/Error.jsx:381msgid "Restrict access to the report"msgstr "限制访问报告"#: src/components/Error.jsx:383msgid "Restricts the report to the $0 group. $1"msgstr "将报告限制在 $0 组内。$1"#: src/components/storage/cockpit-storage-integration/CockpitStorageIntegration.jsx:34msgid "Return to installation"msgstr "返回安装"#: src/components/storage/cockpit-storage-integration/CheckStorageDialog.jsx:673msgid "Return to storage editor"msgstr "返回存储编辑器"#: src/components/review/index.js:18 src/components/review/index.js:19msgid "Review and install"msgstr "检查并安装"#: src/components/users/Accounts.jsx:94#, fuzzy#| msgid "no NTP servers have been configured"msgid "Root account has been configured"msgstr "没有配置 NTP 服务器"#: src/components/users/Accounts.jsx:86msgid "Root account is enabled"msgstr "Root 帐户已启用"#: src/components/users/Accounts.jsx:78msgid "Root account is enabled, but no user account has been configured"msgstr "Root账户已启用，但尚未配置任何用户帐户"#: src/components/users/Accounts.jsx:351msgid "Root password has been set."msgstr "Root 密码已设置。"#: src/components/datetime/CustomNTPModal.jsx:245#: src/components/localization/Keyboard.jsx:277#: src/components/review/Hostname.jsx:125msgid "Save"msgstr "保存"#: src/components/installation/Feedback.jsx:27msgid "Scan the QR code with your phone or visit:"msgstr "使用手机扫描二维码或访问："#: src/components/localization/InstallationLanguage.jsx:204msgid "Search for a language"msgstr "搜索语言"#: src/components/software/SoftwareSelection.jsx:159msgid "Search for additional software"msgstr "搜索其他软件"#: src/components/software/SoftwareSelection.jsx:66msgid "Search for an environment"msgstr "搜索环境"#: src/components/localization/Keyboard.jsx:222msgid "Search keyboard layout"msgstr "搜索键盘布局"#: src/components/storage/storage-configuration/DiskEncryption.jsx:110msgid """Secure your data using disk-based encryption. Only applies to new partitions"msgstr "使用基于磁盘的加密保护您的数据。仅适用于新分区"#: src/components/storage/installation-method/InstallationDestination.jsx:375msgid "Select"msgstr "选择"#: src/components/storage/mount-point-mapping/MountPointMapping.jsx:304#: src/components/storage/mount-point-mapping/MountPointMapping.jsx:338msgid "Select a device"msgstr "所选一个设备"#: src/components/datetime/Timezone.jsx:176msgid "Select city"msgstr "选择城市"#: src/components/storage/installation-method/InstallationDestination.jsx:358msgid "Select destination"msgstr "选择目标位置"#: src/components/datetime/Timezone.jsx:157msgid "Select region"msgstr "选择区域"#: src/components/localization/Keyboard.jsx:233msgid "Selected (top = current)"msgstr "已选中（顶部 = 当前）"#: src/components/storage/mount-point-mapping/MountPointMapping.jsx:120msgid "Selected device's format '$0' cannot be reformatted."msgstr "无法重新格式化所选设备的格式 '$0'。"#: src/components/installation/Feedback.jsx:26msgid "Send us feedback on your installation"msgstr "向我们发送有关您的安装的反馈"#: src/components/datetime/CustomNTPModal.jsx:160msgid "Server"msgstr "服务器"#: src/components/datetime/CustomNTPModal.jsx:190msgid "Server is not reachable"msgstr "服务器不可达"#: src/components/review/Hostname.jsx:87msgid "Set custom hostname"msgstr "设置自定义主机名"#: src/components/storage/scenarios/use-free-space/UseFreeSpace.jsx:94msgid "Share disk with other operating systems"msgstr "与其他操作系统共享磁盘"#: src/components/storage/scenarios/use-free-space/UseFreeSpace.jsx:91msgid "Share disk with other operating systems: $0"msgstr "与其它操作系统共享磁盘： $0"#: src/components/datetime/DateAndTime.jsx:192msgid "Show AM/PM"msgstr "显示 AM/PM"#: src/components/Error.jsx:223msgid "Show API key"msgstr "显示 API 密钥"#: src/components/login/LoginPage.jsx:94#, fuzzy#| msgid "Show API key"msgid "Show PIN"msgstr "显示 API 密钥"#: src/components/Password.jsx:265msgid "Show confirmed password"msgstr "显示确认密码"#: src/components/storage/installation-method/EncryptedDevices.jsx:166msgid "Show passphrase"msgstr "显示密码"#: src/components/Password.jsx:229msgid "Show password"msgstr "显示密码"#: src/components/storage/StorageReview.jsx:247msgid "Size"msgstr "大小"#: src/components/installation/InstallationProgress.jsx:233msgid "Software installation"msgstr "软件安装"#: src/components/installation/InstallationProgress.jsx:231msgid """Software installation: Storage configuration complete. The software is now ""being installed onto your device."msgstr "软件安装：存储配置完成。该软件现在正在安装到您的设备上。"#: src/components/software/index.js:19 src/components/software/index.js:20#: src/components/review/ReviewConfiguration.jsx:247msgid "Software selection"msgstr "软件选择"#: src/components/review/ReviewConfiguration.jsx:215msgid """Some installation steps still need to be completed before you can continue."msgstr "在继续之前，您还需要完成一些安装步骤。"#: src/components/storage/scenarios/mount-point-mapping/MountPointMapping.jsx:52msgid "Some required partitions are missing: $0"msgstr "缺少一些必需的分区：$0"#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:141msgid "Space"msgstr "空间"#: src/components/Error.jsx:273msgid "Stacktrace"msgstr "栈回溯"#: src/components/review/ReviewConfiguration.jsx:276msgid "Storage"msgstr "存储"#: src/components/steps.js:35#: src/components/installation/InstallationProgress.jsx:228#: src/components/storage/storage-configuration/index.js:21#: src/components/storage/storage-configuration/index.js:22msgid "Storage configuration"msgstr "存储配置"#: src/components/installation/InstallationProgress.jsx:226msgid "Storage configuration: Storage is currently being configured."msgstr "存储配置：当前正在配置存储。"#: src/components/storage/cockpit-storage-integration/CockpitStorageIntegration.jsx:46msgid "Storage editor"msgstr "存储编辑器"#: src/components/storage/scenarios/use-configured-storage/index.js:26msgid "Storage is based on the configuration from 'Modify storage'."msgstr "存储基于‘修改存储’的配置。"#: src/components/storage/scenarios/use-configured-storage/index.js:40msgid """Storage layout is defined by the kickstart file. The planned partitioning ""layout can be reviewed in the summary step."msgstr """存储布局由 Kickstart 文件定义。您可以在“摘要”步骤中查看预设的分区布局。"#: src/components/storage/cockpit-storage-integration/CockpitStorageIntegration.jsx:94msgid "Storage plugin failed"msgstr "存储插件失败"#: src/components/storage/cockpit-storage-integration/CheckStorageDialog.jsx:618msgid "Storage requirements not met"msgstr "未满足存储要求"#: src/components/Password.jsx:67msgid "Strong"msgstr "强"#: src/components/installation/InstallationProgress.jsx:216msgid "Successfully installed"msgstr "安装成功"#: src/components/storage/installation-method/EncryptedDevices.jsx:109msgid "Successfully unlocked $0."msgstr "成功解锁 $0。"#: src/components/localization/Keyboard.jsx:96msgid "Suggested keyboards"msgstr "建议的键盘"#: src/components/localization/InstallationLanguage.jsx:127msgid "Suggested languages"msgstr "建议语言"#: src/components/users/Accounts.jsx:339 src/components/users/Accounts.jsx:423msgid "System"msgstr "系统"#: src/components/installation/InstallationProgress.jsx:238msgid "System configuration"msgstr "系统配置"#: src/components/installation/InstallationProgress.jsx:236msgid """System configuration: Software installation complete. The system is now ""being configured."msgstr "系统配置： 软件安装完成。现在正在配置系统。"#: src/components/app.jsx:165msgid "The Anaconda installation has stopped unexpectedly."msgstr "Anaconda安装意外停止。"#: src/components/Error.jsx:301msgid """The following open bugs may be related to your issue. Please review them ""before creating a new report."msgstr ""#: src/components/users/Accounts.jsx:47msgid "The following user will be created:"msgid_plural "The following users will be created:"msgstr[0] "将创建以下用户："#: src/components/storage/scenarios/erase-all/EraseAll.jsx:45msgid """The installation needs $0 of disk space; however, the capacity of the ""selected disks is only $1."msgstr "安装需要$0的磁盘空间；但是所选磁盘的容量只有$1。"#: src/components/Error.jsx:778msgid "The installer cannot continue due to a critical error."msgstr "安装程序由于严重错误而无法继续。"#: src/components/Error.jsx:777msgid "The installer cannot continue due to a critical error: $0"msgstr "安装程序由于严重错误而无法继续：$0"#: src/components/storage/storage-configuration/DiskEncryption.jsx:35msgid """The passphrase you have provided contains non-ASCII characters. You may not ""be able to switch between keyboard layouts when typing it."msgstr "您设定的密码中包括非 ASCII 字符。在输入时您可能无法切换键盘布局。"#: src/components/localization/Keyboard.jsx:262msgid """The selected default keyboard layout does not support ASCII characters. ""Please choose an ASCII-capable layout as the default."msgstr """所选的默认键盘布局不支持ASCII字符。请将默认布局更改为支持ASCII字符的布局。"#: src/components/storage/cockpit-storage-integration/CockpitStorageIntegration.jsx:52msgid """The storage editor lets you resize, delete, and create partitions. It can ""set up LVM and much more. It is meant to be used as an advanced utility and ""not intended to be used in a typical installation."msgstr """存储编辑器允许您调整分区大小、删除分区和创建分区。它可以设置 LVM 等。它旨在用""作高级实用程序，不适用于典型安装。"#: src/components/Error.jsx:407msgid """These log files may contain sensitive information such as IP addresses, ""usernames, or other system details."msgstr "这些日志可能包含敏感信息，如 IP 地址、用户名或其他系统信息。"#: src/components/review/Hostname.jsx:51msgid "This hostname can't be submitted"msgstr "无法提交此主机名"#: src/components/AnacondaHeader.jsx:64msgid "This is unstable, pre-release software"msgstr "这是不稳定的预发行软件"#: src/components/storage/storage-configuration/DiskEncryption.jsx:87msgid "This layout will be used for unlocking your system on boot"msgstr "此布局将用于在启动时解锁系统"#: src/components/storage/storage-configuration/DiskEncryption.jsx:43msgid "This may take a moment"msgstr "这可能需要些时间"#: src/components/storage/cockpit-storage-integration/CheckStorageDialog.jsx:476msgid "This will take a few moments"msgstr "这需要一些时间"#: src/components/datetime/DateAndTime.jsx:183msgid "Time"msgstr "时间"#: src/components/datetime/Timezone.jsx:130#: src/components/review/ReviewConfiguration.jsx:241msgid "Timezone"msgstr "时区"#: src/components/Error.jsx:359msgid "Title"msgstr "标题"#: src/components/installation/InstallationProgress.jsx:264msgid "To begin using $0, reboot your system."msgstr "要使用 $0，请重新启动系统。"#: src/components/storage/installation-method/InstallationMethod.jsx:194msgid "To continue, select the devices to install to."msgstr "要想继续，请选择要安装的设备。"#: src/components/storage/scenarios/use-free-space/UseFreeSpace.jsx:53msgid """To use this option, resize or remove existing partitions to free up at least ""$0."msgstr "要使用此选项，请调整大小或删除现有分区以释放至少 $0。"#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:140msgid "Type"msgstr "类型"#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:87msgid "Unable to schedule deletion of $0"msgstr "无法安排删除 $0"#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:89msgid "Unable to schedule resizing of $0"msgstr "无法安排调整 $0 的大小"#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:374msgid "Undo last action"msgstr "撤销上次动作"#: src/components/storage/installation-method/EncryptedDevices.jsx:58#: src/components/storage/installation-method/EncryptedDevices.jsx:178msgid "Unlock"msgstr "解锁"#: src/components/storage/installation-method/EncryptedDevices.jsx:138msgid "Unlock encrypted devices"msgstr "解锁加密设备"#: src/components/storage/installation-method/EncryptedDevices.jsx:64#, fuzzy#| msgid ""#| "Unlock LUKS-encrypted partitions to keep existing data and show more "#| "installation methods."msgid """Unlock encrypted partitions to keep existing data and show more installation ""methods."msgstr "解锁 LUKS 加密分区以保留现有数据并显示更多安装方法。"#: src/components/storage/scenarios/use-configured-storage/index.js:27#: src/components/storage/scenarios/use-configured-storage/index.js:41msgid "Use configured storage"msgstr "使用配置的存储"#: src/components/storage/scenarios/erase-all/index.js:22msgid "Use entire disk"msgstr "使用整个磁盘"#: src/components/storage/cockpit-storage-integration/CheckStorageDialog.jsx:653msgid "Use free space"msgstr "使用空闲空间"#: src/components/users/Accounts.jsx:244msgid "Use local account"msgstr "使用本地账户"#: src/components/storage/cockpit-storage-integration/CheckStorageDialog.jsx:652msgid "Use the RAID device for automatic partitioning"msgstr "使用 RAID 设备进行自动分区"#: src/components/users/Accounts.jsx:494msgid "User creation"msgstr "创建用户"#: src/components/users/Accounts.jsx:289msgid "User name"msgstr "用户名"#: src/components/users/Accounts.jsx:182msgid """User name may only contain: letters from a-z, digits 0-9, dash $0, period ""$1, underscore $2"msgstr "用户名只能包含：a-z 字母、0-9 数字、破折号 $0、句点 $1、下划线 $2"#: src/components/users/Accounts.jsx:179msgid "User name must not be a reserved word"msgstr "用户名不能是保留字"#: src/components/users/Accounts.jsx:176msgid "User names must be shorter than 33 characters"msgstr "用户名必须少于 33 个字符"#: src/components/Error.jsx:658msgid "Validating..."msgstr "验证中..."#: src/components/Password.jsx:45msgid "Weak"msgstr "弱"#: src/components/localization/index.js:21msgid "Welcome"msgstr "欢迎"#: src/components/localization/index.js:22msgid "Welcome to Fedora Linux"msgstr "欢迎使用 Fedora Linux"#: src/components/AnacondaPage.jsx:88msgid "Welcome. Let's install $0 now."msgstr "欢迎。现在就来安装 $0 吧。"#: src/components/Error.jsx:402msgid """When you submit this bug report, the following log files will be uploaded ""automatically: $0"msgstr "当您提交该缺陷报告时，如下日志文件将被自动上传：$0"#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:563msgid "Windows partitions with BitLocker encryption cannot be resized"msgstr "使用 BitLocker 加密的 Windows 分区无法调整大小"#: src/components/storage/cockpit-storage-integration/CockpitStorageIntegrationSidebar.jsx:83msgid """You can either free up enough space here and let the installer handle the ""rest or manually set up partitions."msgstr "您可以在此处释放足够的空间并让安装程序处理其余部分，或者手动设置分区。"#: src/components/Error.jsx:232msgid "You can generate the API key for your Bugzilla account $0."msgstr "您可以为您的 Bugzilla 账户 $0 生成 API 密钥。"#: src/components/users/Accounts.jsx:527msgid """You have to enable the root account or create a local user account to ""proceed."msgstr "你必须启用root账户或创建本地用户账户以继续。"#: src/components/datetime/DateAndTime.jsx:142msgid "You must be connected to a network to enable automatic date and time."msgstr "你必须连接到网络才能启用自动设置日期与时间。"#: src/components/AnacondaWizardFooter.jsx:108msgid "Your progress will not be saved."msgstr "您的进度将不会被保存。"#: src/components/installation/InstallationProgress.jsx:278msgid "completed step"msgstr "已完成操作"#: src/components/installation/InstallationProgress.jsx:283msgid "current step"msgstr "当前操作"#: src/components/storage/StorageReview.jsx:168#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:383#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:397msgid "delete"msgstr "删除"#: src/components/review/Hostname.jsx:77msgid "edit"msgstr "编辑"#: src/components/storage/StorageReview.jsx:135msgid "encrypt"msgstr "加密"#: src/components/storage/StorageReview.jsx:135msgid "encrypted"msgstr "已加密"#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:237msgid "extended partition"msgstr "扩展分区"#: src/components/storage/StorageReview.jsx:104msgid "format as $0"msgstr "格式化为 $0"#: src/components/Error.jsx:162 src/components/Error.jsx:235msgid "here"msgstr "这里"#: src/components/review/ReviewConfiguration.jsx:57msgid "incomplete"msgstr "未完成"#: src/components/storage/StorageReview.jsx:108msgid "mount"msgstr "挂载"#: src/components/installation/InstallationProgress.jsx:272msgid "pending step"msgstr "待执行操作"#: src/components/Error.jsx:413msgid "report the issue manually"msgstr "手动报告问题"#: src/components/storage/StorageReview.jsx:173msgid "resized from $0"msgstr "从 $0 调整为"#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:478#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:486msgid "shrink"msgstr "缩小"#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:419msgid "shrink to $0"msgstr "缩小至 $0"#: src/components/review/Hostname.jsx:154msgid "transient, will use DHCP"msgstr ""#: src/components/storage/installation-method/ReclaimSpaceModal.jsx:375msgid "undo"msgstr "撤消"#~ msgid "Storage editor is available only in the `Installation method` step."#~ msgstr "存储编辑器仅在“安装方法”步骤中可用。"#~ msgid "Reboot to installed system"#~ msgstr "重新启动到已安装的系统"#~ msgid "Note"#~ msgstr "备注"#~ msgid ""#~ "I understand that all existing data will be erased from the selected disks"#~ msgstr "我了解所选磁盘上的所有现有数据都将被删除"#~ msgid "The following users will be created:"#~ msgstr "将创建以下用户："#~ msgid ""#~ "After creating the issue, click 'Add attachment' and attach file $0 and "#~ "$1."#~ msgstr "创建问题后，点击 “添加附件” 并且附加文件 $0 与 $1 。"#~ msgid "After creating the issue, click 'Add attachment' and attach file $0."#~ msgstr "创建问题后，点击 “添加附件” 并且附加文件 $0 。"#~ msgid "Click \"$0\" to open Bugzilla in a new window."#~ msgstr "点击 “$0” 以在新窗口中打开Bugzilla。"#~ msgid "Help us fix the issue!"#~ msgstr "帮助我们修复这个问题！"#~ msgid "Log in to Bugzilla, or create a new account."#~ msgstr "登入Bugzilla，或创建一个新账户。"#~ msgid "More than one layout detected. Remove additional layouts to proceed"#~ msgstr "检测到多个布局。请移除其他布局以继续"#~ msgid "$0 layouts detected"#~ msgstr "检测到 $0 个布局"#~ msgid "Unusable layout"#~ msgstr "布局不可用"#, fuzzy#~| msgid "More than one layout detected. Remove additional layouts to proceed"#~ msgid "No keyboard layout detected. Add at least one layout to proceed"#~ msgstr "检测到多个布局。请移除其他布局以继续"#~ msgid "This account will have administration privilege with sudo."#~ msgstr "该账户将拥有 sudo 的管理权限。"#~ msgid "Clear search input"#~ msgstr "清除搜索输入"#~ msgid "Critical error"#~ msgstr "关键错误"#~ msgid "Log"#~ msgstr "日志"#~ msgid "Preparing report"#~ msgstr "准备报告"#~ msgid ""#~ "Reporting an issue will send information over the network. Please review "#~ "and edit the attached log to remove any sensitive information."#~ msgstr ""#~ "报告问题将通过网络发送信息。 请查看并编辑随附的日志以删除任何敏感信息。"#~ msgid ""#~ "The following log will be sent to the issue tracking system where you may "#~ "provide additional details."#~ msgstr "以下日志将发送到问题跟踪系统，您可以在其中提供其他详细信息。"#~ msgid "Anaconda installer"#~ msgstr "Anaconda 安装程序"#~ msgid ""#~ "Anaconda is the OS installer used by Fedora, RHEL, CentOS and other Linux "#~ "distributions."#~ msgstr ""#~ "Anaconda 是 Fedora、RHEL、CentOS 和其他 Linux 发行版使用的操作系统安装程"#~ "序。"#~ msgid "Unknown layout"#~ msgstr "未知布局"#~ msgid "Choose a language"#~ msgstr "选择语言"#~ msgid "The installation needs $1 of disk space; "#~ msgstr "安装需要 $1 磁盘空间； "#, fuzzy#~| msgid ""#~| "Blivet-gui is an advanced storage editor that lets you resize, delete, "#~| "and create partitions. It can set up LVM and much more."#~ msgid "The storage editor lets you resize, delete, and create partitions. "#~ msgstr ""#~ "Blivet-gui 是一个高级存储编辑器，可让您调整大小、删除和创建分区。 它可以设"#~ "置 LVM 等等。"#~ msgid "Welcome to $0"#~ msgstr "欢迎使用 $0"#~ msgid "Chosen language: "#~ msgstr "所选语言: "#~ msgid "Common languages"#~ msgstr "通用语言"#~ msgid "Find a language"#~ msgstr "查找语言"#~ msgid ""#~ "The chosen language will be used for installation and in the installed "#~ "software. "#~ msgstr "所选语言将用于安装进程和已安装的软件。 "#~ msgid "Devices should be unlocked before assigning mount points."#~ msgstr "在分配挂载点之前应解锁设备。"#~ msgid "Encrypted devices are locked"#~ msgstr "加密设备已锁定"#~ msgid "Skip"#~ msgstr "跳过"#~ msgid "Unlock devices"#~ msgstr "解锁设备"#~ msgid "Disk configuration"#~ msgstr "磁盘配置"#~ msgid "Disk encryption"#~ msgstr "磁盘加密"#~ msgid "Encrypt the selected devices?"#~ msgstr "加密所选设备？"#~ msgid ""#~ "Encryption helps secure your data, to prevent others from accessing it."#~ msgstr "加密有助于保护您的数据，防止其他人访问它。"#~ msgid ""#~ "Only new partitions will be encrypted. Existing partitions will remain "#~ "untouched."#~ msgstr "仅新分区才会被加密。 现有分区将保持原样。"#~ msgid "No usable devices on the selected disks."#~ msgstr "所选磁盘上没有可用的设备。"#~ msgid "Manually select storage locations for installation."#~ msgstr "手动选择安装的存储位置。"#~ msgid "Modify storage"#~ msgstr "修改存储"#~ msgid "Use free space for the installation"#~ msgstr "使用可用空间进行安装"#~ msgid "Current selections"#~ msgstr "当前选择"#~ msgid "Installing to $0 ($1)"#~ msgstr "安装到 $0 ($1)"#~ msgid "No additional disks detected"#~ msgstr "没有检测到额外的磁盘"#~ msgid "No usable disks detected"#~ msgstr "未检测到可用磁盘"#~ msgid "Re-scan"#~ msgstr "重新扫描"#~ msgid "Rescan"#~ msgstr "重新扫描"#~ msgid "Select a disk"#~ msgstr "选择磁盘"#, fuzzy#~| msgid "No usable disks detected"#~ msgid "The usable disks have changed"#~ msgstr "未检测到可用磁盘"#~ msgid "Some devices use the same name: $0."#~ msgstr "有些设备使用相同的名称：$0。"#~ msgid "To use this option, rename devices to have unique names."#~ msgstr "要使用此选项，请将设备重命名为具有唯一的名称。"#~ msgid "Erase data and install?"#~ msgstr "确认删除磁盘数据并安装吗？"#~ msgid "Erasing the data cannot be undone. Be sure to have backups."#~ msgstr "擦除数据是不能撤销的。请务必有备份。"#~ msgid "Install on the custom mount points?"#~ msgstr "安装在自定义的挂载点上？"#, fuzzy#~| msgid "Install on the free space?"#~ msgid "Install using the configured storage?"#~ msgstr "安装在可用空间上？"#~ msgid ""#~ "The installation will use the available space on your devices and will "#~ "not erase any device data."#~ msgstr "安装将使用您设备上的可用空间，并且不会删除任何设备数据。"#~ msgid "The installation will use your configured partitioning layout."#~ msgstr "安装将使用您配置的分区布局。"#~ msgid ""#~ "The selected disks will be erased, this cannot be undone. Are you sure "#~ "you want to continue with the installation?"#~ msgstr "所选磁盘的内容将被清除，且无法取消。您确定要继续进行安装吗？"#~ msgid "To prevent loss, make sure to backup your data."#~ msgstr "为防止丢失，请备份你的数据。"#, fuzzy#~| msgid "Changes made in Blivet-gui will directly affect your storage."#~ msgid "Any changes you make will immediately affect your storage."#~ msgstr "Blivet-gui 中所做的更改将直接影响您的存储。"#~ msgid "Disabled"#~ msgstr "禁用"#~ msgid "Enabled"#~ msgstr "已启用"#~ msgid "Error was hit when going back from $0."#~ msgstr "从 $0 返回时出错。"#, fuzzy#~| msgid "Connection failed"#~ msgid "Account setting failed."#~ msgstr "连接失败"#, fuzzy#~| msgid ""#~| "You need to configure the network to use a network installation source."#~ msgid "Current configuration can be used for installation."#~ msgstr "您需配置网络才能使用网络安装源。"#~ msgid "The root partition is always re-formatted by the installer."#~ msgstr "根分区始终由安装程序重新格式化。"#~ msgid ""#~ "If you have made changes on partitions or disks, please rescan storage."#~ msgstr "如果您对分区或磁盘进行了更改，请重新扫描存储。"#~ msgid "Ignore"#~ msgstr "忽略"#~ msgid "Modified storage"#~ msgstr "已修改的存储"#~ msgid "Modifying the storage failed."#~ msgstr "修改存储失败。"#~ msgid "Rescan storage"#~ msgstr "重新扫描存储"#~ msgid "Failed to get device names."#~ msgstr "获取设备名称失败。"#~ msgid ""#~ "\n"#~ "\n"#~ "Unknown Error. Aborting. \n"#~ "\n"#~ msgstr ""#~ "\n"#~ "\n"#~ "未知错误。正在终止。 \n"#~ "\n"#~ msgid ""#~ "\n"#~ "\n"#~ "WARNING!!! VNC server running with NO PASSWORD!\n"#~ "You can use the inst.vncpassword=PASSWORD boot option\n"#~ "if you would like to secure the server.\n"#~ "\n"#~ msgstr ""#~ "\n"#~ "\n"#~ "警告!!! VNC 服务器以无密码方式运行!\n"#~ "如果您想提高服务器的安全性，可使用\n"#~ "inst.vncpassword=PASSWORD 引导选项。\n"#~ "\n"#~ msgid ""#~ "\n"#~ "\n"#~ "You chose to connect to a listening vncviewer. \n"#~ "This does not require a password to be set. If you \n"#~ "set a password, it will be used in case the connection \n"#~ "to the vncviewer is unsuccessful\n"#~ "\n"#~ msgstr ""#~ "\n"#~ "\n"#~ "您选择连接到进行侦听的 vncviewer。\n"#~ "这不需要设置密码。如果您\n"#~ "设置了密码，将在连接到\n"#~ " vncviewer 失败时使用。\n"#~ "\n"#~ msgid ""#~ "\n"#~ "\n"#~ "You chose to execute vnc with a password. \n"#~ "\n"#~ msgstr ""#~ "\n"#~ "\n"#~ "您选择运行 VNC 时使用密码。 \n"#~ "\n"#, python-format#~ msgid ""#~ "\n"#~ "An error occurred during reading the kickstart file:\n"#~ "%s\n"#~ "\n"#~ "The installer will now terminate."#~ msgstr ""#~ "\n"#~ "读取 kickstart 文件时发生了下列错误：\n"#~ "%s\n"#~ "\n"#~ "安装程序将终止。"#~ msgid ""#~ "\n"#~ "Press [Enter] to reboot your system.\n"#~ msgstr ""#~ "\n"#~ "按 [回车] 键重启系统。\n"#, python-format#~ msgid ""#~ "\n"#~ "Running in cmdline mode, no interactive debugging allowed.\n"#~ "The exact error message is: \n"#~ "\n"#~ "%s.\n"#~ "\n"#~ "The installer will now terminate."#~ msgstr ""#~ "\n"#~ "当前运行于命令行模式，不能进行交互式调试。\n"#~ "具体错误信息为：\n"#~ "\n"#~ "%s。\n"#~ "\n"#~ "安装程序将终止。"#~ msgid ""#~ "\n"#~ "Some warnings occurred during reading the kickstart file:"#~ msgstr ""#~ "\n"#~ "读取 kickstart 文件时出现警告："#, python-format#~ msgid ""#~ "\n"#~ "The installation was stopped due to an error which occurred while running "#~ "in non-interactive cmdline mode. Since there cannot be any questions in "#~ "cmdline mode, edit your kickstart file and retry installation. \n"#~ "The exact error message is: \n"#~ "\n"#~ "%s. \n"#~ "\n"#~ "The installer will now terminate."#~ msgstr ""#~ "\n"#~ "在运行非交互命令行模式的过程中出现错误造成安装停止。由于在命令行模式中不能"#~ "出现任何问题，所以请编辑 kickstart 文件并重新进行安装。\n"#~ "具体出错信息为： \n"#~ "\n"#~ "%s。\n"#~ "\n"#~ "安装程序已中止。"#~ msgid ""#~ "\n"#~ "Would you like to use it anyway?"#~ msgstr ""#~ "\n"#~ "您确定要使用吗？"#, python-format#~ msgid ""#~ " You don't have enough space available to install <b>%(product)s</b>, "#~ "even if you used all of the free space available on the selected disks."#~ msgstr ""#~ " 即使使用所选盘上的全部空闲空间，也不够用来安装 <b>%(product)s</b>。"#~ msgid " <a href=\"\">Click for details.</a>"#~ msgstr " <a href=\"\">点击查看详情。</a>"#, python-format#~ msgid " DNS: %s\n"#~ msgstr " DNS：%s\n"#, python-format#~ msgid " IPv4 Address: %(addr)s Netmask: %(netmask)s Gateway: %(gateway)s\n"#~ msgstr " IPv4 地址：%(addr)s 子网掩码：%(netmask)s 网关：%(gateway)s\n"#, python-format#~ msgid " IPv6 Address: %(addr)s/%(prefix)d\n"#~ msgstr " IPv6 地址：%(addr)s/%(prefix)d\n"#~ msgid " Starting text mode."#~ msgstr " 正在启动文本模式。"#~ msgid ""#~ " Try the text mode installer by running:\n"#~ "\n"#~ "'/usr/bin/liveinst -T'\n"#~ "\n"#~ " from a root terminal."#~ msgstr ""#~ " 在 root 终端下运行：\n"#~ "\n"#~ "'/usr/bin/liveinst -T'\n"#~ "\n"#~ " 尝试文本模式安装。"#~ msgctxt "GUI|Custom Partitioning|Devices"#~ msgid " and {} other"#~ msgid_plural " and {} others"#~ msgstr[0] " 及 {} 个其他"#, python-format#~ msgid ""#~ "%(bootloader_stage2_description)s cannot be on an iSCSI disk which is not "#~ "configured in iBFT."#~ msgstr ""#~ "%(bootloader_stage2_description)s 不能在一个没有在 iBFT 中配置的 iSCSI 磁"#~ "盘中。"#, python-format#~ msgid "%(desc)s cannot be of type %(type)s"#~ msgstr "%(desc)s 的类型不能为 %(type)s"#, python-format#~ msgid "%(desc)s cannot be of type %(type)s."#~ msgstr "%(desc)s 的类型不能为 %(type)s。"#, python-format#~ msgid "%(desc)s must be between %(min)d and %(max)d MB in size"#~ msgstr "%(desc)s 大小必须在 %(min)d 到 %(max)d MB 之间"#, python-format#~ msgid "%(desc)s must be mounted on one of %(mountpoints)s."#~ msgstr "%(desc)s 必须挂载到 %(mountpoints)s 其中之一。"#, python-format#~ msgid "%(desc)s must be within the first %(max_end)s of the disk."#~ msgstr "%(desc)s 必须位于磁盘的前 %(max_end)s 以内。"#, python-format#~ msgid "%(desc)s must not be larger than %(max)dMB."#~ msgstr "%(desc)s 不得超过 %(max)dMB。"#, python-format#~ msgid "%(desc)s must not be smaller than %(min)dMB."#~ msgstr "%(desc)s 不得小于 %(min)d MB。"#, python-format#~ msgid ""#~ "%(deviceName)s may not have enough space for grub2 to embed core.img when "#~ "using the %(fsType)s file system on %(deviceType)s"#~ msgstr ""#~ "当使用 %(deviceType)s 上的 %(fsType)s 文件系统时，%(deviceName)s 可能没有"#~ "足够的空间让 grub2 嵌入 core.img"#, python-format#~ msgid "%(freeSize)s of %(devSize)s"#~ msgstr "%(devSize)s 中的 %(freeSize)s"#, python-format#~ msgid "%(items_selected)s of %(items_total)s mount points in %(page_name)s"#~ msgstr ""#~ "已选择 %(items_selected)s 个，共 %(items_total)s 个挂载点在 %(page_name)s"#, python-format#~ msgid "%(name)s must have one of the following disklabel types: %(types)s."#~ msgstr "%(name)s 必须拥有以下磁盘标签类型之一：%(types)s。"#, python-format#~ msgid "%(productName)s %(productVersion)s INSTALLATION"#~ msgstr "%(productName)s %(productVersion)s 安装"#, python-format#~ msgid "%(productName)s %(productVersion)s installation"#~ msgstr "%(productName)s %(productVersion)s 安装"#, python-format#~ msgid "%(productName)s %(productVersion)s installation on host %(name)s"#~ msgstr "在主机 %(name)s 上安装 %(productName)s %(productVersion)s"#, python-format#~ msgid ""#~ "%(product_name)s requires %(needed_ram)s MB of memory to install, but you "#~ "only have %(total_ram)s MB on this machine.\n"#~ msgstr ""#~ "%(product_name)s 需要 %(needed_ram)s MB 内存方可安装，但本机只有 "#~ "%(total_ram)s MB。\n"#, python-format#~ msgid "%d Mb/s"#~ msgstr "%d Mb/s"#, python-format#~ msgctxt "GUI|Custom Partitioning"#~ msgid "%d _storage device selected"#~ msgid_plural "%d _storage devices selected"#~ msgstr[0] "已选择 %d 个存储设备(_S)"#, python-format#~ msgid ""#~ "%s The disks you've selected have the following amounts of free space:"#~ msgstr "%s 您选择的磁盘有如下数量的空闲空间："#, python-format#~ msgid ""#~ "%s is currently mounted and cannot be used for the installation. Please "#~ "unmount it and retry."#~ msgstr "当前挂载了 %s，它不能用于安装。请卸载并重试。"#, python-format#~ msgid "%s is missing. Cannot setup firewall."#~ msgstr "%s 缺失。无法设置防火墙。"#, python-format#~ msgid ""#~ "%s is now successfully installed and ready for you to use!\n"#~ "Go ahead and quit the application to start using it!"#~ msgstr ""#~ "%s 已成功安装并可以使用！\n"#~ "退出该程序然后使用吧！"#, python-format#~ msgid ""#~ "%s is now successfully installed and ready for you to use!\n"#~ "Go ahead and reboot your system to start using it!"#~ msgstr ""#~ "%s 已成功安装并可以使用！\n"#~ "重启系统然后使用吧！"#, python-format#~ msgid "%s must be on a primary partition."#~ msgstr "%s 必须在主分区上。"#, python-format#~ msgid "%s timezone"#~ msgstr "%s 时区"#, python-format#~ msgid "%s to switch layouts."#~ msgstr "%s 用来切换布局。"#~ msgid "({} free)"#~ msgstr "({} 可用)"#~ msgid "/boot cannot be of type \"lvmlv\" on s390x"#~ msgstr "在 s390x 上，/boot 的类型不能是 \"lvmlv\""#, python-brace-format#~ msgid "/boot/efi must be on a device of type {type} or {another}"#~ msgstr "/boot/efi 必须位于 {type} 或 {another} 类型的设备上"#~ msgid "0 GB"#~ msgstr "0 GB"#~ msgid "0 MB"#~ msgstr "0 MB"#~ msgid "1 subscription attached to the system"#~ msgstr "一项订阅附加到系统"#~ msgctxt "GUI|Date and Time"#~ msgid "24-_hour"#~ msgstr "24 小时制(_H)"#~ msgctxt "GUI|Date and Time"#~ msgid ":"#~ msgstr ":"#, python-format#~ msgid "<b>%(count)s disk; %(size)s reclaimable space</b> (in file systems)"#~ msgid_plural ""#~ "<b>%(count)s disks; %(size)s reclaimable space</b> (in file systems)"#~ msgstr[0] "(文件系统中) <b>%(count)s 磁盘；有 %(size)s 可回收空间</b>"#~ msgid ""#~ "<b>Pool</b > - If checked, indicates the Host Name refers to a pool of "#~ "servers.\n"#~ "\n"#~ "<b>NTS</b> - If checked, indicates support for Network Time Security "#~ "authentication."#~ msgstr ""#~ "<b>Pool</b > - 如果选中，则表示主机名指的是一个服务器池。\n"#~ "\n"#~ "<b>NTS</b> - 如果选中，表示支持网络时间安全（NTS）验证。"#~ msgid ""#~ "<b>Warning:</b> All storage changes made using the installer will be lost "#~ "when you press 'Rescan Disks'."#~ msgstr ""#~ "<b>警告：</b> 当您按“重新扫描硬盘”后，所有使用安装程序所做的存储上的修改将"#~ "会丢失。"#~ msgid ""#~ "<b>Warning</b>: All storage changes made using the installer will be lost "#~ "when you choose to format."#~ msgstr "<b>警告</b>：选择格式化后所有使用安装程序做出的存储变更都将会丢失。"#, python-format#~ msgid ""#~ "<b>You don't have enough space available to install %(productName)s</b>, "#~ "even if you used all of the free space available on the selected disks. "#~ "You could add more disks for additional space, modify your software "#~ "selection to install a smaller version of <b>%(productName)s</b>, or quit "#~ "the installer."#~ msgstr ""#~ "即使使用所选盘中的全部可用空间，<b>您也没有足够的可用空间安装 "#~ "%(productName)s</b>。您可以添加更多磁盘获得更多可用空间，或者也可以修改软"#~ "件选择，让 <b>%(productName)s</b> 的安装变得小一些，或者退出安装程序。"#, python-format#~ msgid ""#~ "<b>You don't have enough space available to install %s</b>. You can "#~ "shrink or remove existing partitions via our guided reclaim space tool, "#~ "or you can adjust your partitions on your own in the custom partitioning "#~ "interface."#~ msgstr ""#~ "<b>您没有足够的可用空间安装 %s</b>，您可以在回收空间工具的指引下压缩或删除"#~ "现有分区。或者您可以在自定义分区界面中自行调整分区。"#~ msgid ""#~ "<span size=\"small\"><b>Example:</b> iqn.2012-09.com.example:diskarrays-"#~ "sn-a8675309</span>"#~ msgstr ""#~ "<span size=\"small\"><b>例如：</b> iqn.2012-09.com.example:diskarrays-sn-"#~ "a8675309</span>"#~ msgid "<span size=\"small\"><b>Example:</b> squid.mysite.org:3128</span>"#~ msgstr "<span size=\"small\"><b>示例：</b> squid.mysite.org:3128</span>"#~ msgid ""#~ "A swap partition has not been specified. To significantly improve "#~ "performance for most installations, it is recommended to specify a swap "#~ "partition."#~ msgstr ""#~ "还未指定 swap 分区。对大多数安装的系统而言，为了显著提升性能，建议指定 "#~ "swap 分区。"#~ msgid "ADD A KEYBOARD LAYOUT"#~ msgstr "添加键盘布局"#~ msgid "ADD A NEW MOUNT POINT"#~ msgstr "添加新挂载点"#~ msgid "ADD DASD STORAGE TARGET"#~ msgstr "添加 DASD 存储对象"#~ msgid "ADD iSCSI STORAGE TARGET"#~ msgstr "添加 iSCSI 存储对象"#~ msgid "ADD zFCP STORAGE TARGET"#~ msgstr "添加 zFCP 存储目标"#~ msgid "ADVANCED USER CONFIGURATION"#~ msgstr "高级用户配置"#~ msgid "AM"#~ msgstr "AM"#~ msgid "AM/PM Down"#~ msgstr "AM/PM 下调"#~ msgid "AM/PM Up"#~ msgstr "AM/PM 上调"#~ msgid "AVAILABLE SPACE"#~ msgstr "可用空间"#~ msgctxt "GUI|Software Source"#~ msgid "A_dd"#~ msgstr "添加(_D)"#~ msgctxt "GUI|Storage"#~ msgid "A_utomatic"#~ msgstr "自动(_U)"#~ msgid "Activation Key"#~ msgstr "激活密钥"#~ msgctxt "GUI|Subscription|Authetication|Activation Key"#~ msgid "Activation _Key"#~ msgstr "激活码 (_K)"#~ msgid "Activation key set."#~ msgstr "激活密钥集。"#~ msgid "Add"#~ msgstr "添加"#~ msgctxt "GUI|Custom Partitioning"#~ msgid "Add"#~ msgstr "添加"#~ msgctxt "GUI|Installation Destination|Filter"#~ msgid "Add EC_KD DASD..."#~ msgstr "添加 ECKD DASD(_K)..."#~ msgctxt "GUI|Installation Destination|Filter"#~ msgid "Add FCo_E SAN..."#~ msgstr "添加 FCoE SAN (_E)..."#~ msgid "Add Layout"#~ msgstr "增加布局"#~ msgid "Add NTP server address"#~ msgstr "添加 NTP 服务器地址"#~ msgid "Add Specialized Disk"#~ msgstr "添加专用磁盘"#~ msgctxt "GUI|Installation Destination|Filter"#~ msgid "Add _iSCSI Target..."#~ msgstr "添加 iSCSI 对象 (_I)..."#~ msgid "Add a new mount point."#~ msgstr "添加新挂载点。"#~ msgid "Add a new repository."#~ msgstr "添加新软件仓库。"#~ msgctxt "GUI|User"#~ msgid ""#~ "Add ad_ministrative privileges to this user account (wheel group "#~ "membership)"#~ msgstr "为此用户帐户 (wheel 组成员) 添加管理权限(_M)"#~ msgid "Add device"#~ msgstr "添加设备"#~ msgid "Additional repositories"#~ msgstr "额外软件仓库"#~ msgid "Additional software for Selected Environment"#~ msgstr "已选环境的附加软件"#~ msgid "Administrator"#~ msgstr "管理员"#, python-format#~ msgid "Administrator %s will be created"#~ msgstr "将创建管理员用户 %s"#~ msgctxt "GUI|Storage"#~ msgid "Advanced Custom (_Blivet-GUI)"#~ msgstr "高级自定义 (_Blivet-GUI) (_B)"#~ msgctxt "GUI|Network"#~ msgid "Airplane Mode"#~ msgstr "飞行模式"#~ msgid "Allow root SSH login with password"#~ msgstr "允许 root 用户使用密码进行 SSH 登录"#~ msgctxt "GUI|User"#~ msgid "Allow this user to run the 'sudo' command."#~ msgstr "允许此用户运行“sudo”命令。"#~ msgid "Alt + Shift to switch layouts."#~ msgstr "按 Alt + Shift 切换键盘布局。"#~ msgid ""#~ "An error occurred during Red Hat Insights configuration. Would you like "#~ "to ignore this and continue with installation?"#~ msgstr ""#~ "配置 Red Hat Insights 的过程中发生错误。您要忽略该错误并继续安装吗？"#~ msgid ""#~ "An error occurred during registration attempt triggered by the rhsm "#~ "kickstart command. This could have happened due to incorrect rhsm command "#~ "arguments or subscription infrastructure issues. Would you like to ignore "#~ "this and continue with installation?"#~ msgstr ""#~ "在 rhsm kickstart 命令触发注册尝试期间发生错误。 这可能是由于不正确的 "#~ "rhsm 命令参数或订阅基础结构问题而发生的。 是否要忽略这一点并继续安装？"#, python-brace-format#~ msgid ""#~ "An error occurred trying to mount some or all of your system: {message}\n"#~ "\n"#~ "Some of it may be mounted under {path}."#~ msgstr ""#~ "尝试挂载系统中的某些或全部文件系统时出错：{message}\n"#~ "\n"#~ "某些文件系统可能已经被挂载到 {path}。"#~ msgid "An error occurred while activating your storage configuration."#~ msgstr "激活您的存储配置时出现错误。"#~ msgid "An error occurred while resizing the device {}: {}"#~ msgstr "重新调整设备 {} 的大小时发生错误：{}"#~ msgid "An unknown error occurred during installation. Details are below."#~ msgstr "安装过程中发生未知错误。 详情如下。"#, python-format#~ msgid ""#~ "Anaconda is unable to create %s because the file already exists. Anaconda "#~ "is already running, or a previous instance of anaconda has crashed."#~ msgstr ""#~ "由于该文件已经存在，因此 Anaconda 无法创建 %s。Anaconda 已经在运行，或者之"#~ "前运行的 anaconda 进程已崩溃。"#~ msgid "Apple Bootstrap Partition"#~ msgstr "Apple Bootstrap 分区"#~ msgid "Apple EFI Boot Partition"#~ msgstr "Apple EFI 引导分区"#~ msgid ""#~ "Are you sure you want to delete all of the data on {}, including "#~ "snapshots?"#~ msgstr "您确定要删除 {} 中（包括快照等）的所有数据吗？"#~ msgid ""#~ "Are you sure you want to delete all of the data on {}, including "#~ "subvolumes?"#~ msgstr "您确定要删除 {} 中（包括子卷等）的所有数据吗？"#~ msgid "Are you sure you want to delete all of the data on {}?"#~ msgstr "您确定要删除 {} 中的所有数据吗？"#~ msgid ""#~ "Are you sure you wish to quit the\n"#~ "installation process?"#~ msgstr ""#~ "您确定要退出\n"#~ "安装程序吗？"#~ msgid "As large as possible"#~ msgstr "尽可能的大"#~ msgid "Assign mount points"#~ msgstr "分配挂载点"#~ msgid ""#~ "At least one of your swap devices does not have a UUID, which is common "#~ "in swap space created using older versions of mkswap. These devices will "#~ "be referred to by device path in /etc/fstab, which is not ideal since "#~ "device paths can change under a variety of circumstances. "#~ msgstr ""#~ "您的 swap 设备中至少有一个没有 UUID，此问题常见于使用较早版本的 mkswap 创"#~ "建的 swap 空间。这些设备将会通过它们在 /etc/fstab 中的设备路径而被引用。由"#~ "于设备路径可能会在不同环境下发生变化，因此这不是个很理想的做法。 "#~ msgid "Attaching subscription..."#~ msgstr "正在附加订阅……"#, python-format#~ msgid "Attempting to connect to vnc client on host %s..."#~ msgstr "尝试在主机 %s 上连接 vnc 客户端..."#~ msgid "Attempting to start vncconfig"#~ msgstr "尝试启动 vncconfig"#~ msgid "Authentication"#~ msgstr "认证"#~ msgid "Authentication required"#~ msgstr "需要认证"#~ msgid "Authentication required by wireless network"#~ msgstr "无线网络需要认证"#~ msgctxt "GUI|Software Source"#~ msgid "Auto-detected installation _source"#~ msgstr "自动检测到的安装源(_S)"#~ msgid "Auto-detected source"#~ msgstr "自动检测源"#~ msgid "Automatic"#~ msgstr "自动"#~ msgid "Automatic partitioning selected"#~ msgstr "已选择自动分区"#~ msgid "Available locales"#~ msgstr "可用区域选项"#~ msgid "Available regions"#~ msgstr "可选地区"#, python-format#~ msgid "Available timezones in region %s"#~ msgstr "%s 地区中的可选时区"#~ msgid "BAR"#~ msgstr "BAR"#~ msgid "BAZ"#~ msgstr "BAZ"#~ msgid "BLIVET GUI PARTITIONING"#~ msgstr "BLIVET GUI分区中"#~ msgid "Bad format of the IP address"#~ msgstr "IP 地址格式错误"#~ msgid "Bad format of the netmask"#~ msgstr "网络掩码格式错误"#~ msgid "Beta Warn"#~ msgstr "Beta 版警告"#~ msgid "Bond"#~ msgstr "Bond"#, python-format#~ msgid "Bond %(interface_name)s (%(list_of_ports)s) connected"#~ msgstr "Bond %(interface_name)s (%(list_of_ports)s) 已连接"#~ msgid "Boot"#~ msgstr "可引导"#~ msgid ""#~ "Boot loader stage1 device cannot be on an iSCSI disk which is not "#~ "configured in iBFT."#~ msgstr "引导加载程序阶段1设备不能在一个没有在 iBFT 中配置的 iSCSI 磁盘上。"#~ msgid "Bridge"#~ msgstr "桥接"#, python-format#~ msgid "Bridge %(interface_name)s (%(list_of_ports)s) connected"#~ msgstr "网桥 %(interface_name)s (%(list_of_ports)s) 已连接"#~ msgid "Btrfs"#~ msgstr "Btrfs"#~ msgid "Btrfs file system is not supported."#~ msgstr "不支持 Btrfs 文件系统。"#~ msgid ""#~ "Btrfs partition \"{}\" has a format of \"{}\", but should have a format "#~ "of \"btrfs\"."#~ msgstr "Btrfs 分区“{}”的格式为“{}”，但应该是“btrfs”格式。"#~ msgid "Btrfs partition \"{}\" is defined multiple times."#~ msgstr "Btrfs 分区 “{}” 被定义多次。"#~ msgid "Btrfs volume \"{}\" specified with --useexisting does not exist."#~ msgstr "--useexiting 选项指定的 Btrfs 卷“{}”不存在。"#~ msgid ""#~ "Btrfs volume defined without any member devices. Either specify member "#~ "devices or use --useexisting."#~ msgstr ""#~ "Btrfs 卷的定义中没有任何成员设备。请指定成员设备，或者用 --useexisting 选"#~ "项。"#~ msgid "CCW"#~ msgstr "CCW"#~ msgid "CD/DVD"#~ msgstr "CD/DVD"#~ msgctxt "GUI|Advanced Storage|iSCSI|Configure|CHAP"#~ msgid "CHAP _Password:"#~ msgstr "CHAP 密码(_P)："#~ msgctxt "GUI|Advanced Storage|iSCSI|Configure|Reverse CHAP"#~ msgid "CHAP _Password:"#~ msgstr "CHAP 密码(_P)："#~ msgctxt "GUI|Advanced Storage|iSCSI|Login|CHAP"#~ msgid "CHAP _Password:"#~ msgstr "CHAP 密码(_P)："#~ msgctxt "GUI|Advanced Storage|iSCSI|Login|Reverse CHAP"#~ msgid "CHAP _Password:"#~ msgstr "CHAP 密码(_P)："#~ msgctxt "GUI|Advanced Storage|iSCSI|Configure|CHAP"#~ msgid "CHAP _User name:"#~ msgstr "CHAP 用户名(_U)："#~ msgctxt "GUI|Advanced Storage|iSCSI|Configure|Reverse CHAP"#~ msgid "CHAP _User name:"#~ msgstr "CHAP 用户名(_U)："#~ msgctxt "GUI|Advanced Storage|iSCSI|Login|CHAP"#~ msgid "CHAP _User name:"#~ msgstr "CHAP 用户名(_U)："#~ msgctxt "GUI|Advanced Storage|iSCSI|Login|Reverse CHAP"#~ msgid "CHAP _User name:"#~ msgstr "CHAP 用户名(_U)："#~ msgid "CHAP pair"#~ msgstr "CHAP 对"#~ msgid "CHAP pair and a reverse pair"#~ msgstr "CHAP 对和反转对"#, python-format#~ msgid "CONFIGURE %(container_type)s"#~ msgstr "配置 %(container_type)s"#~ msgid "CONFIGURE CONTAINER"#~ msgstr "配置容器"#~ msgid "CONFIGURE MOUNT POINT"#~ msgstr "配置挂载点"#~ msgid "CONNECT TO RED HAT"#~ msgstr "连接到红帽"#~ msgid "CREATE USER"#~ msgstr "创建用户"#~ msgid "CUSTOMIZATION"#~ msgstr "自定义"#~ msgctxt "GUI|Network|Wireless|Configure"#~ msgid "C_onfigure"#~ msgstr "配置(_C)"#~ msgctxt "GUI|Network|Authentication Dialog"#~ msgid "C_onnect"#~ msgstr "连接(_O)"#~ msgctxt "GUI|Network|Wireless|Select Network Dialog"#~ msgid "C_onnect"#~ msgstr "连接(_O)"#~ msgid "Cable unplugged"#~ msgstr "未插入线缆"#~ msgid "Cache PVs must belong to the same VG as the cached LV"#~ msgstr "缓冲的物理卷必须跟缓冲的逻辑卷属于同一卷组"#~ msgctxt "GUI|Software Source|Media Check Dialog"#~ msgid "Cancel"#~ msgstr "取消"#~ msgid "Cannot install to unpartitionable device \"{}\"."#~ msgstr "不能在无法分区的设备 “{}” 中安装。"#~ msgid "Cannot reformat Btrfs volume '{}' with existing subvolumes"#~ msgstr "无法使用现有子卷重新格式化 Btrfs 卷“{}”"#~ msgid "Cannot set label on file system."#~ msgstr "无法在文件系统上设置标签。"#~ msgid "Capacity"#~ msgstr "容量"#~ msgid "Change timezone"#~ msgstr "变更时区"#~ msgid ""#~ "Changes here will only apply to the installed system. Use the desktop's "#~ "tool to configure the keyboard for the installation process."#~ msgstr ""#~ "这里的更改只会应用到已安装的系统。使用桌面工具可配置安装过程中的键盘布局。"#~ msgid "Checking image checksum"#~ msgstr "正在检查镜像校验和"#~ msgid "Checking software dependencies..."#~ msgstr "检查软件依赖关系..."#~ msgid ""#~ "Choose device from above to assign mount point and set format.\n"#~ "Formats marked with * are new formats meaning ALL DATA on the original "#~ "format WILL BE LOST!"#~ msgstr ""#~ "从上方选择设备来分配挂载点并设定格式。\n"#~ "带有 * 的格式代表新格式，这表示原有格式上的所有数据都将丢失！"#~ msgid "Choose from above to assign mount point and/or set format."#~ msgstr "从上方选择来分配挂载点并/或设定格式。"#~ msgid "City"#~ msgstr "城市"#~ msgid "Closest mirror"#~ msgstr "最近的镜像"#~ msgid "Complete!"#~ msgstr "完成！"#~ msgctxt "GUI|Passphrase Dialog"#~ msgid "Con_firm:"#~ msgstr "确认(_F)："#~ msgid "Configuration not saved: netmask missing in static configuration"#~ msgstr "配置未保存：静态配置中缺少子网掩码"#~ msgid "Configure NTP"#~ msgstr "配置 NTP"#~ msgid "Configure Network Time Servers"#~ msgstr "配置网络时间服务器"#, python-format#~ msgid "Configure device %s"#~ msgstr "配置设备 %s"#, python-format#~ msgid "Configure device: %s"#~ msgstr "配置设备：%s"#~ msgctxt "GUI|Software Source"#~ msgid "Configure proxy"#~ msgstr "配置代理"#~ msgid "Configuring Red Hat subscription"#~ msgstr "配置红帽订阅"#~ msgid "Configuring addons"#~ msgstr "正在配置附加组件"#, python-format#~ msgid "Configuring device %s."#~ msgstr "配置设备 %s。"#~ msgid "Configuring installed system"#~ msgstr "正在配置已安装系统"#~ msgid "Configuring {}"#~ msgstr "正在配置 {}"#~ msgid "Confirm Password"#~ msgstr "确认密码"#~ msgid "Connect automatically after reboot"#~ msgstr "重启后自动连接"#~ msgctxt "GUI|Subscription|Red Hat Insights"#~ msgid "Connect to Red Hat _Insights"#~ msgstr "连接到 Red Hat Insights(_I)"#~ msgid "Connected"#~ msgstr "已连接"#~ msgid "Connected to Red Hat Insights"#~ msgstr "已连接至 Red Hat Insights"#~ msgid "Connected!"#~ msgstr "已连接！"#, python-format#~ msgid "Connected: %(list_of_interface_names)s"#~ msgstr "已连接：%(list_of_interface_names)s"#~ msgid "Connecting"#~ msgstr "连接中"#~ msgid "Connecting..."#~ msgstr "正在连接..."#~ msgid ""#~ "Continuing with this action will reset all your partitioning selections "#~ "to their current on-disk state."#~ msgstr "继续此步骤将会把您的分区方案重设为它们当前的状态。"#~ msgid "Contract"#~ msgstr "合约"#, python-format#~ msgid "Create a new %(container_type)s ..."#~ msgstr "创建新 %(container_type)s ..."#~ msgid "Create a new additional repository or select an existing one."#~ msgstr "创建或选择一个附加软件仓库。"#~ msgid "Create new mount points by clicking the '+' button."#~ msgstr "通过点击“＋”按钮创建新挂载点。"#, python-format#~ msgid "Create or select %(container_type)s"#~ msgstr "创建或选择 %(container_type)s"#~ msgid "Create user"#~ msgstr "创建用户"#~ msgid "Creating snapshots"#~ msgstr "正在创建快照"#~ msgid "Creating users"#~ msgstr "创建用户"#, python-format#~ msgid "Current host name: %s\n"#~ msgstr "当前主机名：%s\n"#, c-format#~ msgid "Current layout: '%s'. Add more layouts to enable switching."#~ msgstr "当前布局：'%s'。添加更多布局以启用切换功能。"#, c-format#~ msgid "Current layout: '%s'. Click to switch to the next layout."#~ msgstr "当前布局：'%s'。点击切换至下一个布局。"#~ msgid "Custom base URL"#~ msgstr "自定义基础 URL"#~ msgid "Custom partitioning selected"#~ msgstr "已选择自定义分区"#~ msgid "Custom server URL"#~ msgstr "自定义服务器 URL"#~ msgid "Custom software selected"#~ msgstr "已选择自定义软件"#~ msgid "DASD"#~ msgstr "DASD"#~ msgid "DATA"#~ msgstr "数据"#~ msgid "DISK ENCRYPTION PASSPHRASE"#~ msgstr "磁盘加密密码"#~ msgid "DISTRIBUTION INSTALLATION"#~ msgstr "发行版安装"#~ msgctxt "GUI|Password"#~ msgid "D_isable root account"#~ msgstr "禁用 root 帐户(_I)"#~ msgid "Default HUB title"#~ msgstr "默认HUB 标题"#~ msgid "Default Route"#~ msgstr "默认路由"#~ msgid "Default spoke title"#~ msgstr "默认分部标题"#~ msgctxt "GUI|Reclaim Dialog"#~ msgid "Delete _all"#~ msgstr "全部删除(_A)"#~ msgctxt "GUI|Custom Partitioning|Confirm Delete Dialog"#~ msgid "Delete _all file systems which are only used by {}."#~ msgstr "删除仅由 {} 使用的所有文件系统(_A)。"#~ msgid "Deployment complete: {}"#~ msgstr "部署完成：{}"#~ msgid "Deployment starting: {}"#~ msgstr "部署正在开始：{}"#~ msgctxt "GUI|Custom Partitioning|Add Dialog"#~ msgid "Desired _Capacity:"#~ msgstr "期望容量(_C)："#~ msgctxt "GUI|Custom Partitioning|Configure|Devices"#~ msgid "Desired _Capacity:"#~ msgstr "期望容量(_C)："#~ msgid "Device \"{}\" given in clearpart device list does not exist."#~ msgstr "clearpart 设备列表中的设备 \"{}\" 不存在。"#~ msgid "Device Selection"#~ msgstr "设备选择"#~ msgctxt "GUI|Custom Partitioning|Configure"#~ msgid "Device _Type:"#~ msgstr "设备类型(_T)："#~ msgid "Device configuration"#~ msgstr "设备配置"#~ msgid "Device discovery failed."#~ msgstr "未找到设备。"#~ msgid "Device discovery succeeded."#~ msgstr "成功找到设备。"#~ msgid "Device does not support RAID level selection {}."#~ msgstr "设备不支持选择的 RAID 级别 {}。"#~ msgid "Device reconfiguration failed."#~ msgstr "重新配置设备失败。"#~ msgid "Device removal request failed."#~ msgstr "设备移除请求失败。"#~ msgctxt "GUI|Software Source"#~ msgid "Device with an _ISO file"#~ msgstr "具有 ISO 文件的设备(_I)"#~ msgid "Device(s):"#~ msgstr "设备："#~ msgid "Device:"#~ msgstr "设备："#, python-format#~ msgid "Device: %s"#~ msgstr "设备：%s"#~ msgid "Devices reconfiguration succeeded."#~ msgstr "重新配置设备成功。"#~ msgid ""#~ "Disabling the root account will lock the account and disable remote "#~ "access with root account. This will prevent unintended administrative "#~ "access to the system."#~ msgstr ""#~ "禁用 root 帐户将锁定帐户并禁用 root 帐户的远程访问权限。这将阻止对系统意外"#~ "的管理访问。"#~ msgid "Disconnected"#~ msgstr "已断开连接"#~ msgid "Disconnecting"#~ msgstr "正在断开连接"#~ msgid "Disconnecting..."#~ msgstr "正在断开连接..."#~ msgid "Discovering DASD devices. This may take a moment..."#~ msgstr "正在查找 DASD 设备。可能要花些时间..."#~ msgid "Discovering iSCSI targets. This may take a moment..."#~ msgstr "正在查找 iSCSI 对象。此过程可能要花些时间..."#~ msgid "Discovering zFCP devices. This may take a moment..."#~ msgstr "正在查找 zFCP 设备。此过程可能要花些时间..."#~ msgid "Discovery login rejected."#~ msgstr "Discovery 登录被拒绝。"#~ msgid "Disk"#~ msgstr "磁盘"#~ msgid "Disk \"{}\" given in clearpart command does not exist."#~ msgstr "clearpart 命令中的磁盘 \"{}\" 不存在。"#~ msgid "Disk \"{}\" given in ignoredisk command does not exist."#~ msgstr "ignoredisk 命令中的磁盘 \"{}\" 不存在。"#~ msgid "Disk \"{}\" given in nvdimm command does not exist."#~ msgstr "nvdimm 命令中指定的磁盘 \"{}\" 不存在。"#~ msgid "Disk \"{}\" given in part command does not exist."#~ msgstr "part 命令中指定的磁盘 “{}” 不存在。"#~ msgid "Disk \"{}\" in part command is not partitioned."#~ msgstr "part 命令中的磁盘 “{}” 没有被分区。"#~ msgid "Disk formatting complete."#~ msgstr "磁盘格式化完成。"#~ msgid "Disk rescan complete."#~ msgstr "磁盘重新扫描完成。"#~ msgid "Disk summary goes here"#~ msgstr "磁盘概述请看这里"#~ msgid ""#~ "Disklabel \"{}\" given in clearpart command is not supported on this "#~ "platform."#~ msgstr "clearpart 命令中的磁盘标签 \"{}\" 在这个平台上不被支持。"#~ msgid "Disks left unselected here will not be touched."#~ msgstr "此处未选择的磁盘将不会被操作。"#~ msgctxt "GUI|Custom Partitioning|Confirm Delete Dialog"#~ msgid "Do _not show this dialog for other selected file systems."#~ msgstr "对其他选择的文件系统不显示此对话框 (_N)。"#~ msgid "Do you really want to quit?"#~ msgstr "您确定要停止吗？"#~ msgid "Downloading group metadata..."#~ msgstr "正在下载组元数据......"#~ msgid "Downloading packages"#~ msgstr "正在下载软件包"#, python-brace-format#~ msgid ""#~ "Downloading {total_files} RPMs, {downloaded_size} / {total_size} "#~ "({total_percent}%) done."#~ msgstr ""#~ "正在下载 {total_files} 个 RPM 包，{downloaded_size} / {total_size}，已完"#~ "成 {total_percent}%。"#~ msgid "Downloading {}"#~ msgstr "正在下载 {}"#~ msgid "Downloading {} ({}%)"#~ msgstr "正在下载 {} ({}%)"#~ msgid "Duplicate repository names"#~ msgstr "复制软件仓库名称"#~ msgid "EFI System Partition"#~ msgstr "EFI 系统分区"#~ msgid "Edit"#~ msgstr "编辑"#~ msgid ""#~ "Either a group name in the group list is invalid or groups are not "#~ "separated by a comma."#~ msgstr "组列表中的组名无效，或者组列表中的各组之间没有用逗号分开。"#~ msgid "Empty"#~ msgstr "空白"#~ msgid "Empty URL"#~ msgstr "空的 URL"#~ msgid "Empty path"#~ msgstr "空路径"#~ msgid "Empty repository name"#~ msgstr "空白软件仓库名称"#~ msgid "Empty server"#~ msgstr "空的服务器"#~ msgid "Enabled if supported by the installing machine"#~ msgstr "所安装机器如支持则启用"#~ msgid "Enabled unconditionally"#~ msgstr "无条件启用"#~ msgctxt "GUI|Password"#~ msgid ""#~ "Enabling the root account will allow you to set a root password and "#~ "optionally enable remote access to root account on this system."#~ msgstr ""#~ "启用 root 帐户将允许您设置 root 密码并选择性地启用对此系统上的 root 帐户的"#~ "远程访问。"#~ msgctxt "GUI|Custom Partitioning|Autopart Page"#~ msgid "Encrypt my data."#~ msgstr "加密我的数据。"#, python-format#~ msgid ""#~ "Encryption requested for LUKS device %s but no encryption key specified "#~ "for this device."#~ msgstr "为 LUKS 设备 %s 请求加密，但没有为该设备指定密钥。"#~ msgid "End date"#~ msgstr "终止日期"#, python-format#~ msgid "Enter '%s' to ignore the warning and attempt to install anyway."#~ msgstr "输入 '%s' 以忽略警告并尝试安装。"#, python-format#~ msgid "Enter a new value for '%(title)s' and press %(enter)s"#~ msgstr "为 “%(title)s” 输入新值然后按 %(enter)s"#, python-format#~ msgid "Enter an NTP server address and press %s"#~ msgstr "输入 NTP 服务器地址并按 %s"#~ msgid "Enter size and unit."#~ msgstr "输入大小和单位。"#~ msgid "Enterprise"#~ msgstr "企业"#~ msgid "Entitlements"#~ msgstr "权利"#~ msgid "Error adding FCoE SAN."#~ msgstr "添加 FCoE SAN 时出错。"#~ msgid ""#~ "Error checking software dependencies. <a href=\"\">Click for details.</a>"#~ msgstr "检查软件依赖关系时出错。<a href=\"\">点击查看详情。</a>"#~ msgid "Error checking software selection"#~ msgstr "检查软件选择出错"#~ msgid "Error checking storage configuration"#~ msgstr "检查存储配置出错"#~ msgid ""#~ "Error checking storage configuration. <a href=\"\">Click for details.</a>"#~ msgstr "检查存储配置时出错。<a href=\"\">点击查看详情。</a>"#~ msgid ""#~ "Error checking storage configuration. <a href=\"\">Click for details</a> "#~ "or press Done again to continue."#~ msgstr ""#~ "检查存储配置时出错。<a href=\"\">点击查看详情</a>或再次按完成按钮继续。"#~ msgid ""#~ "Error checking storage configuration. <a href=\"\">Click for details</a> "#~ "or press Done again to continue."#~ msgstr ""#~ "检查存储配置时出错。<a href=\"\">点击查看详情</a>或再次按完成按钮继续。"#~ msgid "Error detail: "#~ msgstr "错误详情： "#~ msgid "Error setting up repositories"#~ msgstr "错误设置软件仓库"#~ msgid "Escrow certificate {} requires the network."#~ msgstr "托管证书 {} 需要网络 。"#~ msgid "Ethernet"#~ msgstr "以太网"#~ msgid "Example:"#~ msgstr "示例："#~ msgid "Exit the shell to continue"#~ msgstr "退出 shell 以继续"#~ msgid "Extra characters in proxy URL"#~ msgstr "代理 URL 中有多余字符"#, python-brace-format#~ msgid ""#~ "FCP device {hba_id}\n"#~ "WWPN {wwpn}\n"#~ "LUN {lun}"#~ msgstr ""#~ "FCP 设备 {hba_id}\n"#~ "WWPN {wwpn}\n"#~ "LUN {lun}"#~ msgid "FOO"#~ msgstr "FOO"#~ msgid "Failed to add a device."#~ msgstr "添加设备失败。"#~ msgid "Failed to add new device."#~ msgstr "添加新设备失败。"#, python-brace-format#~ msgid "Failed to add the '{name}' repository: {details}"#~ msgstr "无法添加“{name}”软件仓库：{details}"#~ msgid "Failed to attach subscription."#~ msgstr "附加订阅失败。"#~ msgid "Failed to change a device."#~ msgstr "更改设备失败。"#~ msgid "Failed to save boot loader configuration"#~ msgstr "保存引导程序配置失败"#~ msgid "Failed to set up installation source; check the NFS configuration."#~ msgstr "无法设置安装源； 检查NFS配置。"#~ msgid "Failed to set up installation sources; check their configurations."#~ msgstr "无法设置安装源； 检查他们的配置。"#~ msgid "Failed to unlock encrypted block device."#~ msgstr "解锁加密块设备失败。"#~ msgid ""#~ "Failed to write boot loader configuration. More information may be found "#~ "in the log files stored in /tmp"#~ msgstr ""#~ "无法写入引导加载程序配置。 更多信息可以在 /tmp 中存储的日志文件中找到"#~ msgid "Fair"#~ msgstr "适中"#~ msgctxt "GUI|Custom Partitioning|Configure"#~ msgid "File S_ystem:"#~ msgstr "文件系统(Y)："#~ msgid "File system type \"{}\" given in autopart command is invalid."#~ msgstr "autopart 命令中的文件系统类型 \"{}\" 无效。"#~ msgctxt "GUI|Installation Destination|Filter|NVDIMM Devices"#~ msgid "Filter B_y:"#~ msgstr "过滤条件(y)："#~ msgctxt "GUI|Installation Destination|Filter|zSeries"#~ msgid "Filter B_y:"#~ msgstr "过滤条件(y)："#~ msgctxt "GUI|Installation Destination|Filter|Multipath"#~ msgid "Filter _By:"#~ msgstr "过滤方式(_B)："#~ msgctxt "GUI|Installation Destination|Filter|Other"#~ msgid "Filter _By:"#~ msgstr "过滤方式(_B)："#~ msgid "Firmware missing"#~ msgstr "缺失固件"#~ msgid ""#~ "Firmware will verify the integrity of the Linux kernel during boot if the "#~ "Secure Boot is enabled and configured on the machine. Secure Boot is not "#~ "supported on IBM z14 and earlier models, therefore choose to disable it "#~ "if you intend to boot the installed system on such models."#~ msgstr ""#~ "如果在计算机上启用并配置了安全启动，则固件将在启动过程中验证 Linux 内核的"#~ "完整性。 IBM z14和更早型号不支持安全启动，因此，如果要在此类型号上引导已安"#~ "装的系统，请选择禁用此功能。"#~ msgid "First sector of boot partition"#~ msgstr "引导分区的第一个扇区"#~ msgid "Fixed"#~ msgstr "固定容量"#~ msgid "Flatpak"#~ msgstr "Flatpak"#~ msgid "Flatpak installation has finished"#~ msgstr "Flatpak 安装已完成"#~ msgid ""#~ "For a UEFI installation, you must include a Linux HFS+ ESP on a GPT-"#~ "formatted disk, mounted at /boot/efi."#~ msgstr ""#~ "对于一个 UEFI 安装，必须包括一个在 GPT 格式磁盘中的 Linux HFS+ ESP 分区，"#~ "并挂载在 /boot/efi。"#~ msgid ""#~ "For a UEFI installation, you must include an EFI System Partition on a "#~ "GPT-formatted disk, mounted at /boot/efi."#~ msgstr ""#~ "在 UEFI 的安装中，必须包括一个位于 GPT 格式磁盘上的 EFI 系统分区，并且挂载"#~ "到 /boot/efi。"#~ msgid "Format"#~ msgstr "格式"#~ msgid "Formatting DASDs"#~ msgstr "正在格式化 DASD"#~ msgid "Free"#~ msgstr "空闲"#~ msgid "Free space"#~ msgstr "空闲空间"#~ msgid "Free space available for use."#~ msgstr "可供使用的空间。"#~ msgid "Free space unavailable but reclaimable from existing partitions."#~ msgstr "可从现有分区中回收的空闲空间。"#~ msgctxt "GUI|Storage"#~ msgid "Free up space by re_moving or shrinking existing partitions"#~ msgstr "通过删除或压缩已有分区来释放空间(_M)"#~ msgid "Full Name"#~ msgstr "全名"#~ msgid "Full name can't contain the ':' character"#~ msgstr "全名中不能包含“:”字符"#~ msgid "Fully numeric name is not allowed."#~ msgstr "不允许使用全数字名称。"#~ msgid "GRUB2 does not support installation to a partition."#~ msgstr "GRUB2 不支持安装到分区。"#~ msgid "GRUB2 encrypted password must be in grub.pbkdf2 format."#~ msgstr "GRUB2 加密的密码需要是 grub.pbkdf2 格式。"#~ msgid "Gateway"#~ msgstr "网关"#~ msgid "Gathering entropy (time ran out)"#~ msgstr "正在收集熵（时间耗尽）"#~ msgid "Gathering entropy 100%"#~ msgstr "正在收集熵 100%"#, python-brace-format#~ msgid "Gathering entropy {percents}% (remaining time {time})"#~ msgstr "正在收集熵 {percents}%（剩余时间 {time}）"#~ msgid "Generating initramfs"#~ msgstr "正在生成 initramfs"#~ msgid "Getting list of layouts..."#~ msgstr "正在获得布局列表..."#, python-format#~ msgid "Giving up attempting to connect after %d try!\n"#~ msgid_plural "Giving up attempting to connect after %d tries!\n"#~ msgstr[0] "在 %d 次连接尝试失败后放弃！\n"#~ msgid "Good"#~ msgstr "好"#~ msgid "Graphical installation is not available. Starting text mode."#~ msgstr "无法使用图形化安装。正在启动文本模式。"#~ msgid "Group Membership"#~ msgstr "组成员"#~ msgid "Group Name"#~ msgstr "组名称"#~ msgid "Group Password"#~ msgstr "组密码"#~ msgid "Groups"#~ msgstr "组"#~ msgctxt "GUI|Network|Proxy"#~ msgid "HTTP _Proxy"#~ msgstr "HTTP 代理(_P)"#~ msgctxt "GUI|Network|Proxy"#~ msgid "H_TTPS Proxy"#~ msgstr "HTTPS 代理(_T)"#~ msgid "Hardware Address"#~ msgstr "硬件地址"#~ msgid "Hardware error occurred"#~ msgstr "发生硬件错误"#~ msgid "Help!"#~ msgstr "帮助！"#~ msgid ""#~ "Here we'll describe how much space is needed for the current software "#~ "selection."#~ msgstr "我们将在这里告诉您目前所选软件需要多少空间。"#~ msgid "Here we'll describe what your options are."#~ msgstr "我们将在这里为您解释选项的意思。"#~ msgid "Hide password."#~ msgstr "隐藏密码。"#~ msgctxt "GUI|Advanced User"#~ msgid "Home _directory:"#~ msgstr "主目录(_D)："#, python-format#~ msgid "Host Name: %s\n"#~ msgstr "主机名：%s\n"#~ msgid "Host name cannot be None or an empty string."#~ msgstr "主机名不能为无或使用空白字符串。"#, python-format#~ msgid "Host name is not valid: %s"#~ msgstr "主机名无效：%s"#~ msgid "Host name or IP address of the NFS server"#~ msgstr "NFS 服务器的主机名或 IP 地址"#~ msgid ""#~ "Host names can only contain the characters 'a-z', 'A-Z', '0-9', '-', or "#~ "'.', parts between periods must contain something and cannot start or end "#~ "with '-'."#~ msgstr ""#~ "主机名只能包含 'a-z'、'A-Z'、 '0-9'、 '-'（英文减号），或者 '.'（英文点"#~ "号），其中两个点号中不能为空且不能以 '-' 开头或结尾。"#~ msgid "Hour Down"#~ msgstr "下调小时"#~ msgid "Hour Up"#~ msgstr "上调小时"#~ msgid "Hours"#~ msgstr "小时"#~ msgctxt "GUI|Welcome|Beta Warn Dialog"#~ msgid "I want to _exit"#~ msgstr "我需要退出 (e)"#~ msgctxt "GUI|Welcome|Beta Warn Dialog"#~ msgid "I want to _proceed"#~ msgstr "我需要继续 (p)"#~ msgid "ID"#~ msgstr "ID"#~ msgid "IMEI"#~ msgstr "IMEI"#~ msgid "INSTALLATION DESTINATION"#~ msgstr "安装目标位置"#~ msgid "INSTALLATION OPTIONS"#~ msgstr "安装选项"#~ msgid "INSTALLATION PROGRESS"#~ msgstr "安装进度"#~ msgid "INSTALLATION SOURCE"#~ msgstr "安装源"#~ msgid "INSTALLATION SUMMARY"#~ msgstr "安装信息摘要"#~ msgid "IP Address"#~ msgstr "IP 地址"#~ msgid "IPv4 Address"#~ msgstr "IPv4 地址"#, python-format#~ msgid "IPv4 address or %s for DHCP"#~ msgstr "IPv4 地址或 %s 以启用 DHCP"#~ msgid "IPv4 gateway"#~ msgstr "IPv4 网关"#~ msgid "IPv4 netmask"#~ msgstr "IPv4 子网掩码"#~ msgid "IPv6 Address"#~ msgstr "IPv6 地址"#, python-format#~ msgid ""#~ "IPv6 address[/prefix] or %(auto)s for automatic, %(dhcp)s for DHCP, "#~ "%(ignore)s to turn off"#~ msgstr ""#~ "IPv6 地址[/prefix] 或 %(auto)s 以自动连接，%(dhcp)s 以使用 DHCP ，或者 "#~ "%(ignore)s 以关闭"#~ msgid "IPv6 default gateway"#~ msgstr "IPv6 默认网关"#~ msgid "Identifier"#~ msgstr "标示符"#~ msgid "Identity: "#~ msgstr "身份： "#~ msgid "In FIPS mode, the passphrase must be at least {} letters long."#~ msgstr "在 FIPS 模式下，密码长度必须至少为 {} 个字母。"#~ msgid ""#~ "Incorrectly specified origin of the snapshot. Use format \"VolGroup/LV-"#~ "name\""#~ msgstr "指定的快照源不正确。使用 \"VolGroup/LV-name\" 格式"#~ msgid "Insights"#~ msgstr "Insights"#~ msgid "Install additional software from a specified URL"#~ msgstr "从指定的 URL 安装其他软件"#~ msgid "Install additional software from an NFS server"#~ msgstr "从 NFS 服务器安装其他软件"#~ msgid "Install additional software from another source"#~ msgstr "从另一个来源安装其他软件"#~ msgctxt "GUI|Software Source"#~ msgid ""#~ "Install the _default versions provided by the installation source (above) "#~ "only"#~ msgstr "只安装以上安装源内提供的默认版本 (_D)"#~ msgctxt "GUI|Software Source"#~ msgid "Install the _latest available software updates"#~ msgstr "安装软件的最新更新(_L)"#~ msgid "Install the live CD to your hard disk"#~ msgstr "将 Live CD 安装到您的硬盘"#~ msgid "Install to Hard Drive"#~ msgstr "安装到硬盘"#~ msgid "Installation"#~ msgstr "安装"#~ msgid "Installation Destination"#~ msgstr "安装目标位置"#~ msgctxt "GUI|Spoke"#~ msgid "Installation _Destination"#~ msgstr "安装目标位置(_D)"#~ msgid "Installation complete"#~ msgstr "安装完成"#, python-format#~ msgid "Installation complete. Press %s to quit"#~ msgstr "安装完成。请 %s 退出"#~ msgctxt "GUI|Software Source"#~ msgid "Installation media via SE/_HMC"#~ msgstr "通过 SE/HMC 的安装介质"#, python-format#~ msgid "Installation requires a total of <b>%s</b> for system data."#~ msgstr "安装系统数据共需要 <b>%s</b> 空间。"#~ msgid ""#~ "Installation requires partitioning of your hard drive. Select what space "#~ "to use for the install target or manually assign mount points."#~ msgstr ""#~ "安装过程需要对您的硬盘进行分区。请选择要用于安装目标的磁盘空间，或者手动分"#~ "配挂载点。"#~ msgid "Installation source"#~ msgstr "安装源"#~ msgid "Installation source needs to be set up first."#~ msgstr "需要首先设置安装源。"#~ msgid "Installation source not set up"#~ msgstr "没有设置安装源"#~ msgid "Installing Flatpak applications"#~ msgstr "正在安装 Flatpak 应用"#~ msgid "Installing boot loader"#~ msgstr "正在安装引导装载程序"#~ msgid "Installing software {}"#~ msgstr "正在安装软件 {}"#~ msgid "Installing software {}%"#~ msgstr "正在安装软件 {}%"#~ msgid "Installing software..."#~ msgstr "正在安装软件..."#~ msgid "Installing the software"#~ msgstr "正在安装软件"#~ msgid "Installing {}"#~ msgstr "正在安装 {}"#~ msgid "Interconnect"#~ msgstr "互连"#~ msgid "Interface"#~ msgstr "接口"#~ msgid ""#~ "Invalid NFS server, exactly one colon ':' must be present between host "#~ "and directory"#~ msgstr "NFS 服务器地址无效，端口和目录间必须要有一个\":\""#~ msgid "Invalid URL"#~ msgstr "无效 URL"#~ msgid "Invalid container name."#~ msgstr "容器名称无效。"#~ msgid "Invalid environment specified in kickstart"#~ msgstr "kickstart 中指定了无效环境"#~ msgid "Invalid group name."#~ msgstr "组名称无效。"#~ msgid ""#~ "Invalid input. Specify the Desired Capacity in whole or decimal numbers, "#~ "with an appropriate unit."#~ msgstr "无效输入。请以整数或十进制小数指定期望容量，并带上合适的单位。"#~ msgid "Invalid mount point given"#~ msgstr "指定的挂载点无效"#~ msgid "Invalid or unsupported format given"#~ msgstr "设置的格式无效或不受支持"#~ msgid "Invalid protocol"#~ msgstr "无效协议"#~ msgid "Invalid proxy URL"#~ msgstr "无效代理 URL"#, python-format#~ msgid "Invalid proxy protocol: %s"#~ msgstr "无效代理协议：%s"#~ msgid "Invalid repository name"#~ msgstr "无效软件仓库名称"#~ msgid "Invalid server"#~ msgstr "无效的服务器"#~ msgid "Invalid time source."#~ msgstr "无效的时间来源。"#~ msgid "Invalid timezone"#~ msgstr "无效的时区"#, python-format#~ msgid ""#~ "Invalid user name: %(name)s.\n"#~ "%(error_message)s"#~ msgstr ""#~ "无效用户名：%(name)s。\n"#~ "%(error_message)s"#, python-format#~ msgid ""#~ "It is recommended to create a new file system on your %(mount)s partition."#~ msgstr "建议在您的 %(mount)s 分区上创建一个新的文件系统。"#~ msgid "KEYBOARD LAYOUT"#~ msgstr "键盘布局"#~ msgid ""#~ "Keyboard layouts are not supported when using VNC.\n"#~ "However the settings will be used after the installation."#~ msgstr ""#~ "使用 VNC 时不支持键盘布局。\n"#~ "但相关设置可在安装后使用。"#~ msgid "Kickstart insufficient"#~ msgstr "无法使用 Kickstart"#~ msgid "LANGUAGE SUPPORT"#~ msgstr "语言支持"#~ msgid "LAYOUT SWITCHING OPTIONS"#~ msgstr "布局切换选项"#~ msgid "LOCALIZATION"#~ msgstr "本地化"#~ msgid "LUKS Version:"#~ msgstr "LUKS 版本："#~ msgctxt "GUI|Custom Partitioning|Configure"#~ msgid "LUK_S Version:"#~ msgstr "LUKS 版本(_S)："#~ msgid "LUN"#~ msgstr "LUN"#~ msgid "LUN:"#~ msgstr "LUN:"#~ msgid "LVM"#~ msgstr "LVM"#~ msgid "LVM Thin Provisioning"#~ msgstr "LVM 简单配置"#~ msgid "Label:"#~ msgstr "标签："#, python-format#~ msgid "Label: %s"#~ msgstr "标签：%s"#~ msgid "Language is not set."#~ msgstr "语言未设置。"#~ msgid "Language settings"#~ msgstr "语言设置"#~ msgid "Languages"#~ msgstr "语言"#~ msgid "Layout Options"#~ msgstr "布局选项"#~ msgid "Layout switching not configured."#~ msgstr "未配置布局切换。"#~ msgid "Live OS"#~ msgstr "Live 操作系统"#~ msgid "Live image"#~ msgstr "Live 镜像"#~ msgid "Live tarball"#~ msgstr "Live tar包"#~ msgid "Liveinst Setup"#~ msgstr "Liveinst 设置"#~ msgid "Local Standard Disks"#~ msgstr "本地标准磁盘"#~ msgid "Local host name must not end with period '.'."#~ msgstr "本地主机名不能以英文句号“.”结尾。"#~ msgid "Local media"#~ msgstr "本地介质"#~ msgid "Local media via SE/HMC"#~ msgstr "通过 SE/HMC 的本地介质"#~ msgid "Local repositories"#~ msgstr "本地软件仓库"#~ msgid "Locales"#~ msgstr "区域"#~ msgid "Logical volume \"{}\" given in logvol command does not exist."#~ msgstr "logvol 命令中指定的逻辑卷“{}”不存在。"#~ msgid "Logical volume name \"{}\" is already in use in volume group \"{}\"."#~ msgstr "逻辑卷名称“{}”已经在卷组“{}”中使用。"#~ msgid ""#~ "Logical volume size \"{}\" must be larger than the volume group extent "#~ "size of \"{}\"."#~ msgstr "逻辑卷尺寸“{}”必须大于卷组区间尺寸的 “{}”。"#~ msgid "MANUAL PARTITIONING"#~ msgstr "手动分区"#~ msgid "MEDIA VERIFICATION"#~ msgstr "介质效验"#~ msgid "Manually assign mount points"#~ msgstr "手动分配挂载点"#~ msgid "Master Boot Record"#~ msgstr "主引导记录"#~ msgid "Memory"#~ msgstr "内存"#~ msgid "Metalink"#~ msgstr "元链接"#~ msgid "Method"#~ msgstr "方法"#~ msgid "Minutes"#~ msgstr "分钟"#~ msgid "Minutes Down"#~ msgstr "下调分钟"#~ msgid "Minutes Up"#~ msgstr "上调分钟"#~ msgid "Mirrorlist"#~ msgstr "镜像列表"#~ msgid "Missing name of the %addon section."#~ msgstr "缺少 %addon 小节的名称。"#~ msgid "Mode"#~ msgstr "模式"#~ msgid "Model"#~ msgstr "型号"#~ msgctxt "GUI|Software Selection|Error Dialog"#~ msgid "Modify _Selections"#~ msgstr "修改选择(_S)"#~ msgid "More Network Config Box"#~ msgstr "更多网络配置"#~ msgid ""#~ "More customization options are available\n"#~ "after creating the mount point below."#~ msgstr ""#~ "在下方创建挂载点后\n"#~ "有更多自定义选项可用。"#~ msgid "More than one match found for given boot drive \"{}\"."#~ msgstr "找到多个指定引导驱动 \"{}\" 的匹配项。"#~ msgctxt "GUI|Custom Partitioning|Add Dialog"#~ msgid "Mount _Point:"#~ msgstr "挂载点(_P)："#~ msgctxt "GUI|Custom Partitioning|Configure|Devices"#~ msgid "Mount _Point:"#~ msgstr "挂载点(_P)："#~ msgctxt "GUI|Keyboard Layout"#~ msgid "Move selected layout _down"#~ msgstr "向下移动选中布局(_D)"#~ msgctxt "GUI|Keyboard Layout"#~ msgid "Move selected layout _up"#~ msgstr "向上移动选中布局(_U)"#~ msgid "My ssid"#~ msgstr "我的 ssid"#~ msgid "NETWORK & HOST NAME"#~ msgstr "网络和主机名(_N)"#~ msgid "NETWORK CONFIGURATION"#~ msgstr "网络配置"#~ msgid "NFS mount options"#~ msgstr "NFS 挂载选项"#~ msgid "NFS server is empty"#~ msgstr "未填写 NFS 服务器"#~ msgid "NFS server {}"#~ msgstr "NFS 服务器 {}"#~ msgid "NIC \"{}\" given in fcoe command does not exist."#~ msgstr "fcoe 命令中给出的网卡 “{}” 不存在。"#~ msgid "NTP configuration"#~ msgstr "NTP 配置"#, python-brace-format#~ msgid "NVDIMM device {namespace}"#~ msgstr "NVDIMM 设备 {namespace}"#~ msgctxt "GUI|Software Source"#~ msgid "N_FS mount options:"#~ msgstr "NFS 挂载选项(_F)："#~ msgid "Name '$' is not allowed."#~ msgstr "不允许使用 \"$\" 作为名称。"#, python-format#~ msgid "Name '%s' is invalid."#~ msgstr "名称“%s”无效。"#, python-format#~ msgid "Name '%s' is not allowed."#~ msgstr "不允许使用 \"%s\" 作为名称。"#, python-format#~ msgid "Name cannot contain character: '%s'"#~ msgstr "名称中不能包含字符：\"%s\""#~ msgid "Name cannot start with '-' character."#~ msgstr "名称不能以”-“开始。"#~ msgid "Name is already in use."#~ msgstr "名称已被使用。"#~ msgid "Name of the repository"#~ msgstr "软件仓库名称"#~ msgid "Nameservers (comma separated)"#~ msgstr "域名服务器(以逗号分隔)"#~ msgid "Namespace"#~ msgstr "命名空间"#~ msgid "Namespace \"{}\" given in nvdimm command was not found."#~ msgstr "未找到 nvdimm 命令中所指定的命名空间 \"{}\"。"#~ msgid "Need Space"#~ msgstr "需要空间"#~ msgid "Network Config Box"#~ msgstr "网络配置"#~ msgid "Network Name"#~ msgstr "网络名称"#~ msgid "Network configuration is not available."#~ msgstr "网络配置不可用。"#, python-brace-format#~ msgid ""#~ "Network interface \"{nic}\" required by iSCSI \"{iscsi_target}\" target "#~ "is not up."#~ msgstr "iSCSI 目标“{iscsi_target}”所要求的网络接口“{nic}”没有开启。"#~ msgid "New Device"#~ msgstr "新设备"#~ msgid "New Selector"#~ msgstr "新选择"#, python-brace-format#~ msgid "New {name} {version} Installation"#~ msgstr "新 {name} {version} 安装"#~ msgid "No *.iso files found in device root folder"#~ msgstr "没有在设备的根目录下找到 *.iso 文件"#~ msgid "No credentials (discovery authentication disabled)"#~ msgstr "无凭据（发现身份验证已禁用）"#~ msgctxt "GUI|Advanced Storage|NVDIM"#~ msgid "No device to be reconfigured selected."#~ msgstr "没有选择需要重新配置的设备。"#~ msgid "No disk found for specified BIOS disk \"{}\"."#~ msgstr "指定的 BIOS 磁盘 \"{}\" 没有找到。"#~ msgid "No disks assigned"#~ msgstr "未分配磁盘"#~ msgid ""#~ "No disks detected. Please shut down the computer, connect at least one "#~ "disk, and restart to complete installation."#~ msgstr ""#~ "没有检测到磁盘。请关闭计算机并至少连接一块磁盘后，重新启动进行安装。"#~ msgid "No disks selected."#~ msgstr "未选择任何磁盘。"#~ msgid "No disks selected. Keeping previous disk set."#~ msgstr "未选择磁盘。保留之前的磁盘选择。"#~ msgid "No format on device '{}'"#~ msgstr "设备 '{}' 上没有格式"#~ msgid "No host url"#~ msgstr "无主机 URL"#~ msgid "No match found for given boot drive \"{}\"."#~ msgstr "没有找到指定引导驱动 \"{}\" 的匹配项。"#~ msgid "No network devices available"#~ msgstr "没有可用的网络设备"#~ msgid "No repository is configured."#~ msgstr "没有配置软件仓库。"#~ msgid "No subscriptions are attached to the system"#~ msgstr "系统没有已附加的订阅"#~ msgid "No subscriptions have been attached to the system"#~ msgstr "还没有订阅附加至此系统"#~ msgid ""#~ "No thin pool exists with the name \"{}\". Specify thin pools before thin "#~ "volumes."#~ msgstr ""#~ "名称为“{}”的瘦池（thin pool）不存在。在指定瘦卷（thin volume）之前先指定瘦"#~ "池。"#~ msgid "No usable disks selected."#~ msgstr "未选择可用磁盘。"#~ msgid "No usable disks."#~ msgstr "无可用磁盘。"#~ msgid "No valid boot loader target device found. See below for details."#~ msgstr "未找到有效的引导程序目标设备。详情见下方。"#~ msgid ""#~ "No volume group exists with the name \"{}\". Specify volume groups before "#~ "logical volumes."#~ msgstr "名称为“{}”的卷组不存在。在指定逻辑卷前先指定卷组。"#~ msgid "Node Name"#~ msgstr "节点名称"#~ msgid "None"#~ msgstr "无"#~ msgid "Not Specified"#~ msgstr "未指定"#~ msgid "Not connected"#~ msgstr "未连接"#~ msgid "Not connected to Red Hat Insights"#~ msgstr "未连接至 Red Hat Insights"#~ msgid "Not enough RAM"#~ msgstr "内存不足"#~ msgid "Not enough free space on selected disks."#~ msgstr "所选磁盘中没有足够剩余空间。"#~ msgid "Not enough space in file systems for the current software selection."#~ msgstr "文件系统没有足够的空间来安装当前的软件选择。"#~ msgid ""#~ "Not enough space in file systems for the current software selection. An "#~ "additional {} is needed."#~ msgstr "文件系统没有足够的空间来安装当前的软件选择。还需要 {} 额外空间。"#~ msgid "Not mounting the system.\n"#~ msgstr "没有挂载系统。\n"#~ msgid "Not registered."#~ msgstr "未注册。"#~ msgid "Not required"#~ msgstr "不需要"#~ msgid "Not resizeable"#~ msgstr "不能调整大小"#~ msgid ""#~ "Note: The settings you make on this screen will not be applied until you "#~ "click on the main menu's 'Begin Installation' button."#~ msgstr ""#~ "注意：在您点击主菜单上的“开始安装“按钮之前”，您在本屏幕内所做的设置更改不"#~ "会被应用。"#~ msgid "Nothing selected"#~ msgstr "未选择"#~ msgid "Nothing to format"#~ msgstr "无需进行格式化"#~ msgid ""#~ "Notice: This is pre-released software that is intended for development "#~ "and testing purposes only. Do *not* use this software for any critical "#~ "work or for production environments.\n"#~ "\n"#~ "By clicking \"I want to proceed\", you understand and accept the risks "#~ "associated with pre-released software, that you intend to use this for "#~ "testing and development purposes only and are willing to report any bugs "#~ "or issues in order to enhance this work.\n"#~ "\n"#~ "If you do not understand or accept the risks, then please exit this "#~ "program by selecting \"I want to exit\" which will reboot your system."#~ msgstr ""#~ "注意：这是预发布软件，仅用于开发和测试。请勿在重要工作或生产环境中使用该软"#~ "件。\n"#~ "\n"#~ "点击 \"继续\" ，则说明您了解并接受预发行版的风险，只将该软件用于测试和开"#~ "发，并且愿意报告所有程序错误或问题，以便改进本软件。\n"#~ "\n"#~ "如果您不了解或不接受风险，请点击 \"退出\" 按钮退出程序。这将重启您的系统。"#~ msgctxt "GUI|Software Source|Media Check Dialog"#~ msgid "OK"#~ msgstr "确定"#~ msgid "Optional comma-separated list of mount options for the NFS mount"#~ msgstr "NFS Mount 的可选逗号分隔列表"#~ msgid ""#~ "Or, assign new mount points to existing partitions after selecting them "#~ "below."#~ msgstr "或者向下方选择的已有分区分配新挂载点。"#~ msgid "Order"#~ msgstr "顺序"#~ msgid "Organization"#~ msgstr "组织"#~ msgid "Other ({})"#~ msgstr "其他 ({})"#~ msgid "PM"#~ msgstr "PM"#~ msgid "PRE-RELEASE / TESTING"#~ msgstr "预发布/测试"#~ msgid "PReP Boot Partition"#~ msgstr "PReP 引导分区"#~ msgid "PV partition \"{}\" is defined multiple times."#~ msgstr "物理卷分区 “{}” 被定义多次。"#~ msgid "Parent"#~ msgstr "父级"#~ msgid "Partition \"{}\" given in part command does not exist."#~ msgstr "part 命令中指定的分区 “{}” 不存在。"#~ msgid "Partition Scheme Options"#~ msgstr "分区方案选项"#~ msgid "Partitioning Options"#~ msgstr "分区选项"#~ msgid ""#~ "Partitioning method changed - planned storage configuration changes will "#~ "be cancelled."#~ msgstr "分区模式已改变——已计划的存储配置变更将被取消。"#~ msgctxt "GUI|Software Source|Proxy Dialog"#~ msgid "Pass_word:"#~ msgstr "密码(W)："#~ msgid ""#~ "Passphrase given in the {} command is too short in FIPS mode. Please use "#~ "at least {} characters."#~ msgstr "在 FIPS 模式下，{} 命令中给出的密码太短。 请至少使用 {} 个字符。"#~ msgid "Password"#~ msgstr "密码"#~ msgid "Password (confirm): "#~ msgstr "密码（确认）： "#~ msgid "Password set."#~ msgstr "密码已设置。"#~ msgid "Password: "#~ msgstr "密码： "#~ msgid "Passwords do not match!"#~ msgstr "两次输入的密码不匹配！"#~ msgid ""#~ "Passwords or encryption keys are required to access\n"#~ "the wireless network"#~ msgstr ""#~ "访问无线网络需要\n"#~ "密码或密钥"#, python-format#~ msgid ""#~ "Passwords or encryption keys are required to access\n"#~ "the wireless network '%(network_id)s'."#~ msgstr ""#~ "访问无线网络 '%(network_id)s' 需要\n"#~ "密码或密钥。"#~ msgid "Path on the NFS server to the additional repository"#~ msgstr "NFS 服务器上的路径到附加软件仓库"#, python-format#~ msgid "Path: %s"#~ msgstr "路径：%s"#~ msgid "Paths"#~ msgstr "路径"#~ msgid "Performing post-installation Flatpak tasks"#~ msgstr "正在执行安装后的 Flatpak 任务"#~ msgid "Performing post-installation setup tasks"#~ msgstr "正在执行安装后设置"#~ msgid ""#~ "Physical volume \"{}\" has a format of \"{}\", but should have a format "#~ "of \"lvmpv\"."#~ msgstr "物理卷“{}”的格式为“{}”，但应该是“lvmpv”格式。"#~ msgid ""#~ "Please complete items marked with this icon before continuing to the next "#~ "step."#~ msgstr "请先完成带有此图标标记的内容再进行下一步。"#~ msgid "Please confirm software selection"#~ msgstr "请确认软件选择"#, python-format#~ msgid ""#~ "Please create a name for this %(container_type)s and select at least one "#~ "disk below."#~ msgstr "请为 %(container_type)s 起个名字然后从下方至少选择一个磁盘。"#~ msgid ""#~ "Please create a name for this container and select at least one disk "#~ "below."#~ msgstr "请为此容器起个名字然后从下方至少选择一个磁盘。"#~ msgid "Please enable network access before connecting to Red Hat."#~ msgstr "在连接到红帽之前，请启用网络连接。"#~ msgid "Please enter a mount point."#~ msgstr "请输入一个挂载点。"#~ msgid "Please enter a valid mount point."#~ msgstr "请输入一个有效的挂载点。"#, python-format#~ msgid "Please manually connect your vnc client to %s to begin the install."#~ msgstr "请手动将您的 vnc 客户端连接到 %s 来开始安装。"#, python-format#~ msgid ""#~ "Please manually connect your vnc client to IP-ADDRESS:%s to begin the "#~ "install. Switch to the shell (Ctrl-B 2) and run 'ip addr' to find the IP-"#~ "ADDRESS."#~ msgstr ""#~ "请手动将您的 VNC 客户端连接至 IP 地址：%s，以便开始安装。切换到 shell "#~ "(Ctrl-B 2) 然后运行“ip addr”命令可查看 IP 地址。"#, python-format#~ msgid "Please press %s to get a shell"#~ msgstr "请按 %s 键进入 shell"#~ msgid ""#~ "Please provide VNC password (must be six to eight characters long).\n"#~ "You will have to type it twice. Leave blank for no password"#~ msgstr ""#~ "请提供 VNC 密码（必须为 6-8 个字符）。\n"#~ "您需要输入该密码两次。如没有密码请留空"#~ msgid ""#~ "Please provide a default LUKS passphrase for all devices you want to "#~ "encrypt. You will have to type it twice."#~ msgstr "请为需要加密的所有设备提供一个默认的 LUKS 密码。您将需要输入两次。"#, python-format#~ msgid ""#~ "Please select a single mount point to edit properties.\n"#~ "\n"#~ "You have currently selected:\n"#~ "%s"#~ msgstr ""#~ "请选择一个挂载点来编辑属性。\n"#~ "\n"#~ "您目前已选择：\n"#~ "%s"#~ msgid "Please select language support to install"#~ msgstr "选择要安装的语言支持"#~ msgid "Please select new root password. You will have to type it twice."#~ msgstr "请设置新 root 密码。您需要输入两次。"#~ msgid ""#~ "Please select the network interface which is connected to your FCoE "#~ "switch."#~ msgstr "请选择已连接到您的 FCoE 交换机的网络接口。"#~ msgid "Please select the timezone. Use numbers or type names directly"#~ msgstr "请选择时区。使用数字或直接输入名称"#, python-format#~ msgid "Please ssh install@%s to begin the install."#~ msgstr "请运行 ssh install@%s 开始安装。"#~ msgid "Please ssh install@HOSTNAME to continue installation."#~ msgstr "请运行 ssh install@HOSTNAME 来继续进行安装。"#~ msgid ""#~ "Please use the live desktop environment's tools for customizing your "#~ "network configuration. You can set the host name here."#~ msgstr "请使用 live 桌面环境工具定制您的网络配置。在这里您可设置主机名。"#~ msgid "Please wait... software metadata still loading."#~ msgstr "请稍等...仍在加载软件元数据。"#~ msgid "Port"#~ msgstr "端口"#~ msgid "Port / Target / LUN #"#~ msgstr "端口 / 目标 / 逻辑单位数标示符 (_LUN #)"#~ msgid "Portal"#~ msgstr "门户"#~ msgid "Ports"#~ msgstr "端口"#~ msgid "Preparing deployment of {}"#~ msgstr "准备部署 {}"#~ msgid "Preparing to install"#~ msgstr "准备安装"#~ msgid "Preparing transaction from installation source"#~ msgstr "准备从安装源传送"#~ msgid "Preserve"#~ msgstr "保留"#~ msgctxt "GUI|Reclaim Dialog"#~ msgid "Preserve _all"#~ msgstr "保留全部(_A)"#~ msgid "Press <b>Done</b> again to use the password anyway."#~ msgstr "再次按<b>完成</b>按钮以使用该密码。"#~ msgid "Press ENTER to continue"#~ msgstr "按回车键继续"#~ msgid ""#~ "Pressing 'OK' below will take you to the disk selection screen where you "#~ "will need to re-select your disks."#~ msgstr "按下方的“OK”将带您到硬盘选择屏幕，然后您需要重新选择您的硬盘。"#~ msgid "Private key password: "#~ msgstr "私钥密码： "#~ msgctxt "GUI|Software Source"#~ msgid "Pro_xy:"#~ msgstr "代理 (X)："#~ msgid "Probing storage"#~ msgstr "正在检测存储"#~ msgid "Probing storage..."#~ msgstr "正在探测存储......"#~ msgid "Processing..."#~ msgstr "正在处理..."#~ msgid "Progress"#~ msgstr "进度"#~ msgid "Protocol in URL does not match selected protocol"#~ msgstr "URL 中的协议与所选协议不匹配"#~ msgid "Provider"#~ msgstr "供应商"#~ msgid "Proxy authentication data duplicated"#~ msgstr "代理验证数据重复"#~ msgid "Purpose"#~ msgstr "目的"#~ msgid "Quit (Reboot)"#~ msgstr "退出 (重启)"#~ msgid "RAID"#~ msgstr "RAID"#~ msgid "RAID Device"#~ msgstr "RAID 设备"#~ msgid "RAID Level:"#~ msgstr "RAID 级别："#~ msgid "RAID device \"{}\" given in raid command does not exist."#~ msgstr "raid 命令中指定的 RAID 设备“{}”不存在。"#~ msgid ""#~ "RAID device \"{}\" has a format of \"{}\", but should have a format of "#~ "\"mdmember\"."#~ msgstr "RAID 设备“{}”的格式为“{}”，但它应该是“mdmember”格式。"#~ msgid "RAID partition \"{}\" is defined multiple times."#~ msgstr "RAID 分区 “{}” 被定义多次。"#, python-format#~ msgid ""#~ "RAID sets that contain '%(desc)s' must have one of the following device "#~ "types: %(types)s."#~ msgstr "包含 '%(desc)s' 的 RAID 集必须拥有以下的设备类型之一：%(types)s。"#, python-format#~ msgid ""#~ "RAID sets that contain '%(desc)s' must have one of the following metadata "#~ "versions: %(metadata_versions)s."#~ msgstr ""#~ "包含 '%(desc)s' 的 RAID 集必须包含下列元数据版本之一："#~ "%(metadata_versions)s。"#, python-format#~ msgid ""#~ "RAID sets that contain '%(desc)s' must have one of the following raid "#~ "levels: %(raid_level)s."#~ msgstr ""#~ "包含 '%(desc)s' 的 RAID 集必须拥有以下的 raid 等级之一：%(raid_level)s。"#~ msgid "RAID volume \"{}\" specified with --useexisting does not exist."#~ msgstr "--useexiting 选项指定的 RAID 卷“{}”不存在。"#~ msgid "RAID0"#~ msgstr "RAID0"#~ msgid "RAID1"#~ msgstr "RAID1"#~ msgid "RAID10"#~ msgstr "RAID10"#~ msgid "RAID4"#~ msgstr "RAID4"#~ msgid "RAID5"#~ msgstr "RAID5"#~ msgid "RAID6"#~ msgstr "RAID6"#~ msgctxt "GUI|Custom Partitioning|Configure"#~ msgid "RA_ID Level:"#~ msgstr "RAID 级别(_I)："#~ msgid "RECLAIM DISK SPACE"#~ msgstr "回收磁盘空间"#~ msgid "RESCAN DISKS"#~ msgstr "重新扫描硬盘"#~ msgid "ROOT ACCOUNT"#~ msgstr "ROOT 帐户"#~ msgid "ROOT PASSWORD"#~ msgstr "ROOT 密码"#~ msgid "RPM OSTree"#~ msgstr "RPM 系统树"#~ msgid "RPM OSTree Container"#~ msgstr "RPM 系统树容器"#~ msgid "Read-only mount"#~ msgstr "只读挂载"#, python-brace-format#~ msgid "Receiving objects: {percent}% ({fetched}/{requested}) {bytes}"#~ msgstr "接收项：{percent}% ({fetched}/{requested}) {bytes}"#~ msgid "Reclaim"#~ msgstr "回收"#~ msgid "Reclaimable Space"#~ msgstr "可回收空间"#~ msgctxt "GUI|Installation Destination|Filter"#~ msgid "Reconfigure _NVDIMM..."#~ msgstr "重新配置 NVDIMM( _N)..."#~ msgid "Reconfiguring NVDIMM devices. This may take a moment..."#~ msgstr "重新配置 NVDIMM 设备。这需要一些时间..."#~ msgid "Red Hat CDN"#~ msgstr "红帽 CDN"#~ msgid "Red Hat CDN is unavailable for this installation."#~ msgstr "Red Hat CDN 无法用于此安装。"#~ msgid "Red Hat CDN requires registration."#~ msgstr "红帽 CDN 需要注册。"#~ msgid ""#~ "Red Hat Insights aims to increase your IT efficiency and speed across "#~ "hybrid infrastructures by identifying and prioritizing risks, managing "#~ "vulnerabilities, and compliance, and analyzing costs. For more "#~ "information, visit the Red Hat Insights information page."#~ msgstr ""#~ "Red Hat Insights 旨在通过识别和优先考虑风险、管理漏洞和合规性以及分析成"#~ "本，提高你在混合基础设施上的IT效率和速度。欲了解更多信息，请访问Red Hat "#~ "Insights 信息页面。"#~ msgctxt "GUI|Software Source"#~ msgid "Red Hat _CDN"#~ msgstr "红帽 CDN(_C)"#~ msgctxt "GUI|Custom Partitioning|Configure"#~ msgid "Ref_ormat"#~ msgstr "重新格式化(_O)"#~ msgid ""#~ "Reformatting the '{}' subvolume will remove the following nested "#~ "subvolumes which cannot be reused: {}"#~ msgstr "重新格式化“{}”子卷将删除以下无法重复使用的嵌套子卷：{}"#~ msgctxt "GUI|Custom Partitioning"#~ msgid "Refresh"#~ msgstr "刷新"#~ msgctxt "GUI|Installation Destination|Filter"#~ msgid "Refresh _List"#~ msgstr "刷新列表(_L)"#~ msgid "Region"#~ msgstr "地区"#~ msgid "Registered with account {}"#~ msgstr "已使用帐户 {} 注册"#~ msgid "Registered with organization {}"#~ msgstr "已使用组织 {} 注册"#~ msgid "Registered."#~ msgstr "已注册。"#~ msgid "Registering..."#~ msgstr "正在注册……"#~ msgid "Registration failed due to insufficient credentials."#~ msgstr "因凭据不足导致注册失败。"#~ msgid "Registration failed."#~ msgstr "注册失败。"#~ msgid "Remote directory is required"#~ msgstr "必须要有远程目录"#~ msgctxt "GUI|Custom Partitioning"#~ msgid "Remove"#~ msgstr "删除"#~ msgid "Remove the selected mount point(s)."#~ msgstr "删除已选挂载点。"#~ msgid "Remove the selected repository."#~ msgstr "移除已选软件仓库。"#~ msgid "Replace Existing Linux system(s)"#~ msgstr "替换现有 Linux 系统"#~ msgid "Repo URL"#~ msgstr "软件源 URL"#~ msgid "Repository URL"#~ msgstr "软件库 URL"#~ msgid "Repository name conflicts with internal repository name"#~ msgstr "软件仓库名称与内置软件仓库名称冲突"#~ msgid "Requested boot drive \"{}\" doesn't exist or cannot be used."#~ msgstr "所需的引导驱动 \"{}\" 不存在，不能被使用。"#~ msgid ""#~ "Rescanning disks after reconfiguration.\n"#~ "This may take a moment ..."#~ msgstr ""#~ "在重新配置后重新扫描磁盘。\n"#~ "这需要一些时间 ..."#~ msgid "Rescanning disks finished."#~ msgstr "重新扫描磁盘结束。"#~ msgid "Rescue"#~ msgstr "救援"#~ msgid "Rescue Shell"#~ msgstr "救援 Shell"#~ msgctxt "GUI|Software Source"#~ msgid "Rese_t"#~ msgstr "重置(_T)"#~ msgid "Restoring hardware time..."#~ msgstr "正在恢复硬件时间..."#~ msgctxt "GUI|Advanced Storage|iSCSI|Login|Retry"#~ msgid "Retry _Log In"#~ msgstr "重试登录(_L)"#~ msgctxt "GUI|Custom Partitioning"#~ msgid ""#~ "Return partitioning to the original state before you made any changes. "#~ "This is not a destructive operation."#~ msgstr "在您做出任何修改之前返回到分区的原始状态。这不是一个破坏性的操作。"#~ msgctxt "GUI|Advanced Storage|iSCSI|Configure|Reverse CHAP"#~ msgid "Reverse CHAP Pass_word:"#~ msgstr "反转 CHAP 密码(W)："#~ msgctxt "GUI|Advanced Storage|iSCSI|Login|Reverse CHAP"#~ msgid "Reverse CHAP Pass_word:"#~ msgstr "反转 CHAP 密码(W)："#~ msgctxt "GUI|Advanced Storage|iSCSI|Configure|Reverse CHAP"#~ msgid "Reverse CHAP User _name:"#~ msgstr "逆向 CHAP 用户名(_N)："#~ msgid "Revert to the previous list of repositories."#~ msgstr "恢复到之前的软件仓库列表。"#~ msgid "Reverting previous configuration. This may take a moment..."#~ msgstr "回到上一次配置。可能会需要一定时间……"#~ msgid "Role"#~ msgstr "角色"#~ msgid "Role: {}"#~ msgstr "角色: {}"#~ msgid "Root Selection"#~ msgstr "选择 root 分区"#~ msgid "Root password"#~ msgstr "Root 密码"#~ msgid "Root password is not set"#~ msgstr "Root 密码未设置"#~ msgid "Root password is set"#~ msgstr "已经设置 root 密码"#, python-format#~ msgid "Run %s to unmount the system when you are finished."#~ msgstr "完成后运行 %s 命令卸载该文件系统。"#~ msgid "Running post-installation scripts"#~ msgstr "正在运行安装后脚本"#~ msgid "Running pre-installation scripts"#~ msgstr "运行安装前脚本"#~ msgid "Running pre-installation tasks"#~ msgstr "运行预安装进程"#~ msgid "SE/HMC"#~ msgstr "SE/HMC"#~ msgid "SELECTED DISKS AND BOOT LOADER"#~ msgstr "选定的磁盘和引导加载程序"#~ msgid "SERVER:/PATH"#~ msgstr "服务器:/路径"#~ msgid "SKU"#~ msgstr "SKU"#~ msgid "SLA"#~ msgstr "SLA"#~ msgid "SLA: {}"#~ msgstr "SLA: {}"#~ msgid "SOFTWARE"#~ msgstr "软件"#~ msgid "SOFTWARE SELECTION"#~ msgstr "软件选择"#~ msgid "SPOKE NAME"#~ msgstr "SPOKE 名称"#~ msgid ""#~ "SSL error while downloading the escrow certificate:\n"#~ "\n"#~ "{}"#~ msgstr ""#~ "下载托管证书时出现 SSL 错误：\n"#~ "\n"#~ "{}"#~ msgid "SUMMARY OF CHANGES"#~ msgstr "更改摘要"#~ msgid "SYSTEM"#~ msgstr "系统"#~ msgid "SYSTEM PURPOSE"#~ msgstr "系统用途"#~ msgid "Saving storage configuration..."#~ msgstr "正在保存存储配置..."#~ msgid "Scanning disks. This may take a moment..."#~ msgstr "正在扫描硬盘。此过程要花些时间..."#~ msgid "Scanning disks. This may take a moment..."#~ msgstr "正在扫描磁盘。这可能会需要一些时间……"#~ msgctxt "GUI|Installation Destination|Filter"#~ msgid "Searc_h"#~ msgstr "搜索(_H)"#~ msgctxt "GUI|Installation Destination|Filter|Search"#~ msgid "Search Res_ults:"#~ msgstr "搜索结果(_U)："#~ msgctxt "GUI|Installation Destination|Filter|Search"#~ msgid "Search _By:"#~ msgstr "搜索方式(_B)："#~ msgid "Sector"#~ msgstr "Sector"#~ msgid "Secure Boot"#~ msgstr "安全启动"#~ msgid "Security"#~ msgstr "安全"#~ msgid "Security Key"#~ msgstr "安全密钥"#~ msgid ""#~ "Select a drive for the mount point to be created on. If you select "#~ "multiple, only 1 drive will be used."#~ msgstr ""#~ "为要在其上创建的安装点选择一个驱动器。如果选择多个，将只使用一个驱动器。"#~ msgid "Select a network"#~ msgstr "选择网络"#~ msgid "Select a network to configure"#~ msgstr "选择网络进行配置"#~ msgid "Select a partition scheme configuration."#~ msgstr "选择一个分区方案配置。"#~ msgid "Select additional language support to be installed:"#~ msgstr "选择要安装的附加语言支持："#~ msgid "Select all"#~ msgstr "选择全部"#~ msgid ""#~ "Select all of the drives you would like the mount point to be created on."#~ msgstr "选择您希望创建安装点的所有驱动器。"#~ msgid "Select an ISO to use as install source"#~ msgstr "选择一个 ISO 文件做为安装源"#~ msgid "Select an NTP server to remove"#~ msgstr "选择要移除的 NTP 服务器"#~ msgid "Select device containing the ISO file"#~ msgstr "选择含有 ISO 文件的设备"#~ msgid ""#~ "Select the device(s) you'd like to install to. They will be left "#~ "untouched until you click on the main menu's \"Begin Installation\" "#~ "button."#~ msgstr ""#~ "选择您想要将系统安装到的设备。在您点击“开始安装”按钮之前，选择的设备并不会"#~ "被操作。"#~ msgid "Selected Device"#~ msgstr "所选设备"#~ msgid ""#~ "Selected disks {} contain volume group '{}' that also uses further "#~ "unselected disks. You must select or de-select all these disks as a set."#~ msgstr ""#~ "所选择的磁盘 {} 中包括了卷组“{}”，而该卷组使用了您尚未选择的磁盘。您必须将"#~ "这些磁盘作为一个集合进行选择或者取消选择。"#~ msgid "Selected environment is not valid"#~ msgstr "所选环境无效"#~ msgid "Server must be specified as SERVER:/PATH"#~ msgstr "服务器必须以 SERVER:/PATH 的形式指定"#~ msgid "Service level"#~ msgstr "服务级别"#~ msgctxt "GUI|Subscription|Set System Purpose"#~ msgid "Set System Purpose"#~ msgstr "设置系统用途"#~ msgid "Set as current system host name."#~ msgstr "设为当前系统主机名。"#~ msgid "Set timezone"#~ msgstr "设置时区"#~ msgid "Setting up installation source..."#~ msgstr "正在设置安装源..."#~ msgid "Setting up kexec"#~ msgstr "正在设置 kexec"#~ msgid "Setting up the installation environment"#~ msgstr "正在设置安装环境"#~ msgid "Shell"#~ msgstr "Shell"#~ msgctxt "GUI|Installation Destination|Filter|NVDIMM Devices|Mode"#~ msgid "Show Only Devices in _Mode:"#~ msgstr "只显示以下模式的设备(_M)："#~ msgctxt "GUI|Installation Destination|Filter|Multipath|WWID"#~ msgid "Show Only _Devices Containing:"#~ msgstr "只显示包含以下内容的设备(_D)："#~ msgctxt "GUI|Installation Destination|Filter|Other|ID"#~ msgid "Show Only _Devices Containing:"#~ msgstr "只显示包含以下内容的设备(_D)："#~ msgctxt "GUI|Installation Destination|Filter|Multipath|Vendor"#~ msgid "Show Only _Devices From:"#~ msgstr "只显示以下来源的设备(_D)："#~ msgctxt "GUI|Installation Destination|Filter|Other|Vendor"#~ msgid "Show Only _Devices From:"#~ msgstr "只显示以下来源的设备(_D)："#~ msgctxt "GUI|Installation Destination|Filter|Multipath|Interconnect"#~ msgid "Show Only _Devices With:"#~ msgstr "只显示具有以下类型的设备(_D)："#~ msgctxt "GUI|Installation Destination|Filter|Other|Interconnect"#~ msgid "Show Only _Devices With:"#~ msgstr "只显示具有以下类型的设备(_D)："#~ msgid "Show password."#~ msgstr "显示密码。"#~ msgctxt "GUI|Custom Partitioning|Container Dialog"#~ msgid "Si_ze policy:"#~ msgstr "大小策略(Z)："#~ msgid ""#~ "Simultaneous Multithreading (SMT) may improve performance for certain "#~ "workloads, but introduces several publicly disclosed security issues. You "#~ "can disable SMT, which may impact performance. Please read https://red.ht/"#~ "rhel-smt to understand potential risks and learn about ways to mitigate "#~ "these risks."#~ msgstr ""#~ "同步多线程（SMT）技术可以为某些工作负载提供性能改进，但也会引入几个已披露"#~ "的安全问题。您可以选择禁用 SMT，但这可能会对性能造成一些影响。请参阅 "#~ "https://red.ht/rhel-smt 以了解相关的潜在风险，以及如何缓解这些风险。"#~ msgid ""#~ "Simultaneous Multithreading (SMT) technology can provide performance "#~ "improvements for certain workloads, but introduces several publicly "#~ "disclosed security issues. You have the option of disabling SMT, which "#~ "may impact performance. If you choose to leave SMT enabled, please read "#~ "https://red.ht/rhel-smt to understand your potential risks and learn "#~ "about other ways to mitigate these risks."#~ msgstr ""#~ "同步多线程（SMT）技术可以为某些工作负载提供性能改进，但也会引入几个已披露"#~ "的安全问题。您可以选择禁用 SMT，但这可能会对性能造成一些影响。如果您选择启"#~ "用 SMT，请参阅 https://red.ht/rhel-smt 以了解相关的潜在风险，以及如何缓解"#~ "这些风险。"#~ msgid "Single"#~ msgstr "单个磁盘"#~ msgid "Size cannot be decided on from kickstart nor obtained from device."#~ msgstr "无法从 kickstart 中决定大小，也无法从设备获得。"#~ msgid "Skip to shell"#~ msgstr "跳至 shell"#~ msgid "Snapshot {} already exists."#~ msgstr "快照 {} 已经存在。"#~ msgid "Snapshot: origin \"{}\" doesn't exist!"#~ msgstr "快照：源 \"{}\" 不存在！"#~ msgid ""#~ "Snapshot: origin \"{}\" of snapshot \"{}\" is not a valid thin LV device."#~ msgstr "快照：快照 \"{}\" 的源 \"{}\" 不是一个有效的瘦 LV 设备。"#~ msgid "Some of the repomd.xml files have changed or are unreachable."#~ msgstr "某些 repomd.xml 文件已更改或无法访问。"#~ msgid "Some packages, groups or modules are broken."#~ msgstr "某些软件包、组或模块已损坏。"#~ msgid "Some packages, groups or modules are missing."#~ msgstr "某些软件包、组或模块缺失。"#~ msgid "Source changed - please verify"#~ msgstr "源已更改 - 请验证"#~ msgid "Specialized & Network Disks"#~ msgstr "专用磁盘 & 网络磁盘"#~ msgid "Specify Repo Options"#~ msgstr "指定软件源选项"#~ msgctxt "GUI|Advanced User"#~ msgid "Specify a _group ID manually:"#~ msgstr "手动指定组 ID (G)："#~ msgctxt "GUI|Advanced User"#~ msgid "Specify a _user ID manually:"#~ msgstr "手动指定用户 ID (_U)："#~ msgid ""#~ "Specify the Desired Capacity in whole or decimal numbers, with an "#~ "appropriate unit.\n"#~ "\n"#~ "Spaces separating digit groups are not allowed. Units consist of a "#~ "decimal or binary prefix, and optionally the letter B. Letter case does "#~ "not matter for units. The default unit used when units are left out is "#~ "MiB.\n"#~ "\n"#~ "Examples of valid input:\n"#~ "'100 GiB' = 100 gibibytes\n"#~ "'512m' = 512 megabytes\n"#~ "'123456789' = 123 terabytes and a bit less than a half\n"#~ msgstr ""#~ "请以整数或十进制小数指定期望容量，并带上合适的单位。\n"#~ "\n"#~ "不允许以空格分隔的数字组。单位包括十进制前缀或二进制前缀，以及可选的字母 "#~ "B。单位对字母的大小写不敏感。如果省略单位，则默认的单位是 MiB。\n"#~ "\n"#~ "有效输入的例子：\n"#~ "“100GiB” = 100 Gibibytes\n"#~ "“512m” = 512 Megabytes\n"#~ "“123456789” = 123 Terabytes 再加上略少于一半的 Terabyte\n"#~ msgid "Speed"#~ msgstr "速度"#~ msgid "Start VNC"#~ msgstr "启动 VNC"#~ msgctxt "GUI|Advanced Storage|NVDIMM|Reconfigure"#~ msgid "Start _Reconfiguration"#~ msgstr "开始重新配置(_R)"#~ msgid "Start date"#~ msgstr "开始日期"#~ msgid "Start shell"#~ msgstr "启动 shell"#~ msgid "Starting VNC..."#~ msgstr "正在启动 VNC..."#~ msgid "Starting automated install"#~ msgstr "正在开始自动安装"#, python-brace-format#~ msgid "Starting pull of {branch_name} from {source}"#~ msgstr "开始从 {source} 提取 {branch_name}"#~ msgid "Status not available"#~ msgstr "状态不可用"#~ msgid "Status unknown"#~ msgstr "状态不详"#~ msgid "Status unknown (missing)"#~ msgstr "状态不详 (缺失)"#~ msgid "Storage Configuration"#~ msgstr "存储配置"#~ msgid "Storage Options"#~ msgstr "存储选项"#~ msgid "Storing configuration files and kickstarts"#~ msgstr "正在存储配置文件和 kickstarts"#~ msgid "Subscription attached."#~ msgstr "订阅已附加。"#, python-format#~ msgid "Supported formats: %s"#~ msgstr "支持的格式：%s"#~ msgid "Synchronizing writes to disk"#~ msgstr "将写入同步到磁盘"#~ msgid "System Purpose"#~ msgstr "系统用途"#~ msgid "Systemd-boot is not supported on this platform"#~ msgstr "Systemd-boot 在这个平台上不被支持"#~ msgid "TIME & DATE"#~ msgstr "时间和日期"#~ msgid "TOTAL SPACE"#~ msgstr "总空间"#~ msgid "Target"#~ msgstr "目标"#~ msgid "Target WWID"#~ msgstr "目标 WWID"#, python-brace-format#~ msgid "Target size \"{size}\" for device \"{device}\" is invalid."#~ msgstr "设备 “{device}” 的目标大小 “{size}” 无效。"#~ msgid "Team"#~ msgstr "组合"#, python-format#~ msgid "Team %(interface_name)s (%(list_of_ports)s) connected"#~ msgstr "组织 %(interface_name)s (%(list_of_ports)s) 已连接"#~ msgid "Testing layouts configuration not available."#~ msgstr "键盘配置测试不可用。"#~ msgid ""#~ "Text mode provides a limited set of installation options. It does not "#~ "offer custom partitioning for full control over the disk layout. Would "#~ "you like to use VNC mode instead?"#~ msgstr ""#~ "文本模式的安装选项有限。该模式不提供可完全控制磁盘布局的自定义分区选项。您"#~ "要使用 VNC 模式代替吗？"#~ msgid ""#~ "That mount point is already in\n"#~ "use. Try something else?"#~ msgstr ""#~ "挂载点已经\n"#~ "使用。要尝试其它挂载点吗？"#~ msgid "That mount point is already in use. Try something else?"#~ msgstr "那个挂载点已在使用中。要尝试其他挂载点吗？"#~ msgid "That mount point is invalid. Try something else?"#~ msgstr "那个挂载点无效。要尝试其他挂载点吗？"#~ msgid "The \"{}\" file system type is not supported."#~ msgstr "不支持 “{}” 文件系统类型。"#, python-format#~ msgid ""#~ "The %(product_name)s graphical installer requires %(needed_ram)s MB of "#~ "memory, but you only have %(total_ram)s MB.\n"#~ msgstr ""#~ "%(product_name)s 的图形安装程序需要 %(needed_ram)s MB 内存，但是您只有 "#~ "%(total_ram)s MB 内存。\n"#~ msgid ""#~ "The 'boot' area on your computer is where files needed\n"#~ "to start the operating system are stored."#~ msgstr ""#~ "您计算机中的 boot 区域是保存启动\n"#~ "操作系统所需文件的地方。"#~ msgid ""#~ "The 'home' area on your computer is where all your personal\n"#~ "data is stored."#~ msgstr ""#~ "您计算机中的 home 区域是保存\n"#~ "个人数据的地方。"#~ msgid ""#~ "The 'root' area on your computer is where core system\n"#~ "files and applications are stored."#~ msgstr ""#~ "您计算机中的 root 区域是保存核心\n"#~ "系统文件和应用程序的地方。"#~ msgid ""#~ "The 'swap' area on your computer is used by the operating\n"#~ "system when running low on memory."#~ msgstr ""#~ "计算机中的交换分区是供\n"#~ "操作系统在内存不足时使用的区域。"#, python-brace-format#~ msgid "The '{name}' repository has no mirror, baseurl or metalink set."#~ msgstr "'{name}' 软件仓库中没有镜像，baseurl 或元链接集。"#, python-brace-format#~ msgid "The '{name}' repository uses an unsupported protocol."#~ msgstr "'{name}' 软件仓库使用不支持的协议。"#~ msgid "The '{}' repository is invalid: {}"#~ msgstr "'{}' 软件仓库无效：{}"#~ msgid "The '{}' repository is not one of the pre-defined repositories."#~ msgstr "“{}” 软件仓库不是预定义存储库之一。"#~ msgid ""#~ "The BIOS boot partition is required to enable booting\n"#~ "from GPT-partitioned disks on BIOS hardware."#~ msgstr ""#~ "要在 BIOS 硬件上启用从 GPT 分区引导，\n"#~ "则需要有 BIOS 引导分区。"#, python-brace-format#~ msgid ""#~ "The LDL DASD disk {name} ({busid}) cannot be used for the installation. "#~ "Please format it."#~ msgstr "LDL DASD 磁盘 {name} ({busid}) 无法用于安装。请格式化它。"#~ msgid ""#~ "The PReP boot partition is required as part of the\n"#~ "boot loader configuration on some PPC platforms."#~ msgstr ""#~ "在某些 PPC 平台中的引导程序配置中，\n"#~ "需要 PReP 引导分区。"#, python-brace-format#~ msgid ""#~ "The RAID level you have selected ({level}) requires more disks ({min}) "#~ "than you currently have selected ({count})."#~ msgstr ""#~ "您选择的 RAID 级别（{level}）所需磁盘数量（最少 {min} 个）要比您当前选择的"#~ "磁盘数量 ({count}) 多。"#~ msgid "The RAID volume name \"{}\" is already in use."#~ msgstr "名为“{}”的 RAID 卷已在使用。"#~ msgid "The VNC server is now running."#~ msgstr "VNC 服务器正在运行。"#~ msgid "The added DASD can be found under \"Local Standard Disks.\""#~ msgstr "已添加的 DASD 可在“本地标准磁盘”下找到"#, python-format#~ msgid ""#~ "The available memory is less than %(size)s which can be too small for "#~ "LUKS2 format. It may fail."#~ msgstr ""#~ "可用的内存小于 %(size)s，这对于 LUKS2 格式太小了。因此可能会造成错误。"#~ msgid ""#~ "The existing unlocked LUKS device {} cannot be used for the installation "#~ "without an encryption key specified for this device. Please, rescan the "#~ "storage."#~ msgstr ""#~ "对于已有的未锁定 LUKS 设备 {}，如果未向该设备指定加密密钥，则此设备无法用"#~ "于安装。请重新扫描存储设备。"#~ msgid ""#~ "The following NVDIMM devices selected from the list will be reconfigured "#~ "to sector mode:"#~ msgstr "从列表中选择的以下 NVDIMM 设备将被重新配置为 sector 模式："#~ msgid ""#~ "The following error occurred discovering DASD devices. Please double "#~ "check your configuration information and try again."#~ msgstr "查找 DASD 设备时出现以下错误。请仔细检查您的配置信息并重试。"#~ msgid ""#~ "The following error occurred discovering iSCSI targets. Please double "#~ "check your authorization information and try again."#~ msgstr "查找 iSCSI 对象时出错。请仔细检查您的授权信息然后重试。"#~ msgid ""#~ "The following error occurred discovering zFCP devices. Please double "#~ "check your configuration information and try again."#~ msgstr "查找 zFCP 对象时出现以下错误。请仔细检查您的配置信息然后重试。"#, python-brace-format#~ msgid ""#~ "The following error occurred during the installation:\n"#~ "\n"#~ "{details}\n"#~ "\n"#~ "Would you like to ignore this and continue with installation?"#~ msgstr ""#~ "安装过程中发生以下错误。\n"#~ "\n"#~ "{details}\n"#~ "\n"#~ "要忽略该错误并继续安装吗？"#~ msgid ""#~ "The following error occurred logging into the selected iSCSI node. "#~ "Please double check your authorization information and try again."#~ msgstr "登入所选 iSCSI 节点时发生以下错误。请仔细检查您的授权信息然后重试。"#~ msgid "The following error occurred reconfiguring NVDIMM devices:"#~ msgstr "在重新配置 NVDIMM 设备时出现以下错误："#~ msgid ""#~ "The following error occurred while attempting to add an FCoE SAN. Please "#~ "check your configuration and try again"#~ msgstr "添加 FCoE SAN 时出现以下错误。请检查您的配置然后重试"#~ msgid ""#~ "The following error occurred while installing the boot loader. The system "#~ "will not be bootable. Would you like to ignore this and continue with "#~ "installation?"#~ msgstr ""#~ "安装引导装载程序时发生以下错误。系统将无法引导。要忽略该错误并继续安装吗？"#~ msgid ""#~ "The following error occurred while installing the payload. This is a "#~ "fatal error and installation will be aborted."#~ msgstr "安装负载时出现以下错误。这是个致命错误，安装将中止。"#~ msgid ""#~ "The following error occurred while setting up the payload. This is a "#~ "fatal error and installation will be aborted."#~ msgstr "设置负载时出现以下错误。这是个致命错误，安装将中止。"#~ msgid ""#~ "The following error was encountered while downloading the escrow "#~ "certificate:\n"#~ "\n"#~ "{}"#~ msgstr ""#~ "在下载托管的证书时出现以下错误：\n"#~ "\n"#~ "{}"#~ msgid ""#~ "The following errors were encountered when checking your disk selection. "#~ "You can modify your selection or quit the installer."#~ msgstr ""#~ "在检测您的磁盘选择时发生以下错误。 您可对选择进行修改或退出安装程序。"#~ msgid ""#~ "The following errors were encountered when checking your storage "#~ "configuration. You can modify your storage layout or quit the installer."#~ msgstr ""#~ "在检测您的存储配置时发生以下错误。 您可以修改存储方案或退出安装程序。"#~ msgid "The following installations were discovered on your system."#~ msgstr "在机器上中找到以下已安装的系统。"#, python-format#~ msgid ""#~ "The following nodes were discovered using the iSCSI initiator "#~ "<b>%(initiatorName)s</b> using the portal IP address "#~ "<b>%(portalAddress)s</b>. Please select which nodes you wish to log into:"#~ msgstr ""#~ "iSCSI 初始程序 <b>%(initiatorName)s</b> 使用门户 IP 地址 "#~ "<b>%(portalAddress)s</b> 时发现了以下节点。请选择您要登录的节点："#~ msgid ""#~ "The following software marked for installation has errors.\n"#~ "This is likely caused by an error with your installation source."#~ msgstr ""#~ "以下被标记为待安装的软件存在错误。\n"#~ "这很可能是安装源存在错误造成的。"#~ msgid ""#~ "The following unformatted or LDL DASDs have been detected on your system. "#~ "You can choose to format them now with dasdfmt or cancel to leave them "#~ "unformatted. Unformatted DASDs cannot be used during installation."#~ msgstr ""#~ "在您的系统中检测到以下未格式化的或 LDL DASD 设备。您现在可使用 dasdfmt 将"#~ "其格式化或取消并保持未格式化状态。未格式化的 DASD 设备不能在安装过程中使"#~ "用。"#~ msgid ""#~ "The following unformatted or LDL DASDs have been detected on your system. "#~ "You can choose to format them now with dasdfmt or cancel to leave them "#~ "unformatted. Unformatted DASDs cannot be used during installation.\n"#~ "\n"#~ msgstr ""#~ "在您的系统中检测到以下未格式化的或 LDL DASD 设备。您现在可使用 dasdfmt 将"#~ "其格式化或取消并保持其未格式化的状态。未格式化的 DASD 设备不能在安装过程中"#~ "使用。\n"#~ "\n"#~ msgid ""#~ "The following warnings were encountered when checking your kernel "#~ "configuration. These are not fatal, but you may wish to make changes to "#~ "your kernel config."#~ msgstr ""#~ "在检查您的内核配置时出现了以下警告信息。它们并不是致命的错误，但您可能会需"#~ "要修改您的内核配置。"#~ msgid ""#~ "The following warnings were encountered when checking your storage "#~ "configuration. These are not fatal, but you may wish to make changes to "#~ "your storage layout."#~ msgstr ""#~ "在检测您的存储配置时发生以下错误。虽然并不是致命错误，但您应该考虑修改存储"#~ "方案。"#~ msgid "The installation cannot continue and the system will be rebooted"#~ msgstr "安装无法继续，系统将重新启动"#, python-format#~ msgid ""#~ "The installation was stopped due to what seems to be a problem with your "#~ "hardware. The exact error message is:\n"#~ "\n"#~ "%s.\n"#~ "\n"#~ " The installer will now terminate."#~ msgstr ""#~ "似乎是由于您的硬件问题导致安装停止。具体出错信息为：\n"#~ "\n"#~ "%s。\n"#~ "\n"#~ "现在将终止安装程序。"#~ msgid "The mount point \"{}\" is not valid. It must start with a /."#~ msgstr "挂载点 “{}” 无效。必须以 / 开始。"#, python-format#~ msgid "The mount point %s must be on a linux file system."#~ msgstr "挂载点 %s 必须在 Linux 文件系统中。"#~ msgid "The passphrase is empty."#~ msgstr "密码没有设定。"#~ msgid "The passphrase is too short"#~ msgstr "密码过短"#~ msgid "The passphrase you have provided is weak."#~ msgstr "您提供的密码强度较弱。"#~ msgid "The passphrase you have provided is weak:"#~ msgstr "您提供的密码强度较弱："#~ msgid "The passphrases do not match."#~ msgstr "密码前后不匹配。"#~ msgid "The passphrases you entered were different. Please try again."#~ msgstr "您输入的密码不一致，请重试。"#~ msgid "The password cannot be more than eight characters long."#~ msgstr "密码长度不能超过 8 个字符。"#~ msgid "The password is empty."#~ msgstr "密码为空。"#~ msgid "The password is too short"#~ msgstr "密码长度太短"#~ msgid "The password must be at least six characters long."#~ msgstr "密码至少应包含六个字符。"#~ msgid "The password was set by kickstart."#~ msgstr "密码由 kickstart 设置。"#~ msgid ""#~ "The password you have provided contains non-ASCII characters. You may not "#~ "be able to switch between keyboard layouts when typing it."#~ msgstr "您设定的密码中包括非 ASCII 字符。在输入时您可能无法切换键盘布局。"#~ msgid "The password you have provided is weak."#~ msgstr "您给定的密码强度较弱。"#~ msgid "The password you have provided is weak:"#~ msgstr "您提供的密码强度较弱："#~ msgid "The passwords do not match."#~ msgstr "密码不匹配。"#~ msgid "The passwords you entered were different. Please try again."#~ msgstr "您输入的密码不一致，请重试。"#, python-format#~ msgid ""#~ "The rescue environment will now attempt to find your Linux installation "#~ "and mount it under the directory : %s. You can then make any changes "#~ "required to your system. Choose '1' to proceed with this step.\n"#~ "You can choose to mount your file systems read-only instead of read-write "#~ "by choosing '2'.\n"#~ "If for some reason this process does not work choose '3' to skip directly "#~ "to a shell.\n"#~ "\n"#~ msgstr ""#~ "救援环境现在将开始寻找您所安装的 Linux，并将它挂载到 %s 目录下。然后您便可"#~ "以对系统进行必要的更改。如果您想开始执行这一步骤，请选择“1”。\n"#~ "还可以选择“2”将文件系统挂载成“只读”模式而不是“读写”模式。\n"#~ "如果因某种原因导致此过程失败，可以选择“3”直接进入 shell。\n"#~ "\n"#~ msgid ""#~ "The root account is used for administering the system.\n"#~ "\n"#~ "The root user (also known as super user) has complete access to the "#~ "entire system. For this reason, logging into this system as the root user "#~ "is best done only to perform system maintenance or administration."#~ msgstr ""#~ "root 帐户用于管理系统。\n"#~ "\n"#~ "root 用户（也称为超级用户）具有整个系统的完整访问权限。因此，最好仅在执行"#~ "系统维护或管理时以 root 用户登录该系统。"#~ msgid "The selected disk {} is not recognized."#~ msgstr "选择的磁盘 {} 未被识别。"#~ msgid "The size \"{}\" is invalid."#~ msgstr "大小 “{}” 无效。"#~ msgid ""#~ "The software marked for installation has the following errors. This is "#~ "likely caused by an error with your installation source. You can quit "#~ "the installer, change your software source, or change your software "#~ "selections."#~ msgstr ""#~ "标记为要安装的软件存在以下错误。这可能是您的安装源错误所造成的。您可以退出"#~ "安装程序然后修改软件源，或者更改您所选择的软件。"#~ msgid ""#~ "The software marked for installation has the following warnings. These "#~ "are not fatal, but you may wish to make changes to your software "#~ "selections."#~ msgstr ""#~ "标记为要安装的软件存在以下警告。这些警告不是非常严重，但建议您更改一下您选"#~ "择的软件。"#~ msgid ""#~ "The space available to this mount point can be changed by modifying the "#~ "volume below."#~ msgstr "此挂载点的可用空间大小可通过修改下方的卷进行更改。"#~ msgid "The system has been properly subscribed"#~ msgstr "该系统已正确订阅"#~ msgid "The system is currently not registered."#~ msgstr "该系统当前还未注册。"#~ msgid ""#~ "The system will not be bootable. The firmware does not support XFS file "#~ "system features on the boot file system. Upgrade the firmware or change "#~ "the file system type."#~ msgstr ""#~ "固件不支持 boot 文件系统上的 XFS 文件系统功能。系统将无法引导。请升级固件"#~ "或更改文件系统类型。"#~ msgid "The volume group name \"{}\" is already in use."#~ msgstr "卷组名称“{}”已在使用。"#~ msgid ""#~ "There is a problem with your existing storage configuration or your "#~ "initial settings, for example a kickstart file. You must resolve this "#~ "matter before the installation can proceed. There is a shell available "#~ "for use which you can access by pressing ctrl-alt-f1 and then ctrl-b 2.\n"#~ "\n"#~ "Once you have resolved the issue you can retry the storage scan. If you "#~ "do not fix it you will have to exit the installer."#~ msgstr ""#~ "现有存储配置或您的初始化配置（例如 kickstart 文件）存在问题。您必须在安装"#~ "继续前解决该问题。可按 ctrl-alt-f1 组合键，然后按 ctrl-b 2 打开 shell 进行"#~ "修改。\n"#~ "\n"#~ "问题解决后，请再次尝试扫描存储。如果问题没有解决，则只能退出安装程序。"#~ msgid ""#~ "There is also free space available in pre-existing file systems. While "#~ "it's risky and we recommend you back up your data first, you can recover "#~ "that free disk space and make it available for this installation below."#~ msgstr ""#~ "已有的文件系统中也会存在空闲空间。由于存在风险，因此在恢复这些空闲空间前，"#~ "建议您先备份数据，之后再使用这部分空闲空间用于本次安装。"#, python-brace-format#~ msgid ""#~ "There is an entry in your /etc/fstab file that contains an invalid or "#~ "incorrect file system type. The file says that {detected_type} at "#~ "{mount_point} is {fstab_type}."#~ msgstr ""#~ "您的 /etc/fstab 文件中有一行的文件系统类型无效或不正确。文件中声称位于 "#~ "{mount_point} 的 {detected_type} 为 {fstab_type}。"#~ msgid ""#~ "There was a problem with your disk selection. Click here for details."#~ msgstr "您的磁盘选择有问题。点击此处查看详情。"#, python-format#~ msgid ""#~ "There was an error running the kickstart script at line %(lineno)s. This "#~ "is a fatal error and installation will be aborted. The details of this "#~ "error are:\n"#~ "\n"#~ "%(details)s"#~ msgstr ""#~ "运行 kickstart 脚本的 %(lineno)s 行时出错。这是一个致命错误，安装将会中"#~ "止。错误详情为：\n"#~ "\n"#~ "%(details)s"#, python-format#~ msgid ""#~ "This %(type)s device is missing member devices. You can remove it or "#~ "select a different device."#~ msgstr "该 %(type)s 设备缺少成员设备。您可将其移除或选择其它不同设备。"#, python-format#~ msgid ""#~ "This LVM Volume Group is missing %(missingPVs)d of %(totalPVs)d physical "#~ "volumes. You can remove it or select a different device."#~ msgstr ""#~ "该 LVM 卷组的 %(totalPVs)d 个物理卷中有 %(missingPVs)d 个缺失。您可以将其"#~ "移除或选择另外的设备。"#, python-format#~ msgid ""#~ "This Software RAID array is missing %(missing)d of %(total)d member "#~ "partitions. You can remove it or select a different device."#~ msgstr ""#~ "软 RAID 阵列的共 %(total)d 个成员分区中有 %(missing)d 个缺失。您可以将其移"#~ "除或选择另外的设备。"#~ msgid ""#~ "This device cannot be edited directly. You can remove it or select a "#~ "different device."#~ msgstr "此设备无法直接编辑。您可以将其移除或选择其它设备。"#~ msgid "This device contains the installation source."#~ msgstr "该设备包含安装源。"#~ msgid ""#~ "This device is encrypted and cannot be read without a valid passphrase. "#~ "You may unlock it below."#~ msgstr "此设备已加密，如果没有密码不能读取。您可在下方解锁。"#~ msgid "This field is optional."#~ msgstr "该字段为可选项。"#~ msgid "This file system may not be resized."#~ msgstr "该文件系统可能无法重新定义大小。"#~ msgid "This is unstable, pre-release software."#~ msgstr "这是一个不稳定的预发布软件。"#~ msgid "This may take a moment."#~ msgstr "这可能需要些时间。"#~ msgid ""#~ "This may take a moment. You may <a href=\"\">go back to the main menu</a> "#~ "to complete other installation options while formatting completes."#~ msgstr ""#~ "这可能需要些时间。在格式化完成前，您可<a href=\"\">返回到主菜单</a>完成其"#~ "他安装选项。"#~ msgctxt "GUI|Software Source|Media Check Dialog"#~ msgid "This media is good to install from."#~ msgstr "此介质正常，可用于安装。"#~ msgctxt "GUI|Software Source|Media Check Dialog"#~ msgid "This media is not good to install from."#~ msgstr "无法使用此介质安装。"#, python-format#~ msgid ""#~ "This mount point is invalid. The %s directory must be on the / file "#~ "system."#~ msgstr "此挂载点无效。%s 目录必须位于 / 文件系统。"#~ msgid "Time settings"#~ msgstr "时间设置"#~ msgid "Timezone is not set."#~ msgstr "时区未设置。"#~ msgid "Timezone settings"#~ msgstr "时区设置"#, python-format#~ msgid "Timezone: %s\n"#~ msgstr "时区：%s\n"#~ msgid "Tip:"#~ msgstr "提示："#~ msgid "To access the Red Hat CDN, a valid Red Hat subscription is required."#~ msgstr "要访问 Red Hat CDN，需要有效的 Red Hat CDN 订阅。"#~ msgid "To use DASD disks, you must provide the device number."#~ msgstr "要使用 DASD 磁盘，您必须提供该设备的编号。"#~ msgid ""#~ "To use iSCSI disks, you must provide the address of your iSCSI target and "#~ "the iSCSI initiator name you've configured for your host."#~ msgstr ""#~ "要使用 iSCSI 磁盘，您必须提供 iSCSI 目标的地址以及您主机上配置的 iSCSI 发"#~ "起者的名称。"#~ msgid ""#~ "To use zFCP-attached SCSI disks, you must provide the FCP device number. "#~ "Storage WWPN and FCP LUN are necessary if the zFCP adapter is not "#~ "configured in NPIV mode or when automatic LUN scanning is disabled via a "#~ "kernel module parameter."#~ msgstr ""#~ "要使用zFCP连接的SCSI磁盘，你必须提供FCP设备号。如果zFCP适配卡没有配置为"#~ "NPIV模式，或者通过内核模块参数禁用自动LUN扫描时，存储WWPN和FCP LUN是必须"#~ "的。"#~ msgid "Too short"#~ msgstr "过短"#, python-format#~ msgid "Total selected space to reclaim: <b>%s</b>"#~ msgstr "总共选择的要回收空间大小：<b>%s</b>"#~ msgid ""#~ "Tried to use undefined partition \"{}\" in Btrfs volume specification."#~ msgstr "已尝试按 Btrfs 卷的标准使用未定义分区“{}”。"#~ msgid "Tried to use undefined partition \"{}\" in RAID specification."#~ msgstr "已尝试按 RAID 标准使用未定义分区“{}”。"#~ msgid ""#~ "Tried to use undefined partition \"{}\" in Volume Group specification"#~ msgstr "已尝试在卷组规格中使用未定义分区 “{}”"#~ msgid "Type here to search."#~ msgstr "在这里进行搜索。"#~ msgid "UNFORMATTED DASDS"#~ msgstr "未格式化的 DASD"#~ msgctxt "GUI|Software Source"#~ msgid "URL _type:"#~ msgstr "URL 类型 (_T)："#~ msgid "URL has no host component"#~ msgstr "URL 中没有主机部分"#~ msgid "URL is empty"#~ msgstr "未填写 URL"#~ msgid "URL of the repository"#~ msgstr "软件 URL 名称"#~ msgctxt "GUI|Software Source"#~ msgid "URL type:"#~ msgstr "URL 类型："#~ msgid "USER SETTINGS"#~ msgstr "用户设置"#~ msgid "Unable to create PID file"#~ msgstr "无法创建 PID 文件"#~ msgid "Unable to encrypt password: unsupported algorithm {}"#~ msgstr "无法加密密码：不支持的算法 {}"#~ msgid "Unable to find /bin/bash to execute! Not starting shell."#~ msgstr "未找到 /bin/bash 来运行！不会启动 shell。"#~ msgid "Unacceptable label format for file system."#~ msgstr "不可接受的文件系统标签格式。"#~ msgid "Unavailable"#~ msgstr "不可用"#~ msgid "Unformatted DASDs Detected"#~ msgstr "检测到未格式化的 DASD"#~ msgid "Unknown"#~ msgstr "未知"#~ msgid "Unknown name of the %addon section."#~ msgstr "%addon 小节的名称未知。"#~ msgid "Unknown or invalid device '{}' specified"#~ msgstr "指定了未知或无效的设备 '{}'"#~ msgid "Unknown or invalid format '{}' specified for device '{}'"#~ msgstr "为设备 \"{}\" 指定的格式 \"{}\" 未知或者无效"#~ msgctxt "GUI|Network"#~ msgid "Unloc_k"#~ msgstr "解除锁定(_K)"#~ msgid "Unmanaged"#~ msgstr "未管理"#~ msgid "Unregistering..."#~ msgstr "正在取消注册……"#~ msgid "Unregistration failed."#~ msgstr "反注册失败。"#~ msgid "Unsupported"#~ msgstr "不支持"#~ msgid "Updates"#~ msgstr "更新"#~ msgid "Usage"#~ msgstr "用途"#~ msgid "Usage: {}"#~ msgstr "用途: {}"#~ msgid "Use All Space"#~ msgstr "使用全部空间"#~ msgid "Use HTTP proxy"#~ msgstr "使用 HTTP 代理"#~ msgid "Use Network Time"#~ msgstr "使用网络时间"#~ msgctxt "GUI|Advanced Storage|FCoE"#~ msgid "Use _DCB"#~ msgstr "使用 _DCB"#~ msgctxt "GUI|Advanced Storage|FCoE"#~ msgid "Use auto _VLAN"#~ msgstr "使用自动 VLAN(V)"#, python-format#~ msgid "Use of this product is subject to the license agreement found at %s"#~ msgstr "使用本产品需要遵守此许可协议 %s"#~ msgid "Use of this product is subject to the license agreement found at:"#~ msgstr "使用本产品需要遵守以下许可协议："#~ msgid "Use password"#~ msgstr "使用密码"#~ msgid "Use text mode"#~ msgstr "使用文本模式"#~ msgid "Use the credentials from discovery"#~ msgstr "使用来自发现的凭据"#~ msgid "User Name"#~ msgstr "用户名"#~ msgctxt "GUI|Software Source|Proxy Dialog"#~ msgid "User _name:"#~ msgstr "用户名(_N)："#~ msgid "User and Group IDs"#~ msgstr "用户和组 ID"#~ msgid "User name: "#~ msgstr "用户名： "#~ msgid "VLAN"#~ msgstr "VLAN"#, python-format#~ msgid "VLAN %(interface_name)s (%(parent_device)s, ID %(vlanid)s) connected"#~ msgstr "VLAN %(interface_name)s (%(parent_device)s, ID %(vlanid)s) 已连接"#~ msgid "VLAN ID"#~ msgstr "VLAN ID"#~ msgid "VNC"#~ msgstr "VNC"#~ msgid "VNC Password"#~ msgstr "VNC 密码"#~ msgid ""#~ "VNC password must be six to eight characters long.\n"#~ "Please enter a new one, or leave blank for no password."#~ msgstr ""#~ "VNC 密码长度必须是 6 到 8 个字符。\n"#~ "请输入新密码，或留空保持无密码。"#~ msgid "VPN Type"#~ msgstr "VPN 类型"#~ msgid "Vendor"#~ msgstr "厂商"#~ msgctxt "GUI|Software Source|Media Check Dialog"#~ msgid "Verification finished."#~ msgstr "验证完毕。"#~ msgctxt "GUI|Software Source|Media Check Dialog"#~ msgid "Verifying media, please wait..."#~ msgstr "正在效验介质，请等待..."#~ msgid "Volume"#~ msgstr "卷"#~ msgid "Volume Group"#~ msgstr "卷组"#~ msgid ""#~ "Volume group \"{}\" defined without any physical volumes. Either specify "#~ "physical volumes or use --useexisting."#~ msgstr ""#~ "卷组“{}”的定义中没有任何物理卷。请指定物理卷，或者用 --useexisting 选项。"#~ msgid "Volume group \"{}\" given in volgroup command does not exist."#~ msgstr "volgroup 命令中指定的卷组“{}”不存在。"#~ msgid ""#~ "Volume group given physical extent size of \"{}\", but must be one of:\n"#~ "{}."#~ msgstr ""#~ "卷组指定了物理大小“{}”，但它的数值必须是以下值之一：\n"#~ "{}。"#~ msgid "WELCOME"#~ msgstr "欢迎"#, python-format#~ msgid "WELCOME TO %(name)s %(version)s."#~ msgstr "欢迎使用 %(name)s %(version)s。"#~ msgid "WEP"#~ msgstr "WEP"#~ msgid "WPA"#~ msgstr "WPA"#~ msgid "WPA2"#~ msgstr "WPA2"#~ msgid "WWID"#~ msgstr "WWID"#~ msgid "WWPN"#~ msgstr "WWPN"#~ msgid "WWPN:"#~ msgstr "WWPN："#, python-format#~ msgid "Waiting for %s threads to finish"#~ msgstr "正在等待 %s 个线程结束"#~ msgid ""#~ "Warning checking software dependencies. <a href=\"\">Click for details.</"#~ "a>"#~ msgstr "警告 检查软件依赖关系。<a href=\"\">点击查看详情。</a>"#~ msgid "Warning checking software selection"#~ msgstr "警告 检查软件选择"#~ msgid "Warning checking storage configuration"#~ msgstr "警告，正在检查存储配置"#~ msgid ""#~ "Warning checking storage configuration. <a href=\"\">Click for details.</"#~ "a>"#~ msgstr "检查存储设置时报警。<a href=\"\">点击查看详情。</a>"#~ msgid ""#~ "Warning checking storage configuration. <a href=\"\">Click for details</"#~ "a> or press Done again to continue."#~ msgstr ""#~ "检查存储配置时出现警告。<a href=\"\">点击查看详情</a>或再次按完成按钮继"#~ "续。"#~ msgid ""#~ "Warning checking storage configuration. <a href=\"\">Click for details</"#~ "a> or press Done again to continue."#~ msgstr ""#~ "检查存储配置时出现警告。<a href=\"\">点击查看详情</a>或再次按完成按钮继"#~ "续。"#~ msgid ""#~ "Warning: All storage changes made using the installer will be lost when "#~ "you choose to format.\n"#~ "\n"#~ "Proceed to run dasdfmt?\n"#~ msgstr ""#~ "警告：选择格式化后，所有使用安装程序生成的存储变更都将会丢失。\n"#~ "\n"#~ "要执行 dasdfmt 吗？\n"#~ msgid "Warning: Existing data on reconfigured devices will be lost."#~ msgstr "警告：重新配置的设备上存在的数据将会丢失。"#~ msgid "Warning: Processor has Simultaneous Multithreading (SMT) enabled"#~ msgstr "警告：处理器启用了同步多线程（SMT）"#~ msgid ""#~ "Warning: Processor has Simultaneous Multithreading (SMT) enabled. <a "#~ "href=\"\">Click for details.</a>"#~ msgstr ""#~ "警告：处理器启用了同步多线程（SMT）。<a href=\"\">点击查看更多细节。</a>"#~ msgid ""#~ "Warning: This will revert all changes done so far.\n"#~ "Do you want to proceed?\n"#~ msgstr ""#~ "警告：此操作将取消截至当前的所有操作。\n"#~ "您要继续吗？\n"#~ msgid ""#~ "Warning: You won't be able to switch between keyboard layouts (from the "#~ "default one) when you decrypt your disks after install."#~ msgstr ""#~ "警告：安装完成后，当您对磁盘进行解密时，您将无法在不同的键盘布局之间切换"#~ "（从默认键盘布局切换到其他键盘布局）。"#~ msgid "We won't touch your disks until you click 'Begin Installation'."#~ msgstr "在点击“开始安装”按钮前我们并不会操作您的磁盘。"#~ msgid ""#~ "We'll need network access to fetch information about your location and to "#~ "make software updates available for you."#~ msgstr "我们需要访问网络来获取有关您位置的信息，并向您提供可用的软件更新。"#~ msgid "What language would you like to use during the installation process?"#~ msgstr "您在安装过程中想使用哪种语言？"#~ msgid ""#~ "When finished, please exit from the shell and your system will reboot.\n"#~ msgstr "完成后，请退出 shell，系统将会重新启动。\n"#, python-format#~ msgid ""#~ "When you create mount points for your %(name)s %(version)s installation, "#~ "you'll be able to view their details here."#~ msgstr ""#~ "在您为 %(name)s %(version)s 安装创建挂载点后，您可在这里浏览它们的详细信"#~ "息。"#~ msgid ""#~ "Which combination(s) would you prefer for switching between keyboard "#~ "layouts?"#~ msgstr "您更喜欢使用哪一种组合键进行键盘布局切换？"#~ msgid "Which installation source would you like to use?"#~ msgstr "您要使用哪个安装源？"#~ msgid ""#~ "Which keyboard layouts would you like to use on this system? You may "#~ "move any layout to the top of the list to select it as the default."#~ msgstr ""#~ "您想在本系统中使用哪个键盘布局？您可以将任意布局移动到顶部将其作为默认选"#~ "项。"#~ msgid "Wi-Fi Networks"#~ msgstr "Wi-Fi 网络"#~ msgid "Will try to connect again in 15 seconds..."#~ msgstr "在 15 秒后尝试重新连接..."#, python-format#~ msgid "Wired (%(interface_name)s) connected"#~ msgstr "有线（%(interface_name)s）已连接"#, python-format#~ msgid "Wired (%(interface_name)s) connected\n"#~ msgstr "有线（%(interface_name)s）已连接\n"#, python-format#~ msgid "Wired (%(interface_name)s) disconnected\n"#~ msgstr "有线（%(interface_name)s）已断开\n"#~ msgid "Wireless"#~ msgstr "无线"#, python-format#~ msgid "Wireless connected to %(access_point)s"#~ msgstr "无线已连接至 %(access_point)s"#~ msgid ""#~ "Workarounds for manual installations:\n"#~ "* Select only the disks with the same sector size during manual "#~ "installation in graphical or text mode.\n"#~ "* When disks with inconsistent sector size are selected for the "#~ "installation, restrict each created LVM Volume Group to use Physical "#~ "Volumes with the same sector size. This can only be done in graphical "#~ "mode in the Custom partitioning spoke.\n"#~ "\n"#~ "Workarounds for kickstart installations:\n"#~ "* Restrict what disks are used for the partitioning by specifying "#~ "'ignoredisk --drives=..' or 'ignoredisk --only-use=..'.\n"#~ "* Specify what disks should be used for each created LVM Physical Volume: "#~ "'partition pv.1 --ondisk=..'.\n"#~ "\n"#~ "General workarounds:\n"#~ "* Plain partitioning scheme can be used instead of LVM.\n"#~ "* Some drives support re-configuration of sector sizes, for example by "#~ "running 'hdparm --set-sector-size=<SIZE> <DEVICE>'.\n"#~ msgstr ""#~ "手工安装的临时解决方案：\n"#~ "* 在图形模式或文本模式的手工安装期间，只选择带有相同扇区大小的磁盘。\n"#~ "* 如果选项了扇区大小不一致的磁盘进行安装，限制每个创建的 LVM 卷组使用带有"#~ "相同扇区大小的物理卷。这只能在自定义分区的图形模式中进行。\n"#~ "\n"#~ "kickstart 安装的临时解决方案：\n"#~ "* 通过指定 'ignoredisk --drives=..' 或 'ignoredisk --only-use=..' 来限制使"#~ "用用于分区的磁盘。\n"#~ "* 指定对于每个创建的 LVM 物理卷应使用的磁盘：partition pv.1 --"#~ "ondisk=..'.\n"#~ "\n"#~ "一般的临时解决方案：\n"#~ "* 使用一般的分区方案而不是使用 LVM。\n"#~ "* 一些驱动器支持重新配置扇区大小，例如通过运行 'hdparm --set-sector-"#~ "size=<SIZE> <DEVICE>'。\n"#~ msgid "Working"#~ msgstr "可以工作"#~ msgid "Writing network configuration"#~ msgstr "正写入网络配置"#~ msgid "Writing objects"#~ msgstr "写入对象"#~ msgid ""#~ "X was unable to start on your machine. Would you like to start VNC to "#~ "connect to this computer from another computer and perform a graphical "#~ "installation or continue with a text mode installation?"#~ msgstr ""#~ "计算机无法启动 X。您想用其他计算机通过 VNC 来连接该计算机并进行图形化安装"#~ "吗？或者继续以文本模式安装？"#~ msgid ""#~ "You can remove existing file systems you no longer need to free up space "#~ "for this installation. Removing a file system will permanently delete "#~ "all of the data it contains."#~ msgstr ""#~ "您可以移除不使用的文件系统来释放空间以便进行安装。移除文件系统将会永久地删"#~ "除其中的数据。"#~ msgid ""#~ "You can remove or insert additional disks at this time and press 'Rescan "#~ "Disks' below for the changes to take effect."#~ msgstr ""#~ "您现在可以移除或插入其它硬盘然后按下方的“重新扫描硬盘”，让更改生效。"#~ msgid "You don't have any Linux partitions.\n"#~ msgstr "没有任何 Linux 分区。\n"#~ msgid ""#~ "You have chosen to encrypt some of your data. You will need to create a "#~ "passphrase that you will use to access your data when you start your "#~ "computer."#~ msgstr ""#~ "您已选择加密您的部分数据。您将需要创建一个密码，用于在计算机启动后访问您的"#~ "数据。"#~ msgid ""#~ "You have chosen to skip boot loader installation. Your system may not be "#~ "bootable."#~ msgstr "您选择了跳过引导加载程序安装。系统可能无法引导。"#~ msgid "You have no working NTP server configured"#~ msgstr "您还没有配置有效的 NTP 服务器"#~ msgid "You have not created a bootable partition."#~ msgstr "您还未创建可引导的分区。"#, python-format#~ msgid ""#~ "You have not defined a root partition (/), which is required for "#~ "installation of %s to continue."#~ msgstr "您还没有指定继续安装 %s 所必需的根分区 (/)。"#, python-format#~ msgid ""#~ "You have not specified a swap partition. %(requiredMem)s of memory is "#~ "recommended to continue installation without a swap partition, but you "#~ "only have %(installedMem)s."#~ msgstr ""#~ "您尚未指定 swap 分区。在没有 swap 分区时，安装需要 %(requiredMem)s 的内存"#~ "才能继续，但您的计算机当前只有 %(installedMem)s 内存。"#, python-format#~ msgid ""#~ "You have not specified a swap partition. %(requiredMem)s of memory is "#~ "required to continue installation without a swap partition, but you only "#~ "have %(installedMem)s."#~ msgstr ""#~ "您尚未指定 swap 分区。在没有 swap 分区时，安装需要 %(requiredMem)s 的内存"#~ "才能继续，但您的计算机当前只有 %(installedMem)s 内存。"#, python-format#~ msgid ""#~ "You haven't created any mount points for your %(product)s %(version)s "#~ "installation yet. You can:"#~ msgstr "您还没有为 %(product)s %(version)s 的安装创建任何挂载点。您可以："#~ msgid ""#~ "You may <a href=\"\">go back to the main menu</a> to complete other\n"#~ "installation options while this scan completes."#~ msgstr ""#~ "当扫描结束后您可以<a href=\"\">回到主菜单</a>\n"#~ "完成其它安装选项。"#~ msgid "You may add a keyboard layout by selecting it below:"#~ msgstr "您可从以下键盘布局中选择一个添加："#~ msgid ""#~ "You may input a comma-separated list of group names and group IDs here. "#~ "Groups that do not already exist will be created; specify their GID in "#~ "parentheses. "#~ msgstr ""#~ "您可以用英文逗号做为分隔符在此输入多个组名以及组 ID。不存在的组将会被创"#~ "建；在括起来英文括号中指定这些组的 GID。 "#~ msgid "You must create a new file system on the root device."#~ msgstr "您必须在根设备上创建新文件系统。"#~ msgid ""#~ "You must include a PReP Boot Partition within the first 4GiB of an MBR- "#~ "or GPT-formatted disk."#~ msgstr "必须在 MBR 或 GPT 格式的磁盘前 4GiB 中包括一个 PReP 引导分区。"#~ msgid ""#~ "You must include an Apple Bootstrap Partition on an Apple Partition Map-"#~ "formatted disk."#~ msgstr ""#~ "在使用 Apple 分区表格式化的磁盘上必须包括一个 Apple Bootstrap 分区。"#~ msgid ""#~ "You must include at least one MBR- or DASD-formatted disk as an install "#~ "target."#~ msgstr "必须包括至少一个 MBR 或 DASD 格式的磁盘作为安装目标。"#~ msgid ""#~ "You must include at least one MBR- or GPT-formatted disk as an install "#~ "target."#~ msgstr "必须包括至少一个 MBR 或 GPT 格式的磁盘作为安装目标。"#~ msgid ""#~ "You must include at least one MBR-formatted disk as an install target."#~ msgstr "必须包括至少一个 MBR 格式的磁盘作为安装目标。"#~ msgid "You must include at least one disk as an install target."#~ msgstr "您必须选择至少一个磁盘作为安装目标。"#~ msgid "You must set a password"#~ msgstr "您必须设置密码"#~ msgid "You need to set up networking first if you want to use NTP"#~ msgstr "如果您要使用 NTP，需要首先设置网络"#, python-format#~ msgid ""#~ "You selected disk %(selected)s, which contains devices that also use "#~ "unselected disk %(unselected)s. You must select or de-select these disks "#~ "as a set."#~ msgid_plural ""#~ "You selected disk %(selected)s, which contains devices that also use "#~ "unselected disks %(unselected)s. You must select or de-select these disks "#~ "as a set."#~ msgstr[0] ""#~ "您所选择的磁盘 %(selected)s 中包括有一些设备，而这些设备还使用了您未选择的"#~ "磁盘 %(unselected)s。您必须将这些磁盘作为一个整体进行选择或者取消选择它"#~ "们。"#~ msgid "You will have to press <b>Done</b> twice to confirm it."#~ msgstr "必须按两次<b>完成</b>按钮进行确认。"#~ msgid "You'll set a passphrase next."#~ msgstr "接下来您将设置密码。"#, python-format#~ msgid ""#~ "Your %(mount)s partition is less than %(size)s which is lower than "#~ "recommended for a normal %(productName)s install."#~ msgstr ""#~ "您的 %(mount)s 分区小于 %(size)s MB，小于正常安装 %(productName)s 的建议"#~ "值。"#, python-format#~ msgid ""#~ "Your %(mount)s partition is too large for %(format)s formatting "#~ "(allowable size is %(minSize)s to %(maxSize)s)"#~ msgstr ""#~ "您的 %(mount)s 分区太大，无法用 %(format)s 格式化（允许大小为 %(minSize)s "#~ "到 %(maxSize)s）"#, python-format#~ msgid ""#~ "Your %(mount)s partition is too small for %(format)s formatting "#~ "(allowable size is %(minSize)s to %(maxSize)s)"#~ msgstr ""#~ "您的 %(mount)s 分区太小，无法用 %(format)s 格式化（允许大小为 %(minSize)s "#~ "到 %(maxSize)s）"#, python-format#~ msgid "Your %(mount)s partition size is lower than required %(size)s."#~ msgstr "您的 %(mount)s 分区大小小于要求的大小 %(size)s。"#, python-format#~ msgid "Your %s must be on a separate partition or LV."#~ msgstr "您的 %s 必须位于单独的分区或 LV 上。"#~ msgid ""#~ "Your BIOS-based system needs a special partition to boot from a GPT disk "#~ "label. To continue, please create a 1MiB 'biosboot' type partition on the "#~ "{} disk."#~ msgstr ""#~ "您的计算机是基于 BIOS 的计算机，因此系统需要一个特殊分区以便从 GPT 磁盘标"#~ "签引导。要继续，请在 {} 磁盘上创建一个 1MB 的”biosboot“分区。"#, python-format#~ msgid ""#~ "Your current <a href=\"\" title=\"%(tooltip)s\"><b>%(product)s</b> "#~ "software selection</a> requires <b>%(total)s</b> of available space, "#~ "including <b>%(software)s</b> for software and <b>%(swap)s</b> for swap "#~ "space."#~ msgstr ""#~ "您当前的 <a href=\"\" title=\"%(tooltip)s\"><b>%(product)s</b>软件选择</a>"#~ "需要 <b>%(total)s</b> 的可用空间，这其中包括用于软件的 <b>%(software)s</"#~ "b> 和用于 swap 的 <b>%(swap)s</b>。"#, python-format#~ msgid ""#~ "Your current <b>%(product)s</b> software selection requires <b>%(total)s</"#~ "b> of available space, including <b>%(software)s</b> for software and "#~ "<b>%(swap)s</b> for swap space."#~ msgstr ""#~ "您当前 <b>%(product)s</b> 的软件选择总共需要 <b>%(total)s</b> 的可用空间，"#~ "这其中包括用于软件的 <b>%(software)s</b> 和用于 swap 的 <b>%(swap)s</b>。"#~ msgid ""#~ "Your customizations will result in the following changes taking effect "#~ "after you return to the main menu and begin installation:"#~ msgstr ""#~ "您的自定义更改将产生以下变更，这些变更将会在您返回到主菜单并开始安装时生"#~ "效："#, python-format#~ msgid "Your root partition must be on a device of type: %s."#~ msgstr "您的根分区必须位于如下设备类型的设备上：%s。"#, python-format#~ msgid ""#~ "Your system has been mounted under %(mountpoint)s.\n"#~ "\n"#~ "If you would like to make the root of your system the root of the active "#~ "system, run the command:\n"#~ "\n"#~ "\tchroot %(mountpoint)s\n"#~ "\n"#~ msgstr ""#~ "您的系统已挂载到 %(mountpoint)s。\n"#~ "\n"#~ "如果希望将该系统的根目录设置为当前活动系统的根目录，运行以下命令：\n"#~ "\n"#~ "\tchroot %(mountpoint)s\n"#~ "\n"#~ msgctxt "GUI|Summary Dialog"#~ msgid "_Accept Changes"#~ msgstr "接受更改(_A)"#~ msgctxt "GUI|Keyboard Layout|Add Layout"#~ msgid "_Add"#~ msgstr "添加(_A)"#~ msgctxt "GUI|Network|Add Device Dialog"#~ msgid "_Add"#~ msgstr "添加(_A)"#~ msgctxt "GUI|Advanced Storage|FCoE"#~ msgid "_Add FCoE Disk(s)"#~ msgstr "添加 FCoE 磁盘(_A)"#~ msgctxt "GUI|Storage"#~ msgid "_Add a disk..."#~ msgstr "添加磁盘(_A)..."#~ msgctxt "GUI|Custom Partitioning|Add Dialog"#~ msgid "_Add mount point"#~ msgstr "添加挂载点(_A)"#~ msgctxt "GUI|Advanced User"#~ msgid "_Add user to the following groups:"#~ msgstr "将用户添加到以下的组中(_A)："#~ msgctxt "GUI|Installation Destination|Filter"#~ msgid "_Add zFCP LUN..."#~ msgstr "添加 zFCP LUN(_A)..."#~ msgctxt "GUI|User"#~ msgid "_Advanced..."#~ msgstr "高级(_A)..."#~ msgctxt "GUI|Network|Hostname"#~ msgid "_Apply"#~ msgstr "应用(_A)"#~ msgctxt "GUI|Software Source"#~ msgid "_Auto-detected installation media:"#~ msgstr "自动检测到的安装介质(_A)："#~ msgctxt "GUI|Summary"#~ msgid "_Begin Installation"#~ msgstr "开始安装(_B)"#~ msgctxt "GUI|Advanced Storage|iSCSI|Configure"#~ msgid "_Bind targets to network interfaces This may take a moment..."#~ msgstr "将目标绑定至网络接口(_B)。可能会需要一些时间..."#~ msgctxt "GUI|Spoke"#~ msgid "_Blivet-GUI Partitioning"#~ msgstr "Blivet-GUI 分区（B）"#~ msgctxt "GUI|Installation Destination|Filter|zSeries|CCW"#~ msgid "_CCW:"#~ msgstr "CCW（C）："#~ msgctxt "GUI|Advanced Storage|DASD|Configure"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Advanced Storage|FCoE"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Advanced Storage|NVDIMM|Reconfigure"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Advanced Storage|iSCSI|Configure"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Advanced User"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Custom Partitioning|Add Dialog"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Custom Partitioning|Configure Dialog"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Custom Partitioning|Confirm Delete Dialog"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Custom Partitioning|Container Dialog"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|DAD Format Dialog"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Date and Time|NTP"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Detailed Error Dialog"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Keyboard Layout|Add Layout"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Keyboard Layout|Switching Options"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Network|Add Device Dialog"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Network|Authentication Dialog"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Network|Wireless|Configure"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Network|Wireless|Select Network Dialog"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Passphrase Dialog"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Reclaim Dialog"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Refresh Dialog|Rescan"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Software Source|ISO Chooser Dialog"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Software Source|Media Check Dialog"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Software Source|Proxy Dialog"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Storage|No Space Dialog"#~ msgid "_Cancel"#~ msgstr "取消(_C)"#~ msgctxt "GUI|Summary Dialog"#~ msgid "_Cancel & Return to Custom Partitioning"#~ msgstr "取消并返回到自定义分区(_C)"#~ msgctxt "GUI|Storage|Need Space Dialog"#~ msgid "_Cancel & add more disks"#~ msgstr "取消并添加更多磁盘(_C)"#~ msgctxt "GUI|Software Source"#~ msgid "_Choose an ISO"#~ msgstr "选择 ISO (_C)"#~ msgctxt "GUI|Date and Time"#~ msgid "_City:"#~ msgstr "城市(_C)："#~ msgctxt "GUI|Custom Partitioning|Autopart Page"#~ msgid "_Click here to create them automatically."#~ msgstr "点击这里自动创建它们(_C)。"#~ msgctxt "GUI|Selected Disks Dialog"#~ msgid "_Close"#~ msgstr "关闭(_C)"#~ msgctxt "GUI|Network|Proxy"#~ msgid "_Configuration URL"#~ msgstr "配置 URL(_C)"#~ msgctxt "GUI|Network|Mobile Broadband"#~ msgid "_Configure..."#~ msgstr "配置(_C)..."#~ msgctxt "GUI|Network|VPN"#~ msgid "_Configure..."#~ msgstr "配置(_C)..."#~ msgctxt "GUI|Network|Wired"#~ msgid "_Configure..."#~ msgstr "配置(_C)..."#~ msgctxt "GUI|Network|Wireless"#~ msgid "_Configure..."#~ msgstr "配置(_C)..."#~ msgctxt "GUI|User"#~ msgid "_Confirm password"#~ msgstr "确认密码(_C)"#~ msgctxt "GUI|Password"#~ msgid "_Confirm:"#~ msgstr "确认(_C)："#~ msgctxt "GUI|Spoke"#~ msgid "_Connect to Red Hat"#~ msgstr "_连接到红帽"#~ msgctxt "GUI|Standalone Navigation"#~ msgid "_Continue"#~ msgstr "继续(_C)"#~ msgctxt "GUI|Storage"#~ msgid "_Custom"#~ msgstr "自定义(_C)"#~ msgctxt "GUI|Reclaim Dialog"#~ msgid "_Delete"#~ msgstr "删除(_D)"#~ msgctxt "GUI|Custom Partitioning|Confirm Delete Dialog"#~ msgid "_Delete It"#~ msgstr "删除(_D)"#~ msgctxt "GUI|Advanced Storage|DASD|Configure"#~ msgid "_Device number:"#~ msgstr "设备编号(_D)："#~ msgctxt "GUI|Advanced Storage|zFCP|Device Number"#~ msgid "_Device number:"#~ msgstr "设备编号(_D)："#~ msgctxt "GUI|Custom Partitioning"#~ msgid "_Discard All Changes"#~ msgstr "放弃所有更改(_D)"#~ msgctxt "GUI|Advanced Storage|iSCSI|Configure"#~ msgid "_Discovery Authentication Type:"#~ msgstr "查找认证类型(_D)："#~ msgctxt "GUI|Selected Disks Dialog"#~ msgid "_Do not install boot loader"#~ msgstr "不安装引导程序(_D)"#~ msgctxt "GUI|Spoke Navigation"#~ msgid "_Done"#~ msgstr "完成(_D)"#~ msgctxt "GUI|Software Source|Proxy Dialog"#~ msgid "_Enable HTTP Proxy"#~ msgstr "启用 HTTP 代理(_E)"#~ msgctxt "GUI|Custom Partitioning|Configure"#~ msgid "_Encrypt"#~ msgstr "加密(_E)"#~ msgctxt "GUI|Custom Partitioning|Autopart Page"#~ msgid "_Encrypt automatically created mount points by default:"#~ msgstr "自动地加密默认创建的挂载点(_E)："#~ msgctxt "GUI|Storage"#~ msgid "_Encrypt my data."#~ msgstr "加密我的数据(_E)。"#~ msgctxt "GUI|Error Dialog"#~ msgid "_Exit Installer"#~ msgstr "退出安装程序(_E)"#~ msgctxt "GUI|Storage Detailed Error Dialog"#~ msgid "_Exit Installer"#~ msgstr "退出安装程序(_E)"#~ msgctxt "GUI|Network|Proxy"#~ msgid "_FTP Proxy"#~ msgstr "_FTP 代理"#~ msgctxt "GUI|Progress"#~ msgid "_Finish Installation"#~ msgstr "完成安装(_F)"#~ msgctxt "GUI|DAD Format Dialog"#~ msgid "_Format with dasdfmt"#~ msgstr "使用 dasdfmt 格式化(_F)"#~ msgctxt "GUI|Storage"#~ msgid "_Full disk summary and boot loader..."#~ msgstr "完整磁盘摘要以及引导程序(_F)..."#~ msgctxt "GUI|User"#~ msgid "_Full name"#~ msgstr "全名(_F)"#~ msgctxt "GUI|Network"#~ msgid "_Host Name:"#~ msgstr "主机名(_H)："#~ msgctxt "GUI|Spoke"#~ msgid "_Installation Destination"#~ msgstr "安装目标位置(_I)"#~ msgctxt "GUI|Spoke"#~ msgid "_Installation Source"#~ msgstr "安装源(_I)"#~ msgctxt "GUI|Network|Secrets Dialog"#~ msgid "_Key:"#~ msgstr "密钥(_K)："#~ msgctxt "GUI|Spoke"#~ msgid "_Keyboard"#~ msgstr "键盘(_K)"#~ msgctxt "GUI|Installation Destination|Filter|Search|Port Target LUN"#~ msgid "_LUN:"#~ msgstr "LUN（L）："#~ msgctxt "GUI|Installation Destination|Filter|zSeries|LUN"#~ msgid "_LUN:"#~ msgstr "LUN（L）："#~ msgctxt "GUI|Custom Partitioning|Configure|Devices"#~ msgid "_Label:"#~ msgstr "标签(_L)："#~ msgctxt "GUI|Spoke"#~ msgid "_Language Support"#~ msgstr "语言支持（_L）"#~ msgctxt "GUI|Network|Proxy"#~ msgid "_Method"#~ msgstr "模式(_M)"#~ msgctxt "GUI|Storage|Error Dialog"#~ msgid "_Modify Disk Selection"#~ msgstr "修改磁盘选择(_M)"#~ msgctxt "GUI|Software Selection|Error Dialog"#~ msgid "_Modify Software Source"#~ msgstr "修改软件源(_M)"#~ msgctxt "GUI|Storage|Error Dialog"#~ msgid "_Modify Storage Layout"#~ msgstr "修改存储布局(_M)"#~ msgctxt "GUI|Custom Partitioning|Configure"#~ msgid "_Modify..."#~ msgstr "修改(_M)..."#~ msgctxt "GUI|Custom Partitioning|Configure|Devices"#~ msgid "_Modify..."#~ msgstr "修改(_M)..."#~ msgctxt "GUI|Software Source"#~ msgid "_Mount options:"#~ msgstr "挂载选项 (_M)："#~ msgctxt "GUI|Installation Destination|Filter"#~ msgid "_Multipath Devices"#~ msgstr "多路径设备(_M)"#~ msgctxt "GUI|Advanced Storage|FCoE"#~ msgid "_NIC:"#~ msgstr "网卡(_N)："#~ msgctxt "GUI|Installation Destination|Filter"#~ msgid "_NVDIMM Devices"#~ msgstr "NVDIMM 设备（N）"#~ msgctxt "GUI|Custom Partitioning|Configure|Devices"#~ msgid "_Name:"#~ msgstr "名称(_N)："#~ msgctxt "GUI|Custom Partitioning|Container Dialog"#~ msgid "_Name:"#~ msgstr "名称(_N)："#~ msgctxt "GUI|Software Source"#~ msgid "_Name:"#~ msgstr "名称(_N)："#~ msgctxt "GUI|Installation Destination|Filter|NVDIMM Devices|Namespace"#~ msgid "_Namespace:"#~ msgstr "命名空间(_N)："#~ msgctxt "GUI|Spoke"#~ msgid "_Network & Host Name"#~ msgstr "网络和主机名(_N)"#~ msgctxt "GUI|Date and Time"#~ msgid "_Network Time"#~ msgstr "网络时间(_N)"#~ msgctxt "GUI|Custom Partitioning|Autopart Page"#~ msgid "_New mount points will use the following partitioning scheme:"#~ msgstr "新挂载点将使用以下分区方案(_N)："#~ msgctxt "GUI|Main"#~ msgid "_No"#~ msgstr "否(_N)"#~ msgctxt "GUI|Yes No Dialog"#~ msgid "_No"#~ msgstr "否(_N)"#~ msgctxt "GUI|Advanced Storage|iSCSI|Login"#~ msgid "_Node Login Authentication Type:"#~ msgstr "节点登录认证类型(_N)："#~ msgctxt "GUI|Advanced Storage|DASD|Configure"#~ msgid "_OK"#~ msgstr "确定(_O)"#~ msgctxt "GUI|Advanced Storage|iSCSI|Configure"#~ msgid "_OK"#~ msgstr "确定(_O)"#~ msgctxt "GUI|DAD Format Dialog"#~ msgid "_OK"#~ msgstr "确定(_O)"#~ msgctxt "GUI|Date and Time|NTP"#~ msgid "_OK"#~ msgstr "确定(_O)"#~ msgctxt "GUI|Keyboard Layout|Switching Options"#~ msgid "_OK"#~ msgstr "确定(_O)"#~ msgctxt "GUI|Refresh Dialog|Rescan"#~ msgid "_OK"#~ msgstr "确定(_O)"#~ msgctxt "GUI|Software Selection|Warning Dialog"#~ msgid "_OK"#~ msgstr "确定(_O)"#~ msgctxt "GUI|Software Source|Proxy Dialog"#~ msgid "_OK"#~ msgstr "确定(_O)"#~ msgctxt "GUI|Storage|Warning Dialog"#~ msgid "_OK"#~ msgstr "确定(_O)"#~ msgctxt "GUI|Summary|Warning Dialog"#~ msgid "_OK"#~ msgstr "确定(_O)"#~ msgctxt "GUI|Software Source"#~ msgid "_On the network:"#~ msgstr "在网络上(_O)："#~ msgctxt "GUI|Software Source|ISO Chooser Dialog"#~ msgid "_Open"#~ msgstr "打开(_O)"#~ msgctxt "GUI|Keyboard Layout"#~ msgid "_Options"#~ msgstr "选项(_O)"#~ msgctxt "GUI|Installation Destination|Filter"#~ msgid "_Other SAN Devices"#~ msgstr "其他 SAN 设备(_O)"#~ msgctxt "GUI|Custom Partitioning|Encrypted"#~ msgid "_Passphrase:"#~ msgstr "密码(_P)："#~ msgctxt "GUI|Passphrase Dialog"#~ msgid "_Passphrase:"#~ msgstr "密码(_P)："#~ msgctxt "GUI|User"#~ msgid "_Password"#~ msgstr "密码(_P)"#~ msgctxt "GUI|Network|Secrets Dialog"#~ msgid "_Password:"#~ msgstr "密码(_P)："#~ msgctxt "GUI|Software Source"#~ msgid "_Path:"#~ msgstr "路径 (_P)："#~ msgctxt "GUI|Installation Destination|Filter|Search|Port Target LUN"#~ msgid "_Port:"#~ msgstr "端口(_P)："#~ msgctxt "GUI|Reclaim Dialog"#~ msgid "_Preserve"#~ msgstr "保留(_P)"#~ msgctxt "GUI|Custom Partitioning|Reset Dialog"#~ msgid "_Preserve current selections"#~ msgstr "保留当前选项(_P)"#~ msgctxt "GUI|Keyboard Layout"#~ msgid "_Preview layout"#~ msgstr "预览布局(_P)"#~ msgctxt "GUI|Software Source|Proxy Dialog"#~ msgid "_Proxy Host:"#~ msgstr "代理设置(_P)："#~ msgctxt "GUI|Software Source"#~ msgid "_Proxy setup..."#~ msgstr "代理设置(_P)..."#~ msgctxt "GUI|Detailed Error Dialog"#~ msgid "_Quit"#~ msgstr "退出(_Q)"#~ msgctxt "GUI|Software Selection|Error Dialog"#~ msgid "_Quit"#~ msgstr "退出(_Q)"#~ msgctxt "GUI|Standalone Navigation"#~ msgid "_Quit"#~ msgstr "退出(_Q)"#~ msgctxt "GUI|Storage|Error Dialog"#~ msgid "_Quit"#~ msgstr "退出(_Q)"#~ msgctxt "GUI|Summary"#~ msgid "_Quit"#~ msgstr "退出(_Q)"#~ msgctxt "GUI|Storage|No Space Dialog"#~ msgid "_Quit installer"#~ msgstr "退出安装程序(_Q)"#~ msgctxt "GUI|Progress"#~ msgid "_Reboot System"#~ msgstr "重启系统(_R)"#~ msgctxt "GUI|Storage|Need Space Dialog"#~ msgid "_Reclaim space"#~ msgstr "回收空间(_R)"#~ msgctxt "GUI|Storage"#~ msgid "_Refresh..."#~ msgstr "刷新(_R)..."#~ msgctxt "GUI|Date and Time"#~ msgid "_Region:"#~ msgstr "地区(_R)："#~ msgctxt "GUI|Subscription|Register"#~ msgid "_Register"#~ msgstr "注册(_R)"#~ msgctxt "GUI|Selected Disks Dialog"#~ msgid "_Remove"#~ msgstr "删除(_R)"#~ msgctxt "GUI|Software Source"#~ msgid "_Remove"#~ msgstr "删除(_R)"#~ msgctxt "GUI|Keyboard Layout"#~ msgid "_Remove layout"#~ msgstr "删除布局(_R)"#~ msgctxt "GUI|User"#~ msgid "_Require a password to use this account"#~ msgstr "需要密码才能使用该帐户(_R)"#~ msgctxt "GUI|Refresh Dialog|Rescan"#~ msgid "_Rescan Disks"#~ msgstr "重新扫描磁盘(_R)"#~ msgctxt "GUI|Blivet Gui Partitioning"#~ msgid "_Reset All"#~ msgstr "全部重设(_R)"#~ msgctxt "GUI|Custom Partitioning|Reset Dialog"#~ msgid "_Reset selections"#~ msgstr "重设分区方案(_R)"#~ msgctxt "GUI|Storage Detailed Error Dialog"#~ msgid "_Retry"#~ msgstr "重试(_R)"#~ msgctxt "GUI|Advanced Storage|DASD|Configure"#~ msgid "_Retry Discovery"#~ msgstr "重试查找(_R)"#~ msgctxt "GUI|Advanced Storage|iSCSI|Configure|Retry"#~ msgid "_Retry Discovery"#~ msgstr "重试查找(_R)"#~ msgctxt "GUI|Advanced Storage|zFCP|Retry Discovery"#~ msgid "_Retry Discovery"#~ msgstr "重试查找(_R)"#~ msgctxt "GUI|Advanced Storage|iSCSI|Login|Reverse CHAP"#~ msgid "_Reverse CHAP User name:"#~ msgstr "逆向 CHAP 用户名(_R)："#~ msgctxt "GUI|Password"#~ msgid "_Root Password:"#~ msgstr "Root 密码(_R)："#~ msgctxt "GUI|Passphrase Dialog"#~ msgid "_Save Passphrase"#~ msgstr "保存密码(_S)"#~ msgctxt "GUI|Advanced Storage|NVDIMM|Reconfigure"#~ msgid "_Sector size:"#~ msgstr "Sector 大小 (_S)："#~ msgctxt "GUI|Network|Wireless"#~ msgid "_Select network"#~ msgstr "选择网络(_S)"#~ msgctxt "GUI|Network|Add Device Dialog"#~ msgid "_Select the type of device you wish to add"#~ msgstr "选择您要添加设备的类型(_S)"#~ msgctxt "GUI|Selected Disks Dialog"#~ msgid "_Set as Boot Device"#~ msgstr "设为 Boot 设备 (_S)"#~ msgctxt "GUI|Reclaim Dialog"#~ msgid "_Shrink"#~ msgstr "缩小(_S)"#~ msgctxt "GUI|Network|Proxy"#~ msgid "_Socks Host"#~ msgstr "Socks 主机 (_S)"#~ msgctxt "GUI|Spoke"#~ msgid "_Software Selection"#~ msgstr "软件选择（S）"#~ msgctxt "GUI|Software Source"#~ msgid "_Source:"#~ msgstr "来源 (_S)："#~ msgctxt "GUI|Advanced Storage|DASD|Configure"#~ msgid "_Start Discovery"#~ msgstr "开始查找(_S)"#~ msgctxt "GUI|Advanced Storage|iSCSI|Configure|Start"#~ msgid "_Start Discovery"#~ msgstr "开始查找(_S)"#~ msgctxt "GUI|Advanced Storage|zFCP|Start Discovery"#~ msgid "_Start Discovery"#~ msgstr "开始查找(_S)"#~ msgctxt "GUI|Network|Wireless"#~ msgid "_Stop Hotspot..."#~ msgstr "停用热点(_S)..."#~ msgctxt "GUI|Advanced Storage|iSCSI|Configure"#~ msgid "_Target IP Address:"#~ msgstr "对象的 IP 地址(_T)："#~ msgctxt "GUI|Installation Destination|Filter|Search|Port Target LUN"#~ msgid "_Target:"#~ msgstr "目标(_T)："#~ msgctxt "GUI|Keyboard Layout"#~ msgid "_Test the layout configuration below:"#~ msgstr "测试下方的布局配置(_T)："#~ msgctxt "GUI|Spoke"#~ msgid "_Time & Date"#~ msgstr "时间和日期(_T)"#~ msgctxt "GUI|Software Source"#~ msgid "_URL:"#~ msgstr "URL (_U)："#~ msgctxt "GUI|Custom Partitioning|Encrypted"#~ msgid "_Unlock"#~ msgstr "解锁(_U)"#~ msgctxt "GUI|Subscription|Unregister"#~ msgid "_Unregister"#~ msgstr "反注册(_U)"#~ msgctxt "GUI|Custom Partitioning|Configure|Devices"#~ msgid "_Update Settings"#~ msgstr "更新设置(_U)"#~ msgctxt "GUI|Software Source|Proxy Dialog"#~ msgid "_Use Authentication"#~ msgstr "使用认证(_U)"#~ msgctxt "GUI|Network|Wireless"#~ msgid "_Use as Hotspot..."#~ msgstr "做为热点使用(_U)..."#~ msgctxt "GUI|Spoke"#~ msgid "_User Creation"#~ msgstr "创建用户(_U)"#~ msgctxt "GUI|User"#~ msgid "_User name"#~ msgstr "用户名(_U)"#~ msgctxt "GUI|Software Source"#~ msgid "_Verify"#~ msgstr "验证(V)"#~ msgctxt "GUI|Custom Partitioning|Configure"#~ msgid "_Volume Group:"#~ msgstr "卷组(V)："#~ msgctxt "GUI|Custom Partitioning|Configure|Devices"#~ msgid "_Volume Group:"#~ msgstr "卷组(V)："#~ msgctxt "GUI|Custom Partitioning|Configure|Devices"#~ msgid "_Volume:"#~ msgstr "卷(V)："#~ msgctxt "GUI|Installation Destination|Filter|Search|WWID"#~ msgid "_WWID:"#~ msgstr "WWID（W）："#~ msgctxt "GUI|Installation Destination|Filter|zSeries|WWPN"#~ msgid "_WWPN:"#~ msgstr "WWPN（W）："#~ msgctxt "GUI|Main"#~ msgid "_Yes"#~ msgstr "是(Y)"#~ msgctxt "GUI|Yes No Dialog"#~ msgid "_Yes"#~ msgstr "是(Y)"#~ msgctxt "GUI|Installation Destination|Filter"#~ msgid "_zSeries Devices"#~ msgstr "zSeries 设备(_Z)"#, python-format#~ msgid ""#~ "boot loader stage2 device %(stage2dev)s is on a multi-disk array, but "#~ "boot loader stage1 device %(stage1dev)s is not part of this array. The "#~ "stage1 boot loader will only be installed to a single drive."#~ msgstr ""#~ "引导加载程序阶段2设备 %(stage2dev)s 位于多磁盘阵列上，而引导加载程序阶段1"#~ "设备 %(stage1dev)s 不是该阵列的一部分。阶段1引导加载程序只能安装到单个磁盘"#~ "上。"#, python-format#~ msgid ""#~ "boot loader stage2 device %(stage2dev)s is on a multi-disk array, but "#~ "boot loader stage1 device %(stage1dev)s is not. A drive failure in "#~ "%(stage2dev)s could render the system unbootable."#~ msgstr ""#~ "引导加载程序阶段2设备 %(stage2dev)s 位于多磁盘阵列上，而引导加载程序设备1 "#~ "%(stage1dev)s 不在该阵列中。%(stage2dev)s 中的驱动器故障可能导致系统无法启"#~ "动。"#~ msgid ""#~ "bootctl failed to install UEFI boot loader. More information may be found "#~ "in the log files stored in /tmp"#~ msgstr ""#~ "bootctl 无法安装 UEFI 引导加载程序。 更多信息可以在 /tmp 中存储的日志文件"#~ "中找到"#~ msgid "checking status"#~ msgstr "正在检查状态"#~ msgid "container"#~ msgstr "容器"#~ msgctxt "GUI|Custom Partitioning|Configure|Devices"#~ msgid "container"#~ msgstr "容器"#~ msgid "disk free"#~ msgstr "可用磁盘"#~ msgid "empty password"#~ msgstr "空密码"#~ msgid "fs free"#~ msgstr "可用空间"#~ msgid "hostname:port"#~ msgstr "主机名:端口"#~ msgid "http:// or https:// or ftp://"#~ msgstr "http:// 或 https:// 或 ftp://"#~ msgctxt "GUI|Advanced Storage|iSCSI|Configure"#~ msgid "iSCSI _Initiator Name:"#~ msgstr "iSCSI 发起程序名称(_I)："#~ msgid ""#~ "iscsi --iface must be specified (binding used) either for all targets or "#~ "for none"#~ msgstr "iscsi --iface 必须为所有目标指定 (使用 binding)，或全部都不指定"#~ msgid "key1,key2,..."#~ msgstr "密钥1,密钥2,..."#~ msgid "local ISO file"#~ msgstr "本地 ISO 文件"#~ msgid "logvol --noformat must also use the --name= option."#~ msgstr "logvol --noformat 必须同时使用 --name= 选项。"#~ msgid "malformed URL, cannot parse it."#~ msgstr "异常 URL，无法解析。"#~ msgid "metalink"#~ msgstr "元链接"#~ msgid "mirrorlist"#~ msgstr "镜像列表"#~ msgid "none"#~ msgstr "无"#~ msgid "not configured"#~ msgstr "未配置"#~ msgid "not set"#~ msgstr "未设置"#~ msgid "part --noformat must also use the --onpart option."#~ msgstr "part --noformat 必须同时使用 --onpart 选项。"#~ msgid "product name unknown"#~ msgstr "产品名称未知"#~ msgid "raid --noformat must also use the --device option."#~ msgstr "raid --noformat 必须同时使用 --device 选项。"#~ msgid "repository URL"#~ msgstr "软件库 URL"#~ msgid "status: not working"#~ msgstr "状态：未工作"#~ msgid "status: working"#~ msgstr "状态：工作中"#~ msgid "summary"#~ msgstr "小结"#~ msgid "testing status..."#~ msgstr "正在测试状态..."#~ msgid "to begin installation"#~ msgstr "开始安装"#, python-format#~ msgid "to enter the %(spoke_title)s spoke"#~ msgstr "进入 %(spoke_title)s 分部"#~ msgid "to go back to region list"#~ msgstr "返回到地区列表"#~ msgid "to return to language list"#~ msgstr "返回语言列表"#~ msgid "unknown"#~ msgstr "未知"#~ msgid "unplugged"#~ msgstr "被拔出"#~ msgid ""#~ "volgroup --noformat and volgroup --useexisting must also use the --name= "#~ "option."#~ msgstr ""#~ "volgroup --noformat 和 volgroup --useexisting 都必须同时使用 --name= 选"#~ "项。"#~ msgid "wheel, my-team (1245), project-x (29935)"#~ msgstr "wheel, my-team (1245), project-x (29935)"#~ msgid "zFCP"#~ msgstr "zFCP"#, python-brace-format#~ msgid "{count} disk selected; {capacity} capacity; {free} free"#~ msgid_plural "{count} disks selected; {capacity} capacity; {free} free"#~ msgstr[0] "已选择 {count} 个磁盘；容量 {capacity}；{free} 空闲"#, python-brace-format#~ msgid "{device_description} ({device_name})"#~ msgstr "{device_description} ({device_name})"#, python-brace-format#~ msgid "{device_name} on {container_name}"#~ msgstr "{container_name} 中的 {device_name}"#, python-brace-format#~ msgid "{fs} must be on a device of type {type}"#~ msgstr "{fs} 必须位于 {type} 类型的设备上"#, python-brace-format#~ msgid "{product} Linux {version} for {arch}"#~ msgstr "面向 {arch} 架构的 {product} Linux {version}"#, python-brace-format#~ msgid "{product} {version} for {arch}"#~ msgstr "面向 {arch} 架构的 {product} {version}"#~ msgctxt "GUI|Installation Destination|Filter"#~ msgid "{} _storage device selected"#~ msgid_plural "{} _storage devices selected"#~ msgstr[0] "已选择 {} 个存储设备(_S)"#~ msgid "{} cannot be encrypted"#~ msgstr "{} 无法被加密"#~ msgid "{} consumed"#~ msgstr "{} 已使用"#~ msgid "{} free"#~ msgstr "{} 空闲"#~ msgid ""#~ "{} may be a system boot partition! Deleting it may break other operating "#~ "systems. Are you sure you want to delete it?"#~ msgstr ""#~ "{} 可能是系统的引导分区！删除此分区可能会破坏其它系统。确定要删除吗？"#~ msgid "{} mounted as {}"#~ msgstr "{} 挂载为 {}"#~ msgid "{} subscriptions attached to the system"#~ msgstr "已附加 {} 项订阅至此系统"#~ msgid "{}. {}"#~ msgstr "{}。{}"#~ msgid "Verifying {}"#~ msgstr "正在验证 {}"#~ msgid "/boot/efi must be on a EFI System Partition device"#~ msgstr "/boot/efi 必须在 EFI 系统分区设备上"#~ msgid "Incorrect passphrase"#~ msgstr "密码不正确"#~ msgid "Some LUKS devices were not unlocked"#~ msgstr "部分 LUKS 设备未解锁"#~ msgid "There is not enough available free space to install. "#~ msgstr "没有足够的可用空间来安装。 "#~ msgid "There is not enough space on the disks to install. "#~ msgstr "磁盘上没有足够的空间来安装。 "#~ msgid ""#~ "This option requires that the selected device has formatted partitions."#~ msgstr "此选项要求所选设备已格式化分区。"#~ msgid "To enable free up disk space"#~ msgstr "启用释放磁盘空间"#~ msgid "To enable select bigger disks"#~ msgstr "启用选择更大的磁盘"#~ msgid "Please attach the file /tmp/webui.log to the issue."#~ msgstr "请将文件 /tmp/webui.log 附加到问题中。"#~ msgid "No existing partitions on the selected disks."#~ msgstr "所选磁盘上没有现有分区。"#~ msgid "Starting Install to Hard Drive"#~ msgstr "开始安装到硬盘"#, fuzzy#~| msgid "Action"#~ msgid "Action: $0"#~ msgstr "操作"#, fuzzy#~| msgid "Error"#~ msgid "Error: $0"#~ msgstr "错误"#~ msgid "Not Now"#~ msgstr "不是现在"#~ msgid ""#~ "There is not enough available free space to install. The installation "#~ "needs $1 of available disk space; however, only $0 is currently available "#~ "on the selected disks."#~ msgstr ""#~ "没有足够的可用空间来安装。 安装需要 $1 的可用磁盘空间； 但是，当前所选磁盘"#~ "上只有 $0 可用。"#~ msgid ""#~ "This live media can be used to install Fedora or as a temporary system. "#~ "Installation can be started at any time using the install icon in "#~ "Activities."#~ msgstr ""#~ "该实时媒体可用于安装 Fedora 或作为临时系统。 可以随时使用“活动”中的安装图"#~ "标开始安装。"#~ msgid "Welcome to Fedora!"#~ msgstr "欢迎使用 Fedora！"#~ msgid "reformat"#~ msgstr "重新格式化"#~ msgid "4k"#~ msgstr "4k"#~ msgid "64k"#~ msgstr "64k"#~ msgid "Kernel Options"#~ msgstr "内核选项"#~ msgid "Kernel options"#~ msgstr "内核选项"#~ msgid "More efficient memory usage in smaller environments"#~ msgstr "在较小的环境中更有效地使用内存"#~ msgid "System performance gains for memory-intensive workloads"#~ msgstr "内存密集型工作负载的系统性能提升"#~ msgid "Failed to unlock LUKS partition"#~ msgstr "解锁 LUKS 分区失败"#~ msgid "Unlock encrypted partition $0"#~ msgstr "解锁加密分区 $0"#~ msgid "You need to unlock encrypted partitions before you can continue."#~ msgstr "您需要先解锁加密分区，然后才能继续。"#, fuzzy#~| msgctxt "GUI|Custom Partitioning|Add Dialog"#~| msgid "_Add mount point"#~ msgid "Custom mount point"#~ msgstr "添加挂载点(_A)"#~ msgid "Downloading package metadata..."#~ msgstr "正在下载软件包元数据......"#~ msgid "Starting package installation process"#~ msgstr "启动软件包安装进程"#~ msgid ""#~ " button to view and configure the local storage devices connected after "#~ "starting the installation process."#~ msgstr " 按钮以在开始安装过程后查看和配置连接的本地存储设备。"#~ msgid "Available storage capacity on the disk."#~ msgstr "磁盘上的可用存储容量。"#~ msgid "Checking disks"#~ msgstr "检查磁盘"#~ msgid "Detect disks"#~ msgstr "检测磁盘"#~ msgid "Detecting disks"#~ msgstr "正在检测磁盘"#~ msgid ""#~ "In Installation destination, you can configure disks to be used as the "#~ "installation target. You must select a minimum of 1 disk for the "#~ "installation process to proceed."#~ msgstr ""#~ "在安装目标中，您可以配置磁盘以用作安装目标。 您必须选择至少1个磁盘才能继续"#~ "进行安装程序。"#~ msgid "Installation destination"#~ msgstr "安装目标位置"#~ msgid "Local disks label info"#~ msgstr "本地磁盘标签信息"#~ msgid "Local standard disk"#~ msgstr "本地标准磁盘"#~ msgid "Local standard disks"#~ msgstr "本地标准磁盘"#~ msgid ""#~ "Locally available storage devices (SATA, NVMe SSD, SCSI hard drives, "#~ "external disks, etc.)"#~ msgstr "本地可用的存储设备（SATA、NVMe SSD、SCSI硬盘、外部磁盘等）"#~ msgid "Scans for local storage devices"#~ msgstr "扫描本地存储设备"#~ msgid "Select multiple disks"#~ msgstr "选择多个磁盘"#~ msgid "Select no disk"#~ msgstr "选择无磁盘"#~ msgid ""#~ "Select the device(s) to install to. The installation requires $0 of "#~ "available space. Storage will be automatically partitioned."#~ msgstr "选择要安装的设备。安装需要 $0 的可用空间。存储将被自动分区。"#~ msgid ""#~ "The installer determines the total amount of space on all selected disks, "#~ "and creates a Btrfs layout suitable for your system. The specifics of "#~ "this layout depend on whether your system uses BIOS or UEFI firmware and "#~ "the total free space on disks. A ZRAM-based swap is used instead of a "#~ "disk-based swap partition."#~ msgstr ""#~ "安装程序确定所有选定磁盘上的空间总数，并创建适合您系统的 Btrfs 布局。 该布"#~ "局的细节取决于您的系统是否使用BIOS或UEFI固件以及磁盘上的总自由空间。 使用"#~ "基于 ZRAM 的交换代替基于磁盘的交换分区。"#~ msgid "Total"#~ msgstr "总计"#~ msgid "Try Fedora"#~ msgstr "试用 Fedora"#~ msgid "Use the "#~ msgstr "使用 "#~ msgid ""#~ "Use the Detect disks button to view and configure the local storage "#~ "devices connected after starting the installation process."#~ msgstr "开始安装过程后，使用检测磁盘按钮查看和配置连接的本地存储设备。"#~ msgid "Welcome to the Anaconda installer"#~ msgstr "欢迎使用 Anaconda 安装程序"#~ msgid ""#~ "You are currently running Fedora from live media.\n"#~ "You can install Fedora now, or choose \"Install to Hard Drive\" in the "#~ "Activities Overview at any later time."#~ msgstr ""#~ "您目前正在通过免安装介质运行 Fedora。\n"#~ "您现在就可以安装 Fedora，也可以在稍后通过选择活动概览中的 “安装到硬盘” 来"#~ "进行安装。"#~ msgid ""#~ "You can choose \"Install to Hard Drive\"\n"#~ "in the Activities Overview at any later time."#~ msgstr ""#~ "您可以在稍后任何时候通过选择活动概览中的 “安装到硬盘” \n"#~ "来进行安装。"#~ msgid "total"#~ msgstr "总计"#~ msgctxt "GUI|Software Source"#~ msgid "D_evice:"#~ msgstr "设备(_E)："#~ msgctxt "GUI|Software Source"#~ msgid "_ISO file:"#~ msgstr "_ISO 文件："#~ msgid ""#~ "All locally available storage devices (SATA, IDE and SCSI hard drives, "#~ "USB flash drives, etc.) are displayed in the Local Standard Disks "#~ "section. Local disks are detected when the installer starts - any storage "#~ "devices connected after the installation has started will not be shown."#~ msgstr ""#~ "所有本地可用的存储设备（SATA、IDE 和 SCSI 硬盘、USB 闪存驱动器等）都显示在"#~ "本地标准磁盘部分。本地磁盘在安装程序启动时被检测到 - 任何在安装开始后连接"#~ "的存储设备都不会被显示。"#~ msgid ""#~ "If you need to configure additional local storage devices, refresh the "#~ "device list using the Detect disks button. All detected disks, including "#~ "any new ones, will be displayed in the Local Standard Disks section."#~ msgstr ""#~ "如果您需要配置其他本地存储设备，请使用“检测磁盘”按钮刷新设备列表。 所有检"#~ "测到的磁盘，包括任何新磁盘，都将显示在本地标准磁盘部分中。"#~ msgid "Failed to set up installation source; check the repo url"#~ msgstr "设置安装源失败，请查看源 url"#~ msgid "Error setting up software source"#~ msgstr "设置软件源时出错"#~ msgid ""#~ "Failed to set up installation source; check the repo url and proxy "#~ "settings."#~ msgstr "设置安装源失败，请检查源 url 和代理设置。"#~ msgid "Repository %s has empty url"#~ msgstr "软件仓库 %s url 为空"#~ msgid "Repository %s does not match selected protocol"#~ msgstr "软件仓库 %s 与所选协议不匹配"#~ msgid "Repository %s has empty NFS server"#~ msgstr "软件仓库 %s NFS 服务器为空"#~ msgid ""#~ "Repository %s has invalid NFS server, exactly one colon ':' must be "#~ "present between host and directory"#~ msgstr "软件仓库 %s 的 NFS 服务器地址无效，端口和目录间必须要有一个\":\""#~ msgid "Repository %s has invalid host name"#~ msgstr "软件仓库 %s 主机名无效"#~ msgid "Repository %s required remote directory"#~ msgstr "软件仓库 %s 需要远程目录"#~ msgid "URL for the repository, without protocol."#~ msgstr "不带协议前缀的软件仓库 URL。"#~ msgid "URL of proxy in the form of protocol://host:[port]"#~ msgstr "代理 URL，格式为 protocol://host:[port]"#~ msgid "Optional proxy user name."#~ msgstr "可选代理用户名。"#~ msgid "Optional proxy password."#~ msgstr "可选代理密码。"#~ msgid "Protocol for the repository URL."#~ msgstr "软件仓库 URL 协议。"#~ msgctxt "GUI|Software Source"#~ msgid "U_ser name:"#~ msgstr "用户名(_S)："#~ msgctxt "GUI|Software Source"#~ msgid "Pass_word:"#~ msgstr "密码(_W)："#~ msgid "Select one or more disks this device may reside on."#~ msgstr "选择此设备所驻留的一个或多个磁盘。"#~ msgid "Payload installation"#~ msgstr "有效负载安装"#~ msgid "Boot loader installation"#~ msgstr "安装引导程序"#~ msgid "Discover disks"#~ msgstr "发现磁盘"#~ msgid ""#~ "Select the language you would like to use. This language will also be "#~ "selected for your installed system."#~ msgstr "选择您要使用的语言。该语言也会成为您系统的默认语言。"#~ msgid "Selected disks will be erased at install"#~ msgstr "选定的磁盘将在安装时被擦除"#~ msgid "$0 (of $1) disk selected"#~ msgid_plural "$0 (of $1) disks selected"#~ msgstr[0] "选择了 $0(共 $1个) 个磁盘"#~ msgid "Failed to set up installation source"#~ msgstr "设置安装源失败"#~ msgid "Error downloading package metadata"#~ msgstr "下载软件包元数据时出错"#~ msgid ""#~ "The {} section has been deprecated. It may be removed from future "#~ "releases, which will result in a fatal error when it is encountered. "#~ "Please modify your kickstart file to remove this section."#~ msgstr ""#~ "{} 部分已弃用。安装过程中如遇此部分，则会导致致命错误，后续发行版本中会将"#~ "其移除。请修改您的 kickstart 文件，将此部分从中删除。"#~ msgid ""#~ "To use zFCP disks, you must provide the device number, WWPN, and LUN "#~ "configured for the device."#~ msgstr "要使用 zFCP 磁盘，您必须提供配置该设备的设备编号、WWPN，以及 LUN。"#~ msgid "Hide logs"#~ msgstr "隐藏日志"#~ msgid "Show logs"#~ msgstr "显示日志"#~ msgid ""#~ "You have not specified a swap partition. Although not strictly required "#~ "in all cases, it will significantly improve performance for most "#~ "installations."#~ msgstr ""#~ "你尚未指定交换 (swap) 分区。虽然并非在所有情况下都需要，但在大多数情况会显"#~ "著提高系统性能。"#~ msgid "Select the language you would like to use."#~ msgstr "选择您要使用的语言。"#~ msgid ""#~ "Fedora is successfully installed. To begin using it, reboot your system."#~ msgstr "Fedora 已成功安装。重启后即可使用。"#~ msgid "Installation progress"#~ msgstr "安装进度"#~ msgid "Review"#~ msgstr "回顾"#~ msgid "Installation language"#~ msgstr "安装语言"#~ msgid ""#~ "Select the device(s) you would like to install to. They will be left "#~ "untouched until you click on the main menu's 'Begin installation' button."#~ msgstr ""#~ "选择您想要将系统安装到的设备。在您点击“开始安装”按钮之前，选择的设备并不会"#~ "被操作。"#~ msgid "PRE-RELEASE/TESTING"#~ msgstr "预发布/测试"#~ msgid "Installation summary"#~ msgstr "安装概要"#~ msgid "Language support"#~ msgstr "语言支持"#~ msgid "Time & Date"#~ msgstr "时间和日期"#~ msgid "Software Selection"#~ msgstr "软件选择"#~ msgid "Network & Host name"#~ msgstr "网络和主机名"#~ msgid ""#~ "Please complete items marked with this icon before continuing to the next "#~ "step"#~ msgstr "请先完成带有此图标标记的内容再进行下一步"#~ msgid "We won't touch your disks until you click 'Begin installation'"#~ msgstr "在点击“开始安装”按钮前我们并不会操作您的磁盘"#~ msgid "Network time"#~ msgstr "网络时间"#~ msgid "Use network time"#~ msgstr "使用网络时间"#~ msgid "Confirm root password"#~ msgstr "确认 root 用户密码"#~ msgid "Network & Host Name"#~ msgstr "网络和主机名"#~ msgid "Done"#~ msgstr "完成"#~ msgid ""#~ "The %packages --ignorebroken feature is not supported on your product!"#~ msgstr "您的产品不支持 %packages --ignorebroken 特性！"#~ msgctxt "GUI|Storage"#~ msgid "I would like to _make additional space available."#~ msgstr "我想让额外空间可用(_M)。"#~ msgid "Unsupported Hardware Detected"#~ msgstr "检测到不支持的硬件"#~ msgid ""#~ "Support for this hardware has been removed in this major OS release. "#~ "Please check the removed functionality section of the release notes."#~ msgstr ""#~ "此主发行版本中已删除对此硬件的支持。请查阅发行注记中“已删除功能”部分中的内"#~ "容。"#~ msgid ""#~ "This hardware (or a combination thereof) is not supported by Red Hat. For "#~ "more information on supported hardware, please refer to http://"#~ "www.redhat.com/hardware."#~ msgstr ""#~ "红帽尚不支持该硬件(或其组合)。欲了解受支持的硬件信息，请访问 http://"#~ "www.redhat.com/hardware。"#~ msgctxt "GUI|Welcome|Unsupported Hardware Dialog"#~ msgid "_Quit"#~ msgstr "退出(_Q)"#~ msgctxt "GUI|Welcome|Unsupported Hardware Dialog"#~ msgid "_Continue"#~ msgstr "继续(_C)"#~ msgid "Unsupported Hardware"#~ msgstr "不受支持的硬件"#~ msgid "Installing %(flatpak_name)s"#~ msgstr "正在安装 %(flatpak_name)s"#~ msgid "Disabled. Set password to enable root account."#~ msgstr "禁用的，设置密码以启用 root 帐号。"#~ msgid "Root account is disabled."#~ msgstr "root 账户已禁用。"#~ msgid "Password is set."#~ msgstr "密码已设置。"#~ msgid "Password is not set."#~ msgstr "密码尚未设置。"#~ msgid "Disabled, set password to enable."#~ msgstr "禁用的，设置密码以启用。"#, fuzzy#~| msgid "Other ({})"#~ msgid "Other"#~ msgstr "其他 ({})"#, fuzzy#~| msgid "Portal"#~ msgid "Portable"#~ msgstr "门户"#, fuzzy#~| msgid "checking status"#~ msgid "Docking station"#~ msgstr "正在检查状态"#, fuzzy#~| msgctxt "GUI|User"#~| msgid "_Advanced..."#~ msgid "Advanced TCA"#~ msgstr "高级(_A)..."#, fuzzy#~| msgid "Enabled"#~ msgid "Tablet"#~ msgstr "已启用"#, fuzzy#~| msgid "IPv4 gateway"#~ msgid "IoT gateway"#~ msgstr "IPv4 网关"#, fuzzy#~| msgid "Single"#~ msgid "Single rank"#~ msgstr "单个磁盘"#, fuzzy#~| msgid "Preserve"#~ msgid "Present"#~ msgstr "保留"#, fuzzy#~| msgid "Synchronizing writes to disk"#~ msgid "Synchronized"#~ msgstr "将写入同步到磁盘"#, fuzzy#~| msgid "Synchronizing writes to disk"#~ msgid "Synchronized with $0"#~ msgstr "将写入同步到磁盘"#, fuzzy#~| msgid "Synchronizing writes to disk"#~ msgid "Synchronizing"#~ msgstr "将写入同步到磁盘"#, fuzzy#~| msgid "Not connected"#~ msgid "Not synchronized"#~ msgstr "未连接"#, fuzzy#~| msgid "Set timezone"#~ msgid "Set time"#~ msgstr "设置时区"#, fuzzy#~| msgid "Root password is not set"#~ msgid "Old password not accepted"#~ msgstr "Root 密码未设置"#, fuzzy#~| msgid "Failed to change a device."#~ msgid "Failed to change password"#~ msgstr "更改设备失败。"#, fuzzy#~| msgid "Root password is not set"#~ msgid "New password was not accepted"#~ msgstr "Root 密码未设置"#, fuzzy#~| msgid "Invalid timezone"#~ msgid "Invalid file permissions"#~ msgstr "无效的时区"#, fuzzy#~| msgid "Password is not set."#~ msgid "Password not accepted"#~ msgstr "密码尚未设置。"#~ msgctxt "GUI|User"#~ msgid "_Make this user administrator"#~ msgstr "将此用户设为管理员(_M)"#~ msgctxt "GUI|Custom Partitioning|Configure"#~ msgid "LUKS Version:"#~ msgstr "LUKS 版本："#~ msgid "Copying logs"#~ msgstr "复制日志"#~ msgctxt "GUI|Spoke"#~ msgid "_Root Password"#~ msgstr "根密码(_R)"#~ msgid "Add and mark for usage NTP servers"#~ msgstr "添加并标记为使用 NTP 服务器"#~ msgid "New NTP Server"#~ msgstr "新建 NTP 服务器"#~ msgid "Add NTP Server"#~ msgstr "增加 NTP 服务器"#~ msgid "This URL refers to a pool of NTP servers"#~ msgstr "该 URL 指向 NTP 服务器列表"#~ msgid "Server supports Network Time Security (NTS) authentication"#~ msgstr "服务器支持网络时间安全（NTS）认证"#~ msgid "Use"#~ msgstr "使用"#~ msgid ""#~ "The root account is used for administering the system. Enter a password "#~ "for the root user."#~ msgstr "root 帐户用于管理系统。为 root 用户输入密码。"#~ msgid "The maximum size \"%s\" is invalid."#~ msgstr "最大大小值 “%s” 无效。"#~ msgid ""#~ "NFS server must be specified as \"SERVER:/PATH\". Only one colon is "#~ "allowed in the url string."#~ msgstr ""#~ "NFS 服务器必须以 SERVER:/PATH 的形式指定。URL 字符串中仅允许有一个冒号。"#~ msgid "Would you like to ignore this and continue with installation?"#~ msgstr "您确定要忽略这个以继续安装吗？"#~ msgid "Error checking software dependencies"#~ msgstr "检查软件依赖关系时出错"#~ msgid "policy name required for %s"#~ msgstr "%s 需要策略名称"#~ msgid "A %(command)s with the name %(policyName)s has already been defined."#~ msgstr "已定义过名为 %(policyName)s 的命令 %(command)s 。"#~ msgid ""#~ "The pwpolicy command has been deprecated. It may be removed from future "#~ "releases, which will result in a fatal error when it is encountered. "#~ "Please modify your kickstart file to remove this command."#~ msgstr ""#~ "pwpolicy 命令已被弃用。安装过程中如遇此命令，则会导致致命错误，后续发行版"#~ "本中会将其移除。请修改您的 kickstart 文件，将此命令从中删除。"#~ msgid "Post-installation flatpak tasks"#~ msgstr "安装后 flatpak 任务"#~ msgid "Slaves"#~ msgstr "从属"#~ msgctxt "TUI|Spoke Navigation"#~ msgid "c"#~ msgstr "继续"#~ msgctxt "TUI|Spoke Navigation|Partitioning"#~ msgid "s"#~ msgstr "s"#~ msgctxt "TUI|Spoke Navigation|Time Settings"#~ msgid "b"#~ msgstr "b(开始)"#~ msgctxt "TUI|Spoke Navigation|Language Support"#~ msgid "b"#~ msgstr "b(开始)"#~ msgctxt "TUI|Spoke Navigation"#~ msgid "q"#~ msgstr "停止"#~ msgctxt "TUI|Spoke Navigation"#~ msgid "b"#~ msgstr "b(开始)"#~ msgid "Executing %s addon"#~ msgstr "执行 %s 附加组件"#~ msgid "Setting up %s addon"#~ msgstr "正在设置 %s 附加项"#~ msgid ""#~ "The ISO image %s has a size which is not a multiple of 2048 bytes. This "#~ "may mean it was corrupted on transfer to this computer.\n"#~ "\n"#~ "It is recommended that you exit and abort your installation, but you can "#~ "choose to continue if you think this is in error. Would you like to "#~ "continue using this image?"#~ msgstr ""#~ "ISO 镜像 %s 的大小不是 2048 字节的倍数。这可能是由于在将镜像传输到这台计算"#~ "机的过程中出现错误所致。\n"#~ "\n"#~ "建议退出并取消安装。如果您认为文件没有问题，那么也可以继续安装。要继续使用"#~ "该镜像文件吗？"#~ msgid ""#~ "The installer has tried to mount the installation image, but cannot find "#~ "it on the hard drive.\n"#~ "\n"#~ "Should I try again to locate the image?"#~ msgstr ""#~ "安装程序试图挂载安装镜像，但无法在硬盘上找到该镜像。\n"#~ "\n"#~ "要再次尝试查找镜像吗？"#~ msgid ""#~ "The group '%s' is required for this installation. This group does not "#~ "exist. This is a fatal error and installation will be aborted."#~ msgstr ""#~ "本次安装需要软件包组 '%s'。该软件包组不存在。这是一个致命错误，将中断本次"#~ "安装。"#~ msgid ""#~ "You have specified that the group '%s' should be installed. This group "#~ "does not exist. Would you like to ignore this group and continue with "#~ "installation?"#~ msgstr ""#~ "已指定要安装软件组 '%s'。但该软件组不存在。要忽略该软件组，然后继续安装进"#~ "程吗？"#~ msgid ""#~ "You have specified that the group '%s' should be excluded from "#~ "installation. This group does not exist. Would you like to ignore this "#~ "group and continue with installation?"#~ msgstr ""#~ "已指定在安装中排除 '%s' 软件组。但该软件组不存在。要忽略该软件组然后继续安"#~ "装进程吗？"#~ msgid ""#~ "Stream was not specified for a module without a default stream. This is a "#~ "fatal error and installation will be aborted. The details of this error "#~ "are:\n"#~ "\n"#~ "%(exception)s"#~ msgstr ""#~ "没有为没有默认流的模块指定流。这是一个严重的错误并将导致安装终止。错误详情"#~ "如下：\n"#~ "\n"#~ "%(exception)s"#~ msgid ""#~ "Multiple streams have been specified for a single module. This is a fatal "#~ "error and installation will be aborted. The details of this error are:\n"#~ "\n"#~ "%(exception)s"#~ msgstr ""#~ "为一个模块指定了多个流。这是一个严重的错误并将导致安装终止。错误详情如"#~ "下：\n"#~ "\n"#~ "%(exception)s"#~ msgid "eg: \"20 GB\", \"500mb\" (minus the quotation marks)"#~ msgstr "例如：\"20 GB\", \"500mb\" (去掉引号)"#~ msgctxt "GUI|Software Source|Media Check Dialog"#~ msgid "_Done"#~ msgstr "完成(_D)"#~ msgid "DEFAULT TITLE"#~ msgstr "默认标题"#~ msgctxt "GUI|Network|Wireless"#~ msgid "_Network Name"#~ msgstr "网络名称(_N)"#~ msgid "boot loader device"#~ msgstr "引导程序设备"#~ msgid "Testing availability..."#~ msgstr "正在测试可用性……"#~ msgid ""#~ "This platform requires /boot on a dedicated partition or logical volume. "#~ "If you do not want a /boot volume, you must place / on a dedicated non-"#~ "LVM partition."#~ msgstr ""#~ "该平台要求 /boot 在单独的分区或逻辑卷上。如果您不想要 /boot 卷，则必须"#~ "将 / 放在一个单独的非 LVM 分区上。"#~ msgctxt "GUI|Custom Partitioning"#~ msgid "_Reset All"#~ msgstr "全部重设(_R)"#~ msgid "The --biospart parameter of harddrive command is not supported!"#~ msgstr "不支持 harddrive 命令的 --biospart 参数！"#~ msgid "org.fedoraproject.AnacondaInstaller"#~ msgstr "org.fedoraproject.AnacondaInstaller"#~ msgid "Error setting up installation from HDD"#~ msgstr "设置从 HDD 的安装出错"#~ msgid ""#~ "The installation source is in use by the installer and cannot be changed."#~ msgstr "安装源正在被安装程序使用，无法修改。"#~ msgid "Linux on %s"#~ msgstr "位于 %s 上的 Linux 系统"#~ msgid ""#~ "<b>Tip:</b> Keep your user name shorter than 32 characters and do not use "#~ "spaces."#~ msgstr "<b>提示：</b>您的用户名长度要少于 32 个字符并且不能有空格。"#~ msgid ""#~ "Your root partition is less than %(size)s which is usually too small to "#~ "install %(product)s."#~ msgstr "你的 root 分区小于 %(size)s，而这样的容量通常无法安装 %(product)s。"#~ msgid "Cannot relabel already existing file system."#~ msgstr "无法为已有文件系统重新设置标签。"#~ msgid "minute"#~ msgid_plural "minutes"#~ msgstr[0] "分钟"#~ msgid "The system needs more random data entropy"#~ msgstr "系统需要更多随机熵"#~ msgid "Entropy can be increased by typing randomly on keyboard"#~ msgstr "可以通过随机的敲打键盘来增加熵"#~ msgid ""#~ "After %d minutes, the installation will continue regardless of the amount "#~ "of available entropy"#~ msgstr "%d 分钟后，无论可用熵有多少，安装都会继续"#~ msgid ""#~ "Available entropy: %(av_entr)s, Required entropy: %(req_entr)s [%(pct)d %"#~ "%] (%(rem)d %(min)s remaining)"#~ msgstr ""#~ "可用熵：%(av_entr)s，还需要熵：%(req_entr)s [%(pct)d %%] (剩余 %(rem)d %"#~ "(min)s)"#~ msgid ""#~ "Available entropy: %(av_entr)s, Required entropy: %(req_entr)s [%(pct)d %"#~ "%]"#~ msgstr "可用熵：%(av_entr)s，还需要熵： %(req_entr)s [%(pct)d %%]"#~ msgid "Enough entropy gathered, please stop typing."#~ msgstr "已经有足够的熵了，请停止敲击键盘。"#~ msgid "Giving up, time (%d minutes) ran out."#~ msgstr "放弃，时间已到（%d 分钟）。"#~ msgid ""#~ "The system needs better quality of random data, you can improve it by "#~ "typing randomly on keyboard and moving your mouse. The installation will "#~ "continue automatically regardless of random data quality when time runs "#~ "out."#~ msgstr ""#~ "系统需要更高质量的随机数据，您可以通过随意敲击键盘、移动鼠标来提高质量。时"#~ "间超时的话，无论随机数据质量如何，安装都会自动继续。"#~ msgid "Random data quality:"#~ msgstr "随机数据质量："#~ msgid ""#~ "The following errors occurred with your partitioning:\n"#~ "\n"#~ "%(errortxt)s\n"#~ "\n"#~ "The installation will now terminate."#~ msgstr ""#~ "分区时出现以下错误：\n"#~ "\n"#~ "%(errortxt)s\n"#~ "\n"#~ "现在将终止此次安装。"#~ msgid ""#~ "An error has occurred - no valid devices were found on which to create "#~ "new file systems. Please check your hardware for the cause of this "#~ "problem."#~ msgstr ""#~ "出现错误 - 未找到要在其中创建新文件系统的有效设备。请检查您的硬件以找到问"#~ "题的起因。"#~ msgid ""#~ "Installation was stopped due to an error installing the boot loader. The "#~ "exact error message is:\n"#~ "\n"#~ "%s\n"#~ "\n"#~ "The installer will now terminate."#~ msgstr ""#~ "安装引导程序时出现错误导致安装停止。错误详细信息为：\n"#~ "\n"#~ "%s\n"#~ "\n"#~ "安装程序将终止。"#~ msgid "Generating updated storage configuration"#~ msgstr "正在生成更新后的存储配置"#~ msgid "storage configuration failed: %s"#~ msgstr "存储配置失败：%s"#~ msgid "No disks selected. Not saving changes."#~ msgstr "未选择磁盘。未保存更改。"#~ msgid "Volume Group name %s is already in use. Not saving changes."#~ msgstr "卷组名 %s 已经在使用。未保存更改。"#~ msgid "Invalid device name."#~ msgstr "无效设备名称。"#~ msgid "Passphrase for autopart encryption not specified."#~ msgstr "未指定用于 autopart 加密的口令。"#~ msgid "Unexpected storage error"#~ msgstr "未知的存储错误"#~ msgid "You'll be able to make space available during custom partitioning."#~ msgstr "在自定义分区中您可以获得可用空间。"#~ msgid "Invalid container name"#~ msgstr "无效容器名称"#~ msgid ""#~ "<b>%(count)d disk; %(size)s capacity; %(free)s free space</b> "#~ "(unpartitioned and in file systems)"#~ msgid_plural ""#~ "<b>%(count)d disks; %(size)s capacity; %(free)s free space</b> "#~ "(unpartitioned and in file systems)"#~ msgstr[0] ""#~ "<b>%(count)d 个磁盘；容量 %(size)s；空闲空间 %(free)s</b> (包括未分区及文"#~ "件系统内的部分)"